Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

High-dimensional quantum X Y Z product codes for biased noise

Zhipeng Liang, Zhengzhong Yi, Fusheng Yang, Jiahan Chen, Zicheng Wang, Xuan Wang

Published Nov 19, 2025• 0 citations
Publisher

Abstract

The three-dimensional (3D) quantum XYZ product can construct a class of non-Calderbank-Shor-Stearne (non-CSS) quantum codes by using three classical codes. However, there has been limited study on their error-correcting performance so far and whether this code construction can be generalized to higher dimension is an open question. In this paper, we first study the error-correcting performance of the 3D Chamon code, which is an instance of the 3D XYZ product of three repetition codes. Second, we show that the 3D XYZ product can be generalized to four dimensions and propose four-dimensional (4D) XYZ product code construction, which constructs a class of non-CSS quantum codes by using either four classical codes or two CSS quantum codes. Compared with the 4D homological product, we show that the 4D XYZ product can construct non-CSS codes with higher code dimension or code distance. Third, we consider two instances of the 4D XYZ product, which we refer to as the 4D Chamon code and the 4D XYZ product concatenated code, respectively. Our simulation results show that the 4D XYZ product can construct non-CSS codes with better error-correcting performance against Pauli-$Z$-biased noise than CSS codes constructed by the 4D homological product. Finally, we present the geometric arrangement of the 4D Chamon code within a 4D cubic lattice, demonstrating that it possesses two key characteristics of fracton models, which strongly suggest that it is a novel 4D fracton model.

DOI
10.1103/rrfk-1b51

Related papers

High-dimensional quantum XYZ product codes for biased noise

Zhipeng Liang, Zhengzhong Yi, Fusheng Yang +3 more

Three-dimensional (3D) quantum XYZ product can construct a class of non-CSS quantum codes by using three classical codes. However, there has been limited study on their error-correcting performance so far and whether this code construction can be generalized to higher dimension is an open question. In this paper, we first study the error-correcting performance of the 3D Chamon code, which is an instance of the 3D XYZ product of three repetition codes. Second, we show that the 3D XYZ product can be generalized to four dimension and propose four-dimensional (4D) XYZ product code construction, which constructs a class of non-CSS quantum codes by using either four classical codes or two CSS quantum codes. Compared with the 4D homological product, we show that the 4D XYZ product can construct non-CSS codes with higher code dimension or code distance. Third, we consider two instances of the 4D XYZ product, to which we refer as the 4D Chamon code and the 4D XYZ product concatenated code, respectively. Our simulation results show that, the 4D XYZ product can construct non-CSS codes with better error-correcting performance against Pauli-$Z$-biased noise than CSS codes constructed by the 4D homological product. Finally, we present the geometric arrangement of the 4D Chamon code within a 4D cubic lattice, demonstrating that it possesses two key characteristics of fracton models, which strongly suggest that it is a novel 4D fracton model.

arXiv:2408.03123•Aug 6, 2024•0 citations

Coupled-Layer Codes: Beyond Quantum Product Constructions

Shuyu Zhang, Tzu-Chieh Wei, Nathanan Tantivasadakarn

Product codes are an important class of quantum error-correcting codes constructed from multiple input codes, which can give rise to asymptotically good quantum low-density parity check codes. In previous work, we showed how the product between two codes can be physically implemented by coupling layers of the first code using checks of the second code. In this work, we further unify product code constructions with coupled-layer constructions of phases of matter by introducing coupled-layer codes. The essential strategy is to condense general excitations created by Pauli operators among multiple decoupled layers of the first code. The condensation is specified by an excitation algebra, which encodes the excitations, along with an algebra-preserving map. This coupling between layers generalizes the notion of gauging in physics as well as the mapping cone in homological algebra, and can be used to produce non-CSS codes. As examples, we show how coupled-layer codes reproduce the X-cube and Chamon models. We further generalize the balanced product code by allowing a unitary transformation in addition to a group action by free permutation and describe its corresponding coupled-layer construction. In particular, we show how balancing by a ZX-duality can reproduce non-CSS codes such as the fermionic toric code and the 3-fermion Walker-Wang model in 3D.

