Integrated optics is one of the most promising platforms for quantum technologies. Integrated nonlinear waveguides have been used for the generation of quantum states of light for several applications. Here we discuss a project for the generation of squeezed vacuum in periodically poled waveguides made on a lithium niobate substrate. This non-classical optical state has been used for enhancing high precision measurements in gravitational wave detectors. However, in this application bulk sources of squeezed vacuum states have been employed. Integrated optics can provide a more robust and reliable way for the generation of these states which have great potential not only for interferometric GW detectors, but also for other high-precision optical measurements as well as for quantum computing purposes.
Integrated optics is one of the most promising platforms for quantum technologies. Integrated nonlinear waveguides have been used for the generation of quantum states of light for several applications. Here we discuss a project for the generation of squeezed vacuum in periodically poled waveguides made on a lithium niobate substrate. This non-classical optical state has been used for enhancing high precision measurements in gravitational wave detectors. However, in this application bulk sources of squeezed vacuum states have been employed. Integrated optics can provide a more robust and reliable way for the generation of these states which have great potential not only for interferometric GW detectors, but also for other high-precision optical measurements as well as for quantum computing purposes.
During the recent years an international network of interferometric gravitational wave (GW) detectors has been commissioned and searches for various classes of GWsignals are ongoing.Although the observatories are beginning to reach astrophysically interesting sensitivity levels, extensive upgrades are aimed for the next decade bringing us into the era of gravitational wave astronomy.One approach to enhance the detector sensitivity is the injection of squeezed vacuum states of light replacing the vacuum fluctuations entering the detector through its antisymmetric port.In this thesis the unprecedented generation of squeezed vacuum states with a noise power 6.5 dB below vacuum noise within the entire detection bandwidth of ground-based GW-detectors (10 Hz -10 kHz) was experimentally demonstrated at a wavelength of 1064 nm.For the first time a coherent control scheme was employed for comprehensive phase control of the experimental setup.This scheme is directly applicable to future GW-detector topologies.In addition, parasitic interference induced by scattered light was found to be a dominant noise source degrading squeezed states in the audio band.The compatibility of squeezed field injection into a detuned operated dual-recycled Michelson interferometer was demonstrated in a table top experiment.A detected non-classical sensitivity improvement of up to 3.0 dB within the entire detection bandwidth (5 -15 MHz) was accomplished by optimal preparation of the injected squeezing by means of a detuned locked filter cavity.In a further experiment strongly squeezed vacuum states were generated in the MHz-regime.With a maximum measured quantum noise reduction of 11.5 dB below the shot noise limit a new benchmark was set.This was achieved by suppression of phase noise and a remarkable reduction of optical loss in the experimental setup.Based on the squeezed light sources developed in this thesis and the experimental results achieved, a conceptual design of a compact squeezed light source was devised, allowing for a high duty cycle sensitivity improvement of GW-detectors.
Squeezed states of light are used for precision metrology and quantum-enhanced measurements, with applications spanning communication and sensing. State-of-the-art squeezed-light sources typically rely on optical cavities to achieve high, usable levels of squeezing. Recently, waveguide-based squeezed-light sources have demonstrated significant improvements in achievable squeezing, with performance currently limited by fabrication-induced losses. In this work, we present a detailed analysis of waveguide-based squeezers, examining the effects of phase noise, multiple loss mechanisms, and fundamental light leakage seeding the squeezer. We further investigate a cascaded squeezer architecture, in which a second waveguide operates as a phase-sensitive amplifier to mitigate out-coupling and detection losses. Owing to their ease of integration, robustness to high pump powers, and low intrinsic phase noise, we propose waveguide-based squeezed-light sources as a promising alternative for quantum noise reduction in future gravitational wave detectors, such as the Einstein Telescope.
The worldwide network of laser interferometric gravitational-wave detectors is currently in an upgrade phase and will most likely detect gravitational waves within the next few years. Their strain sensitivity will be limited by photon shot noise over a large frequency band. A measurement beyond the shot noise level has already been accomplished via injecting squeezed vacuum states of light into the interferometers. In this proceeding, I review the current status in developements for the next-generation squeezed-light sources for future gravitational-wave detectors. A newly designed doubly-resonant squeezed light source is discussed, as well as squeezed light generated at the wavelengths of 1550 nm and 532 nm. Furthermore, high efficiency second harmonic generation of laser light for gravitational wave detectors will be presented. The injection of squeezed light as a key technology is well on schedule for improving the sensitivity of future gravitational-wave detectors.
