Tunable Josephson Generator for Qubit Excitation and Two‐Tone Spectroscopy
M. M. Khrenov, Rustam D. Yusupov, Georgy I. Gubochkin, V. A. Vozhakov, Ivan A. Nazhestkin, A. D. Belanovsky, A. S. Ionin, P. A. Gladilovich, G. S. Khismatullin, Lyudmila V. Filippenko, M. Yu. Fominskii, V. P. Koshelets, M. Yu. Kupriyanov, V. V. Ryazanov, Nataliya Maleeva, N. V. Klenov, Igor I. Soloviev, Dmitry S. Yakovlev
ABSTRACT We present a tunable Josephson generator that enables direct qubit excitation and two‐tone spectroscopy while reducing cryogenic wiring complexity and thermal load. The device consists of a current‐biased Josephson junction integrated with a superconducting spiral resonator, forming a microwave source that operates at cryogenic temperatures. Unlike conventional qubit drive setups that require coaxial microwave lines from room temperature to the base stage, our system requires only a single direct current (DC) bias line from room temperature. The generated microwave signal is delivered to the qubit via a short coaxial line between the 4 K and 20 mK stages, significantly reducing wiring complexity, thermal load in the cryostat and leveraging unused volume at the 4 K stage. We demonstrate continuous‐wave excitation of a superconducting qubit and perform tunable two‐tone spectroscopy using the Josephson generator as the drive source, resolving qubit spectra with performance comparable to a standard microwave source. Our generator is characterized by low phase noise and can be phase‐locked to an external reference for enhanced stability. Operating at 4 K temperature, this self‐contained source offers a low‐noise, space‐efficient solution for qubit control and spectroscopy, paving the way for scalable cryogenic quantum control architectures.
ABSTRACT We present a tunable Josephson generator that enables direct qubit excitation and two‐tone spectroscopy while reducing cryogenic wiring complexity and thermal load. The device consists of a current‐biased Josephson junction integrated with a superconducting spiral resonator, forming a microwave source that operates at cryogenic temperatures. Unlike conventional qubit drive setups that require coaxial microwave lines from room temperature to the base stage, our system requires only a single direct current (DC) bias line from room temperature. The generated microwave signal is delivered to the qubit via a short coaxial line between the 4 K and 20 mK stages, significantly reducing wiring complexity, thermal load in the cryostat and leveraging unused volume at the 4 K stage. We demonstrate continuous‐wave excitation of a superconducting qubit and perform tunable two‐tone spectroscopy using the Josephson generator as the drive source, resolving qubit spectra with performance comparable to a standard microwave source. Our generator is characterized by low phase noise and can be phase‐locked to an external reference for enhanced stability. Operating at 4 K temperature, this self‐contained source offers a low‐noise, space‐efficient solution for qubit control and spectroscopy, paving the way for scalable cryogenic quantum control architectures.
For superconducting quantum processors, microwave signals are delivered to each qubit from room-temperature electronics to the cryogenic environment through coaxial cables. Limited by the heat load of cabling and the massive cost of electronics, such an architecture is not viable for millions of qubits required for fault-tolerant quantum computing. Monolithic integration of the control electronics and the qubits provides a promising solution, which, however, requires a coherent cryogenic microwave pulse generator that is compatible with superconducting quantum circuits. Here, we report such a signal source driven by digital-like signals, generating pulsed microwave emission with well-controlled phase, intensity, and frequency directly at millikelvin temperatures. We showcase high-fidelity readout of superconducting qubits with the microwave pulse generator. The device demonstrated here has a small footprint, negligible heat load, great flexibility to operate, and is fully compatible with today's superconducting quantum circuits, thus providing an enabling technology for large-scale superconducting quantum computers.
Noisy voltage sources can be a limiting factor for both fundamental physics experiments and device applications in quantum information, mesoscopic circuits, magnetometry, and other fields. The best commercial dc voltage sources can be programmed to approximately six digits and have intrinsic noise in the microvolt range. On the other hand, the noise levels in metrological Josephson-junction-based voltage standards is subfemtovolt. Although such voltage standards can be considered “noiseless,” they are generally not designed for continuous tuning of the output voltage nor for supplying current to a load at cryogenic temperatures. We propose a Josephson-effect-based voltage , as opposed to a voltage standard, operating in the 30 − 160 − μ V range, which can supply over 100 nA of current to loads at mK temperatures. We describe the operating principle, the sample design, and the calibration procedure to obtain continuous tunability. We show the current-voltage characteristics of the device, demonstrate how the voltage can be adjusted without dc control connections to room-temperature electronics, and showcase an experiment coupling the source to a mesoscopic load: a small Josephson junction. Finally, we characterize the performance of our source by measuring the voltage noise at the load, 50 pV rms, which is attributed to parasitic resistances in the cabling. This work establishes the use of the Josephson effect for voltage biasing of extremely sensitive quantum devices.