quant-pharXiv:2608.10069•Aug 12, 2026•0 citations

Quantum XYZ Product Codes

Anthony Leverrier, Simon Apers, Christophe Vuillot

We study a three-fold variant of the hypergraph product code construction, differing from the standard homological product of three classical codes. When instantiated with 3 classical LDPC codes, this "XYZ product" yields a non CSS quantum LDPC code which might display a large minimum distance. The simplest instance of this construction, corresponding to the product of 3 repetition codes, is a non CSS variant of the 3-dimensional toric code known as the Chamon code. The general construction was introduced in Denise Maurice's PhD thesis, but has remained poorly understood so far. The reason is that while hypergraph product codes can be analyzed with combinatorial tools, the XYZ product codes also depend crucially on the algebraic properties of the parity-check matrices of the three classical codes, making their analysis much more involved.Our main motivation for studying XYZ product codes is that the natural representatives of logical operators are two-dimensional objects. This contrasts with standard hypergraph product codes in 3 dimensions which always admit one-dimensional logical operators. In particular, specific instances of XYZ product codes with constant rate might display a minimum distance as large as Θ(N2/3) . While we do not prove this result here, we obtain the dimension of a large class of XYZ product codes, and when restricting to codes with dimension 1, we reduce the problem of computing the minimum distance to a more elementary combinatorial problem involving binary 3-tensors. We also discuss in detail some families of XYZ product codes that can be embedded in three dimensions with local interaction. Some of these codes seem to share properties with Haah's cubic codes and might be interesting candidates for self-correcting quantum memories with a logarithmic energy barrier.

arXiv:2011.09746•Quantum•Jul 14, 2022•12 citations

The four-dimensional Chamon code

Zhipeng Liang, Xuan Wang

Fracton models have attracted considerable interest as candidates for quantum memories because of their unconventional ground-state degeneracy (GSD) and restricted-mobility excitations. The four-dimensional (4D) Chamon code introduced in our previous work is constructed via the 4D XYZ product of two two-dimensional (2D) toric codes. Its GSD grows exponentially with the system size, similar to that of the three-dimensional (3D) Chamon code, suggesting that it may be regarded as a 4D generalization of the 3D Chamon code. However, the excitation properties of the 4D Chamon code have not been studied in depth, and a high-performance decoding strategy is still lacking. In this work, we first establish the correspondence between the algebraic structure of the 4D Chamon code and the 4D lattice, thereby characterizing the geometric distributions of qubits and stabilizers. Second, we show that the 4D Chamon code supports three types of restricted-mobility excitations analogous to those of the 3D Chamon code, further supporting its interpretation as a 4D generalization of the 3D Chamon code. Finally, we uncover two structural properties relevant to decoding: a hyperplane symmetry and a projection-induced 2D toric-code structure. By exploiting these properties, we develop a two-layer decoding strategy that decomposes the original decoding problem into multiple independent and parallelizable subproblems. Numerical simulations show that the proposed decoder substantially outperforms BP-OSD in decoding accuracy, demonstrating the benefit of incorporating the intrinsic geometric and algebraic structures of the code into decoder design.

quant-pharXiv:2608.20775•Aug 24, 2026•0 citations

Quantum XYZ Stabilizer Codes

Alessio Baldelli, Davide Orsucci, Francisco Lázaro +1 more

Stabilizer codes are often constructed within the Calderbank--Shor--Steane (CSS) framework, where two mutually orthogonal binary classical codes define $X$ and $Z$-type stabilizer generators. While this structure is algebraically convenient, additional non-CSS constraints may help suppress low-weight logical operators and improve decoding performance in the finite-length regime. We thus introduce quantum XYZ stabilizer codes, whose parity-check matrix (PCM) is built from three pairwise orthogonal binary PCMs associated with $X$-, $Y$-, and $Z$-type stabilizer generators. A nontrivial point is that an XYZ code instance is not automatically genuinely non-CSS: the same stabilizer group may admit a CSS generating set. We characterize this collapse, obtaining algebraic and rank conditions for deciding when the $Y$-type checks are redundant and when they define genuinely non-CSS stabilizer constraints. We also derive upper and lower bounds on the quantum minimum distance, including bounds for mixed Pauli logical operators. The novel framework includes a known non-CSS topological code, namely the XYZ$^2$ hexagonal code, and yields also sparse finite-length quantum low-density parity-check (qLDPC) constructions from intersecting-subset and quasi-dyadic code families. Simulations under depolarizing code-capacity noise and quaternary belief propagation decoding show that the proposed XYZ qLDPC instances can outperform representative CSS qLDPC instances with similar finite-length parameters.

