Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Quantum-enhanced mid-infrared single-photon frequency up-conversion detection with loss and noise resilience

Xiaoying Wang, Yu Chen, Yujie Cai, Lin Cheng, Yihan Jia, Kun Huang, E Wu

Published Oct 10, 2025• 1 citation
Publisher

Abstract

Mid-infrared (MIR) detection remains challenging due to limited detector sensitivity and strong background noise. Frequency up-conversion enables MIR detection with visible-range detectors but suffers from limited robustness and additional noise generated in the nonlinear process. We demonstrate a quantum-enhanced MIR frequency up-conversion detection system that generates strongly non-degenerate, time-correlated photon pairs via spontaneous parametric down-conversion and detects MIR photons under severe loss and noise. With a 62 dB transmission loss and background noise 28 times higher than the detected signal, the quantum signal-to-noise ratio substantially surpasses that of classical photon counting. The system achieves stable signal retrieval under unpredictable noise fluctuations, highlighting its robustness in dynamically varying environments. These results establish a basis for practical sensing and imaging applications of quantum-enhanced MIR detection.

DOI
10.1364/ol.576123

Related papers

Mid-infrared single-photon upconversion spectroscopy based on temporal-spectral quantum correlation

Yujie Cai, Yu Chen, Xiaoning Xin +2 more

Promoting the sensitivity of mid-infrared (MIR) spectroscopy to the single-photon level is a critical need for investigating photosensitive biological samples and chemical reactions. MIR spectroscopy based on frequency upconversion is a compelling pioneer allowing high-efficiency MIR spectral measurement with well-developed single-photon detectors, which overcomes the main limitations of high thermal noise of current MIR detectors. However, noise from other nonlinear processes caused by strong pump fields hinders the development of the upconversion-based MIR spectroscopy to reach the single-photon level. Here, a broadband MIR single-photon frequency upconversion spectroscopy is demonstrated based on the temporal-spectral quantum correlation of non-degenerate photon pairs, which is well preserved in the frequency upconversion process and is fully used in extracting the signals from tremendous noise caused by the strong pump. A correlation spectrum broader than 660 nm is achieved and applied for the demonstration of sample identification under a low incident photon flux of 0.09 average photons per pulse. The system is featured with non-destructive and robust operation, which makes single-photon-level MIR spectroscopy an appealing option in biochemical applications.

Photonics Research•Sep 22, 2022•28 citations

High-sensitivity quantum sensing with pump-enhanced spontaneous parametric down-conversion

Chiara Lindner, Jachin Kunz, Simon J. Herr +3 more

Recent years have seen the development of quantum sensing concepts utilizing nonlinear interferometers based on correlated photon pairs generated by spontaneous parametric down-conversion (SPDC). Using SPDC far from frequency degeneracy allows a “division of labor” between the mid-infrared photon for the strongest sample interaction and the correlated near-infrared photon for low-noise detection. The small number of photons provided by SPDC and the resulting inferior signal-to-noise ratio are, however, a limiting factor preventing the wide applicability of the novel sensing concept. Here, we demonstrate a nonlinear interferometer based on pump-enhanced SPDC with strongly improved emission rates while maintaining broadband spontaneous emission. For validation of the concept, we demonstrate high-resolution mid-infrared spectroscopy with near-infrared detection, showcasing improved accuracy. Although the number of mid-infrared photons is about five orders of magnitude smaller than in classical spectrometers, the sensitivity of the quantum spectrometer becomes comparable, marking an essential step toward real-world applications.

arXiv:2208.07595•APL Photonics•May 1, 2023•22 citations

Mid-infrared single-photon upconversion spectroscopy enabled by nonlocal wavelength-to-time mapping

Yujie Cai, Yu Chen, Konstantin E. Dorfman +4 more

Ultrasensitive spectroscopy is an essential component in mid-infrared (MIR) technology. However, the drawbacks of MIR detectors pose challenges to robust MIR spectroscopy at the single-photon level. We propose an MIR single-photon frequency upconversion spectroscopy nonlocally mapping the MIR information to the time domain. Broadband MIR photons from spontaneous parametric downconversion are frequency-upconverted to the near-infrared band with quantum correlation preservation. Via the group delay of fiber, the MIR spectral information within a 1.18-micrometer bandwidth of 2.76 to 3.94 micrometers is then successfully projected to arrival times of correlated photon pairs. Under the conditions of 6.4 × 10 6 photons per second illumination, the transmission spectra of polymers with single-photon sensitivity are demonstrated using single-pixel detectors. The developed approach circumvents scanning and frequency selection instability, which stands out for its inherent compatibility for evolving environments and scalability for various wavelengths. Because of its high sensitivity and robustness, characterization of biochemical samples and weak measurement of quantum systems are possible to foresee.

Science Advances•Apr 19, 2024•37 citations

Quantum-correlated mid-infrared absorption spectroscopy with superconducting nanowire single-photon detectors

Xiaoqing Zheng, Hui Zhou, Ying Chen +5 more

Mid-infrared (MIR) spectroscopy serves as a powerful tool for molecular structure identification and chemical composition analysis. However, conventional Fourier-transform infrared spectrometers (FTIR) demonstrate compromised signal-to-noise ratios (SNR) under low-light conditions, which severely limit their performance in high-sensitivity applications. Although MIR superconducting nanowire single-photon detectors (SNSPDs) offer high detection efficiency and low timing jitter, their performance is hindered by background dark counts caused by room-temperature blackbody radiation. In this work, we present a quantum-correlated absorption spectroscopy platform that combines MIR-SNSPDs with entangled photon pairs to overcome these limitations. Leveraging the intrinsic temporal and spectral correlations of the photon pairs, coincidence detection effectively distinguishes signal photons from dominant thermal noise, achieving a remarkable improvement of two orders of magnitude in SNR under ultralow pump power conditions. The system achieves a spectral coverage of 3350-3540 nm with a resolution of 3.7 cm -1 at 3.4 µm, operating at an ultralow illumination photon flux of 4.4 × 10 6 photons/s. Validation experiments using polystyrene and polyethylene samples successfully detected CH 2 vibrational modes, demonstrating the platform’s capability for ultrasensitive biochemical analysis and material characterization. By integrating quantum correlation with MIR-SNSPDs, this work establishes a new paradigm for high-performance MIR spectroscopy in low-light scenarios.

