Quantum computing is advancing rapidly, driven by the increasing capabilities of quantum hardware. However, as devices scale to hundreds of qubits, the presence of high error rates during execution poses a substantial challenge to obtaining reliable and high-fidelity results. Recent approaches have utilized the Hamming spectrum to reconstruct noisy output distributions, improving the proximity of measurement results to the correct solution. In this work, we propose AbS-Q: an effective post-processing model for signal recovery from noisy quantum outputs. AbS-Q integrates structural information from the Hamming spectrum with convolutional deep learning to enhance the ranking and recovery of correct results. In our evaluations, we demonstrate that AbS-Q outperforms existing Hammingbased post-processing techniques in recovering accurate outputs, highlighting its potential as a scalable error mitigation strategy.
Quantum computing is advancing rapidly, driven by the increasing capabilities of quantum hardware. However, as devices scale to hundreds of qubits, the presence of high error rates during execution poses a substantial challenge to obtaining reliable and high-fidelity results. Recent approaches have utilized the Hamming spectrum to reconstruct noisy output distributions, improving the proximity of measurement results to the correct solution. In this work, we propose AbS-Q: an effective post-processing model for signal recovery from noisy quantum outputs. AbS-Q integrates structural information from the Hamming spectrum with convolutional deep learning to enhance the ranking and recovery of correct results. In our evaluations, we demonstrate that AbS-Q outperforms existing Hammingbased post-processing techniques in recovering accurate outputs, highlighting its potential as a scalable error mitigation strategy.
The susceptibility to decoherence is significantly high in quantum computing systems, and the latter effect significantly compromises the computational reliability, particularly in Noisy Intermediate-Scale Quantum (NISQ) computers. Even though the existing mitigation strategies are currently focused on hardware-level error correction and pulselevel noise mitigation, system-level execution variables (by far, the most notable of them being waiting times caused by queues) can also contribute to the worsening of fidelity degradation, but this is hardly addressed. In its turn, this manuscript suggests an AI-based decoherence mitigation framework, in which the time spent in the queue is incorporated into fidelity prediction and scheduling. The framework elucidates the interrelations between quantum-state fidelity and waiting time through a physics-informed decoherence formulation, which is followed by the use of machine-learning to predict degradation of fidelity prior to circuits execution. Based on the estimated measures of fidelity, decoherence-aware scheduling algorithms are presented to either give priority or re-scheduling to quantum jobs that become highly disturbed by the coherence loss. The viability of integrating the AI-based predictive mechanisms into the system-level quantum computing processes is shown through simulation-based assessment, which indicates that the suggested methodology can improve the effective fidelity of the implemented quantum jobs as compared to the traditional scheduling approaches. The findings indicate that AI-supported software-level alleviation mechanisms can be used as an effective and efficient enhancement of the dependability of nearterm quantum computing systems due to their scalability and use of hardware as the basis of the error reduction approach.
Current quantum computers present significant noise, especially as circuit depth and qubit count increase. Prior work has demonstrated that erroneous outcomes exhibit some behavior in Hamming space, enabling improvements in the output distributions of NISQ-era computers. We present HAMMR-L: a principled post-processing technique for improving the fidelity of output distributions by applying Richardson-Lucy image deconvolution on a state graph of measurement results connected by Hamming distance. We show that this preliminary implementation of HAMMR-L outperforms existing cutting-edge Hamming-based post-processors such as QBEEP while being circuit and hardware agnostic, which QBEEP is not. HAMMR-L also demonstrates clear potential for future improvements and we discuss how such improvements might be realized while highlighting the strengths, limitations, and generality of the underlying concept.