cs.ITCross-listedarXiv:2607.14988•Jul 17, 2026•0 citations

Classical product code constructions for quantum Calderbank-Shor-Steane codes

Dimiter Ostrev, Davide Orsucci, Francisco Lázaro +1 more

Several notions of code products are known in quantum error correction, such as hypergraph products, homological products, lifted products, balanced products, to name a few. In this paper we introduce a new product code construction which is a natural generalization of classical product codes to quantum codes: starting from a set of component Calderbank-Shor-Steane (CSS) codes, a larger CSS code is obtained where both X parity checks and Z parity checks are associated to classical product codes. We deduce several properties of product CSS codes from the properties of the component codes, including bounds to the code distance, and show that built-in redundancies in the parity checks result in so-called meta-checks which can be exploited to correct syndrome read-out errors. We then specialize to the case of single-parity-check (SPC) product codes which in the classical domain are a common choice for constructing product codes. Logical error rate simulations of a SPC 3 -fold product CSS code having parameters [[512,174,8]] are shown under both a maximum likelihood decoder for the erasure channel and belief propagation decoding for depolarizing noise. We compare the results with other codes of comparable length and dimension, including a code from the family of asymptotically good Tanner codes. We observe that our reference product CSS code outperforms all the other examined codes.

arXiv:2209.13474•Quantum•Jul 22, 2024•8 citations
The three-dimensional (3D) quantum XYZ product can construct a class of non-Calderbank-Shor-Stearne (non-CSS) quantum codes by using three classical codes. However, there has been limited study on their error-correcting performance so far and whether this code construction can be generalized to higher dimension is an open question. In this paper, we first study the error-correcting performance of the 3D Chamon code, which is an instance of the 3D XYZ product of three repetition codes. Second, we show that the 3D XYZ product can be generalized to four dimensions and propose four-dimensional (4D) XYZ product code construction, which constructs a class of non-CSS quantum codes by using either four classical codes or two CSS quantum codes. Compared with the 4D homological product, we show that the 4D XYZ product can construct non-CSS codes with higher code dimension or code distance. Third, we consider two instances of the 4D XYZ product, which we refer to as the 4D Chamon code and the 4D XYZ product concatenated code, respectively. Our simulation results show that the 4D XYZ product can construct non-CSS codes with better error-correcting performance against Pauli-ZZZ-biased noise than CSS codes constructed by the 4D homological product. Finally, we present the geometric arrangement of the 4D Chamon code within a 4D cubic lattice, demonstrating that it possesses two key characteristics of fracton models, which strongly suggest that it is a novel 4D fracton model.
Three-dimensional (3D) quantum XYZ product can construct a class of non-CSS quantum codes by using three classical codes. However, there has been limited study on their error-correcting performance so far and whether this code construction can be generalized to higher dimension is an open question. In this paper, we first study the error-correcting performance of the 3D Chamon code, which is an instance of the 3D XYZ product of three repetition codes. Second, we show that the 3D XYZ product can be generalized to four dimension and propose four-dimensional (4D) XYZ product code construction, which constructs a class of non-CSS quantum codes by using either four classical codes or two CSS quantum codes. Compared with the 4D homological product, we show that the 4D XYZ product can construct non-CSS codes with higher code dimension or code distance. Third, we consider two instances of the 4D XYZ product, to which we refer as the 4D Chamon code and the 4D XYZ product concatenated code, respectively. Our simulation results show that, the 4D XYZ product can construct non-CSS codes with better error-correcting performance against Pauli-ZZZ-biased noise than CSS codes constructed by the 4D homological product. Finally, we present the geometric arrangement of the 4D Chamon code within a 4D cubic lattice, demonstrating that it possesses two key characteristics of fracton models, which strongly suggest that it is a novel 4D fracton model.
Product codes are an important class of quantum error-correcting codes constructed from multiple input codes, which can give rise to asymptotically good quantum low-density parity check codes. In previous work, we showed how the product between two codes can be physically implemented by coupling layers of the first code using checks of the second code. In this work, we further unify product code constructions with coupled-layer constructions of phases of matter by introducing coupled-layer codes. The essential strategy is to condense general excitations created by Pauli operators among multiple decoupled layers of the first code. The condensation is specified by an excitation algebra, which encodes the excitations, along with an algebra-preserving map. This coupling between layers generalizes the notion of gauging in physics as well as the mapping cone in homological algebra, and can be used to produce non-CSS codes. As examples, we show how coupled-layer codes reproduce the X-cube and Chamon models. We further generalize the balanced product code by allowing a unitary transformation in addition to a group action by free permutation and describe its corresponding coupled-layer construction. In particular, we show how balancing by a ZX-duality can reproduce non-CSS codes such as the fermionic toric code and the 3-fermion Walker-Wang model in 3D.