Non-classical squeezed states of light are becoming increasingly important to a range of metrology and other quantum optics applications in cryptography, quantum computation and biophysics. Applications such as improving the sensitivity of advanced gravitational wave detectors and the development of space-based metrology and quantum networks will require robust deployable vacuum-compatible sources. To date non-linear photonics devices operated under high vacuum have been simple single pass systems, testing harmonic generation and the production of classically correlated photon pairs for space-based applications. Here we demonstrate the production under high-vacuum conditions of non-classical squeezed light with an observed 8.6 dB of quantum noise reduction down to 10 Hz. Demonstration of a resonant non-linear optical device, for the generation of squeezed light under vacuum, paves the way to fully exploit the advantages of in-vacuum operations, adapting this technology for deployment into new extreme environments.
The ability to directly detect gravitational waves will open a completely new branch of astronomy to view the Universe, one that is inaccessible to electromagnetic-based astronomy. First generation ground-based interferometric gravitational-wave detectors have achieved strain sensitivities of order one part in ten to the twenty-one, at 100 Hz detection frequency. A new generation of detectors are under construction, designed to improve on the sensitivity of the first-generation detectors by a factor of 10. The quantum nature of light will broadly limit the sensitivity of these new instruments. This quantum noise will originate from the quantum vacuum fluctuations that enter the unused port of the interferometer. One of the most promising options for reducing the quantum noise impact and further increasing the sensitivity is applying quantum squeezed vacuum states. These squeezed states have lower noise in one quadrature than the vacuum state. By replacing the quantum vacuum fluctuations entering the interferometer with squeezed vacuum states, the quantum noise impact is reduced. This thesis firstly details the development of a squeezed light source that produces squeezed states applicable for enhancing interferometric gravitational-wave detectors. A doubly-resonant, travelling-wave bow-tie cavity squeezed light source is presented. For the first time, greater than 10 dB of quantum noise suppression across the gravitational-wave detection band is directly observed, and 11.6 dB of quantum noise suppression is observed above 200 Hz. This squeezing cavity design also has benefits with intrinsic isolation to backscattered light. Experiments that quantify this isolation are reported. The properties affecting squeezing magnitude and low-frequency squeezing measurement are discussed. In addition, a modified squeezing-ellipse-phase control technique for squeezed vacuum states is presented. This thesis secondly presents results from the LIGO Squeezed Light Injection Experiment, undertaken to test squeezed light injection into a 4 km interferometric gravitational-wave detector. The results of the experiment show the first measurement of squeezing-enhancement in a 4 km gravitational-wave detector, with 2.15 dB measured above 250 Hz. This represents the best sensitivity to gravitational waves yet achieved at these frequencies by any single gravitational-wave detector to date. An unknown area was whether the addition of a squeezer would introduce noise couplings that degrade the crucial low frequency sensitivity. The results demonstrate that injected squeezed states are compatible with low frequency gravitational-wave measurement. The characterisation of squeezing-injection optical losses and fluctuations of the squeezing angle are also reported. The knowledge and processes gained, from both the squeezed light source development work and the LIGO Squeezed Light Injection Experiment, will inform the design, planning and implementation of squeezed states in future gravitational-wave detectors.
The first detections of gravitational waves have opened an exciting new field of astronomy. One of the most fundamental limitations for the sensitivity of current and future interferometric gravitational-wave detectors is imposed by the quantum nature of light: Quantum vacuum fluctuations entering the interferometer through the readout port will contribute to the detection noise, at high frequencies in the form of shot noise and at low frequencies by radiation pressure noise. A promising way to reduce this quantum noise is the injection of squeezed states of light that have a lower uncertainty in one quadrature than the vacuum state. The GEO 600 gravitational-wave detector demonstrated the use of squeezed light in 2010 and it is now the first detector to routinely apply squeezing to improve its sensitivity beyond the limits set by classical quantum shot noise. This thesis details the practical aspects of long-term stable and efficient squeezed-light integration in a large-scale gravitational-wave detector. Imperfections that can limit the amount of observable non-classical noise improvement, such as optical losses and phase fluctuations, were studied in detail and methods for their mitigation were developed. Novel control schemes for the active stabilisation of the squeezed light field's phase and alignment were one main focus of the investigations. At the same time, important experience was gathered in the operation of the squeezed light source over long timescales. Over the course of the thesis work, improvements were implemented that significantly increased the performance of the squeezed-light application. Squeezing was injected with an overall duty cycle of 88%, reaching a noise reduction of up to 4.4 dB, corresponding to a 40% lowered shot-noise level. This work has firmly established the practical application of squeezing as a mature technology. The gained knowledge will directly inform the implementation of squeezed light for all future gravitational-wave detectors.