Scaling quantum processors requires cryogenic microwave components to minimize thermal load and wiring complexity. However, conventional microwave components such as mixers and phase shifters perform poorly at millikelvin temperatures. Here, we report an SrTiO 3 (STO)-based microwave frequency mixer and phase shifter operating at sub-Kelvin temperatures. Utilizing the effective χ (2) nonlinearity of STO in the quantum paraelectric state, induced by a static or oscillating field, we achieve efficient microwave frequency mixing. Our device features an aluminum superconducting coplanar waveguide resonator on STO, which resonantly enhances mixing characteristics. The exceptionally high field-tunable dielectric constant of STO—approximately 30,000—allows for highly compact architectures and facilitates voltage-controlled phase shifting. Furthermore, we demonstrate multi-tone frequency mixing via phase modulation, facilitating spectral filtering and shaping. These STO-based devices provide a transformative approach to the generation of intricate microwave waveforms, tailoring control and readout signals in multi-qubit systems and paving the way for co-located quantum-classical integration.
Quantum computers with thousands or millions of qubits will require a scalable solution for qubit control and readout electronics. Colocating these electronics at millikelvin temperatures has been proposed and demonstrated, but there exist significant challenges with power dissipation, reproducibility, fidelity, and scalability. In this article, we experimentally demonstrate the use of a Josephson arbitrary waveform synthesizer (JAWS) to generate control signals at 4 K and perform spectroscopy of two components of a typical superconducting quantum information system: a linear resonator and a (nonlinear) transmon qubit. By locating the JAWS chip at 4 K and a qubit at 0.1 K, the direct path for quasi-particle poisoning from the JAWS chip to the qubit is broken. We demonstrate the stable, self-calibrated, and reproducible output signal of the JAWS when operated in its quantum locking range, a feature that allows these synthesizers to be replicated and scaled in the cryostat, all with identical on-chip, quantized, outputs. This is a proof-of-concept demonstration to generate signals at 4 K using driven superconducting electronics to control qubits at lower temperatures.
Comparative study of high-Jc and low-Jc SFQ microwave generators for transmon control
Abstract Scalability of superconducting quantum processors is increasingly constrained by the thermal load and wiring overhead associated with room-temperature control hardware. Cryogenic control interfaces based on single-flux-quantum (SFQ) logic offer a potential route to alleviating these bottlenecks, although their dissipation depends sensitively on the Josephson-junction critical current and the underlying fabrication process. In this work, we comparatively investigate SFQ-synthesized microwave generators implemented in high- and low-critical-current processes, and evaluate their suitability for transmon qubit control through a combination of experimental characterization and hybrid QuTiP–JoSIM analysis. By modulating SFQ pulse intervals, we synthesize coherent microwave drives and obtain single-qubit gate fidelities above 99.9% at 10 mK in QuTiP-based simulations for both implementations. The low- Jc J c implementation exhibits reduced phase-noise-induced error, achieves higher gate fidelity within its valid bias window, and shows improved robustness against frequency detuning, while the high- Jc J c implementation maintains a lower broadband noise floor. Using an explicit model of thermal dissipation and circuit footprint, we further estimate the integration limits of cryogenic control channels. The results show that reducing the switching current substantially relaxes the cooling-budget constraint and increases the number of channels that can be deployed simultaneously. These results clarify the trade-offs associated with implementing SFQ microwave generators in different fabrication processes and provide practical guidance for the design of scalable cryogenic qubit-control interfaces.
Compared to traditional semiconductor control electronics (TSCE) located at room temperature, cryogenic single flux quantum (SFQ) electronics can provide qubit measurement and control alternatives that address critical issues related to scalability of cryogenic quantum processors. Single-qubit control and readout have been demonstrated recently using SFQ circuits coupled to superconducting qubits. Experiments where the SFQ electronics are co-located with the qubit have suffered from excess decoherence and loss due to quasiparticle poisoning of the qubit. A previous experiment by our group showed that moving the control electronics to the 3 K stage of the dilution refrigerator avoided this source of decoherence in a high-coherence 3D transmon geometry. In this paper, we also generate the pulses at the 3 K stage but have optimized the qubit design and control lines for scalable 2D transmon devices. We directly compare the qubit lifetime T1, coherence time T2∗ and gate fidelity when the qubit is controlled by the Josephson pulse generator (JPG) circuit versus the TSCE setup. We find agreement to within the daily fluctuations for T1 and T2∗, and agreement to within 10% for randomized benchmarking. We also performed interleaved randomized benchmarking on individual JPG gates demonstrating an average error per gate of 0.46% showing good agreement with what is expected based on the qubit coherence and higher-state leakage. These results are an order of magnitude improvement in gate fidelity over our previous work and demonstrate that a Josephson microwave source operated at 3 K is a promising component for scalable qubit control.