We study a three-fold variant of the hypergraph product code construction, differing from the standard homological product of three classical codes. When instantiated with 3 classical LDPC codes, this "XYZ product" yields a non CSS quantum LDPC code which might display a large minimum distance. The simplest instance of this construction, corresponding to the product of 3 repetition codes, is a non CSS variant of the 3-dimensional toric code known as the Chamon code. The general construction was introduced in Denise Maurice's PhD thesis, but has remained poorly understood so far. The reason is that while hypergraph product codes can be analyzed with combinatorial tools, the XYZ product codes also depend crucially on the algebraic properties of the parity-check matrices of the three classical codes, making their analysis much more involved.Our main motivation for studying XYZ product codes is that the natural representatives of logical operators are two-dimensional objects. This contrasts with standard hypergraph product codes in 3 dimensions which always admit one-dimensional logical operators. In particular, specific instances of XYZ product codes with constant rate might display a minimum distance as large as Θ(N2/3) . While we do not prove this result here, we obtain the dimension of a large class of XYZ product codes, and when restricting to codes with dimension 1, we reduce the problem of computing the minimum distance to a more elementary combinatorial problem involving binary 3-tensors. We also discuss in detail some families of XYZ product codes that can be embedded in three dimensions with local interaction. Some of these codes seem to share properties with Haah's cubic codes and might be interesting candidates for self-correcting quantum memories with a logarithmic energy barrier.
Fracton models have attracted considerable interest as candidates for quantum memories because of their unconventional ground-state degeneracy (GSD) and restricted-mobility excitations. The four-dimensional (4D) Chamon code introduced in our previous work is constructed via the 4D XYZ product of two two-dimensional (2D) toric codes. Its GSD grows exponentially with the system size, similar to that of the three-dimensional (3D) Chamon code, suggesting that it may be regarded as a 4D generalization of the 3D Chamon code. However, the excitation properties of the 4D Chamon code have not been studied in depth, and a high-performance decoding strategy is still lacking. In this work, we first establish the correspondence between the algebraic structure of the 4D Chamon code and the 4D lattice, thereby characterizing the geometric distributions of qubits and stabilizers. Second, we show that the 4D Chamon code supports three types of restricted-mobility excitations analogous to those of the 3D Chamon code, further supporting its interpretation as a 4D generalization of the 3D Chamon code. Finally, we uncover two structural properties relevant to decoding: a hyperplane symmetry and a projection-induced 2D toric-code structure. By exploiting these properties, we develop a two-layer decoding strategy that decomposes the original decoding problem into multiple independent and parallelizable subproblems. Numerical simulations show that the proposed decoder substantially outperforms BP-OSD in decoding accuracy, demonstrating the benefit of incorporating the intrinsic geometric and algebraic structures of the code into decoder design.
Stabilizer codes are often constructed within the Calderbank--Shor--Steane (CSS) framework, where two mutually orthogonal binary classical codes define XXX and ZZZ-type stabilizer generators. While this structure is algebraically convenient, additional non-CSS constraints may help suppress low-weight logical operators and improve decoding performance in the finite-length regime. We thus introduce quantum XYZ stabilizer codes, whose parity-check matrix (PCM) is built from three pairwise orthogonal binary PCMs associated with XXX-, YYY-, and ZZZ-type stabilizer generators. A nontrivial point is that an XYZ code instance is not automatically genuinely non-CSS: the same stabilizer group may admit a CSS generating set. We characterize this collapse, obtaining algebraic and rank conditions for deciding when the YYY-type checks are redundant and when they define genuinely non-CSS stabilizer constraints. We also derive upper and lower bounds on the quantum minimum distance, including bounds for mixed Pauli logical operators. The novel framework includes a known non-CSS topological code, namely the XYZ2^22 hexagonal code, and yields also sparse finite-length quantum low-density parity-check (qLDPC) constructions from intersecting-subset and quasi-dyadic code families. Simulations under depolarizing code-capacity noise and quaternary belief propagation decoding show that the proposed XYZ qLDPC instances can outperform representative CSS qLDPC instances with similar finite-length parameters.
Several notions of code products are known in quantum error correction, such as hypergraph products, homological products, lifted products, balanced products, to name a few. In this paper we introduce a new product code construction which is a natural generalization of classical product codes to quantum codes: starting from a set of component Calderbank-Shor-Steane (CSS) codes, a larger CSS code is obtained where both X parity checks and Z parity checks are associated to classical product codes. We deduce several properties of product CSS codes from the properties of the component codes, including bounds to the code distance, and show that built-in redundancies in the parity checks result in so-called meta-checks which can be exploited to correct syndrome read-out errors. We then specialize to the case of single-parity-check (SPC) product codes which in the classical domain are a common choice for constructing product codes. Logical error rate simulations of a SPC 3 -fold product CSS code having parameters [[512,174,8]] are shown under both a maximum likelihood decoder for the erasure channel and belief propagation decoding for depolarizing noise. We compare the results with other codes of comparable length and dimension, including a code from the family of asymptotically good Tanner codes. We observe that our reference product CSS code outperforms all the other examined codes.