Abstract Quantum computing has recently emerged as a novel paradigm for solving problems otherwise intractable on classical computers, yet the practical progress of quantum computers is severely impacted by noise, decoherence, and imperfect gate operations in Noisy Intermediate-Scale Quantum (NISQ) devices. Specific to IBM Quantum hardware, imperfections due to readout error, gate errors, and device drift, which depends on time, resolves limits for the accuracy of outputs from our algorithms. The mitigation strategies currently used, for example, Measurement Error Mitigation (MEM), Zero Noise Extrapolation (ZNE), and Clifford Data Regression (CDR), offer improvement over raw, unmitigated outputs, but they are static and not dynamic; the reduction of noise in within an NISQ device is temporal and can vary in patterns that are non-zero. In addition to this, using the conventional methods provides inconsistent and suboptimal results.This study will provide enhanced reliability with respect to performing quantum computation on IBM Quantum hardware with a unique mitigation framework that is adaptive and computationally efficient for a high-fidelity output. The problem taken on here is the failure of existing error mitigation strategies to provide adaptive noise compensation, as they assume a statically-distributed error, despite the performance-related characteristics already being documented in regards to calibration drift and variation over time.To achieve this, we propose a Hybrid Adaptive Error Mitigation (HAEM) approach that includes baseline measurement error mitigation and an additional correction layer that utilizes realtime calibration information, along with lightweight machine learning models. The approach can be broken down into three steps: (i) perform standard measurement error mitigation to reduce classical readout noise, (ii) execute compact calibration circuits, such as Bell states, GHZ states and Clifford benchmarks to capture then current error profile of the device, and (iii) use a lightweight machine learning model (having been trained on historical and newest calibration data) to dynamically change the mitigation weights applied for the target quantum algorithm. All implementation is done using Qiskit Runtime to ensure low-latency execution, and we completed experiments on both Qiskit Aer noisy simulators and IBM Quantum devices.Initial results suggest HAEM improved the outputs of quantum algorithms' fidelity compared to the unmitigated runs and the baseline measurement error mitigation (MEM) runs. On the noisy simulators, HAEM increased fidelity from a raw performance of 0.65 to 0.87, nearly a 34% improvement. In fairer hardware-like scenarios, fidelity-on-average was persistently 12% better than MEM, with nearly equal time duration for the additional adaptive measurements. The adaptive aspect of HAEM consistently supported subsequent calibration cycles of the device and was effective to continue providing fidelity improvements despite the static mitigation performance degrading.To sum up, the proposed HAEM framework is a modern and viable alternative for error mitigation which brings together the benefits of baseline approaches with corrections that are driven by fixed-function error-corrective, adaptive learning. As both learning-based and standard baseline approaches can only achieve fixed levels of performance, HAEM, through its use of noise mitigation both at execution time and through correlating it with standard data, provides a route towards reliable quantum computations on current IBM hardware. HAEM also presents a contribution to the NISQ error-resilient landscape, and however it is intended that it will continue to improve future applications of hybrid workflows of quantum and classical computation where error mitigation and resilience is important.
This work focuses on the design and evaluation of Hybrid Quantum Neural Networks (HQNNs) that integrate the computational advantages of quantum circuits with the learning flexibility of classical deep neural networks to enhance machine learning performance in the Noisy Intermediate-Scale Quantum (NISQ) era.The study investigates two prominent HQNN architectures, namely Quantum Convolutional Neural Networks (QCNNs) and Quanvolutional Neural Networks (QuanNNs), with an emphasis on their robustness under realistic quantum noise conditions.It was evaluated using image classification tasks.Under various quantum noise channels, including Bit Flip, Phase Flip, Phase Damping, Amplitude Damping, and Depolarizing Noise, were introduced to reflect realistic hardware conditions.To reduce noise-induced performance loss, error mitigation techniques such as Zero-Noise Extrapolation, Probabilistic Error Cancellation, and Measurement Error Mitigation were applied.In addition, an AI-assisted adaptive framework is proposed to automatically recommend suitable mitigation strategies based on observed noise behavior and circuit characteristics.Experimental results indicate that QuanNN exhibits strong robustness under lowto-moderate noise levels and maintains stable performance even under high bit-flip noise, while QCNN demonstrates occasional performance gains under specific noisy configurations but degrades more rapidly as noise intensity increases.The proposed AI-guided mitigation mechanism further enhances model stability across varying noise regimes.This study provides practical insights into architecture selection, noise resilience, and intelligent error mitigation integration, offering a scalable framework for deploying HQNNs in real-world NISQ-era quantum machine learning applications.
Despite rapid advances in quantum hardware, noise remains a central obstacle to deploying quantum algorithms on near-term devices. In particular, random coherent errors that accumulate during circuit execution constitute a dominant and fundamentally challenging noise source. We introduce a noise-resilient framework for Quantum Signal Processing (QSP) that mitigates such coherent errors without increasing circuit depth or ancillary qubit requirements. Our approach uses ensembles of noisy QSP circuits combined with measurement-level averaging to suppress random phase errors in Z rotations. Building on this framework, we develop robust QSP algorithms for implementing polynomial functions of Hermitian matrices and for estimating observables, with applications to Hamiltonian simulation, quantum linear systems, and ground-state preparation. We analyze the trade-off between approximation error and hardware noise, which is essential for practical implementation under the stringent depth and coherence constraints of current quantum hardware. Our results establish a practical pathway for integrating error mitigation seamlessly into algorithmic design, advancing the development of robust quantum computing, and enabling the discovery of scientific applications with near- and mid-term quantum devices.
Quantum computers have the potential to outperform classical computers for some complex computational problems. However, current quantum computers (e.g., from IBM and Google) have inherent noise that results in errors in the outputs of quantum software executing on the quantum computers, affecting the reliability of quantum software development. The industry is increasingly interested in machine learning (ML)-based error mitigation techniques, given their scalability and practicality. However, existing ML-based techniques have limitations, such as only targeting specific noise types or specific quantum circuits. This paper proposes a practical ML-based approach, called Q-LEAR, with a novel feature set, to mitigate noise errors in quantum software outputs. We evaluated Q-LEAR on eight quantum computers and their corresponding noisy simulators, all from IBM, and compared Q-LEAR with a state-of-the-art ML-based approach taken as baseline. Results show that, compared to the baseline, Q-LEAR achieved a 25% average improvement in error mitigation on both real quantum computers and simulators. We also discuss the implications and practicality of Q-LEAR, which, we believe, is valuable for practitioners.