Optics Express•Oct 22, 2025•3 citations

Mid-infrared coincidence measurements based on intracavity frequency conversion

Sara Piccione, Mattia Mancinelli, Alessandro Trenti +5 more

In the last years, the Mid Infrared (MIR) spectral region has attracted the attention of many areas of science and technology, opening the way to important applications, such as molecular imaging, remote sensing, free- space communication and environmental monitoring. However, the development of new sources of light, such as quantum cascade laser, was not followed by an adequate improvement in the MIR detection system, able to exceed the current challenges. Here we demonstrate the single-photon counting capability of a new detection system, based on efficient up-converter modules, by proving the correlated nature of twin photons pairs at about 3.1μm, opening the way to the extension of quantum optics experiments in the MIR.

Nonlinear Frequency Generation and Conversion: Materials and Devices•Feb 15, 2018•1 citation

Mid-infrared coincidence measurements on twin photons at room temperature

Mattia Mancinelli, Alessandro Trenti, Sara Piccione +5 more

Quantum measurements using single-photon detectors are opening interesting new perspectives in diverse fields such as remote sensing, quantum cryptography and quantum computing. A particularly demanding class of applications relies on the simultaneous detection of correlated single photons. In the visible and near infrared wavelength ranges suitable single-photon detectors do exist. However, low detector quantum efficiency or excessive noise has hampered their mid-infrared (MIR) counterpart. Fast and highly efficient single-photon detectors are thus highly sought after for MIR applications. Here we pave the way to quantum measurements in the MIR by the demonstration of a room temperature coincidence measurement with non-degenerate twin photons at about 3.1 μm. The experiment is based on the spectral translation of MIR radiation into the visible region, by means of efficient up-converter modules. The up-converted pairs are then detected with low-noise silicon avalanche photodiodes without the need for cryogenic cooling.

Nature Communications•May 15, 2017•88 citations
Mid-infrared (MIR) detection remains challenging due to limited detector sensitivity and strong background noise. Frequency up-conversion enables MIR detection with visible-range detectors but suffers from limited robustness and additional noise generated in the nonlinear process. We demonstrate a quantum-enhanced MIR frequency up-conversion detection system that generates strongly non-degenerate, time-correlated photon pairs via spontaneous parametric down-conversion and detects MIR photons under severe loss and noise. With a 62 dB transmission loss and background noise 28 times higher than the detected signal, the quantum signal-to-noise ratio substantially surpasses that of classical photon counting. The system achieves stable signal retrieval under unpredictable noise fluctuations, highlighting its robustness in dynamically varying environments. These results establish a basis for practical sensing and imaging applications of quantum-enhanced MIR detection.
Promoting the sensitivity of mid-infrared (MIR) spectroscopy to the single-photon level is a critical need for investigating photosensitive biological samples and chemical reactions. MIR spectroscopy based on frequency upconversion is a compelling pioneer allowing high-efficiency MIR spectral measurement with well-developed single-photon detectors, which overcomes the main limitations of high thermal noise of current MIR detectors. However, noise from other nonlinear processes caused by strong pump fields hinders the development of the upconversion-based MIR spectroscopy to reach the single-photon level. Here, a broadband MIR single-photon frequency upconversion spectroscopy is demonstrated based on the temporal-spectral quantum correlation of non-degenerate photon pairs, which is well preserved in the frequency upconversion process and is fully used in extracting the signals from tremendous noise caused by the strong pump. A correlation spectrum broader than 660 nm is achieved and applied for the demonstration of sample identification under a low incident photon flux of 0.09 average photons per pulse. The system is featured with non-destructive and robust operation, which makes single-photon-level MIR spectroscopy an appealing option in biochemical applications.
Recent years have seen the development of quantum sensing concepts utilizing nonlinear interferometers based on correlated photon pairs generated by spontaneous parametric down-conversion (SPDC). Using SPDC far from frequency degeneracy allows a “division of labor” between the mid-infrared photon for the strongest sample interaction and the correlated near-infrared photon for low-noise detection. The small number of photons provided by SPDC and the resulting inferior signal-to-noise ratio are, however, a limiting factor preventing the wide applicability of the novel sensing concept. Here, we demonstrate a nonlinear interferometer based on pump-enhanced SPDC with strongly improved emission rates while maintaining broadband spontaneous emission. For validation of the concept, we demonstrate high-resolution mid-infrared spectroscopy with near-infrared detection, showcasing improved accuracy. Although the number of mid-infrared photons is about five orders of magnitude smaller than in classical spectrometers, the sensitivity of the quantum spectrometer becomes comparable, marking an essential step toward real-world applications.
Ultrasensitive spectroscopy is an essential component in mid-infrared (MIR) technology. However, the drawbacks of MIR detectors pose challenges to robust MIR spectroscopy at the single-photon level. We propose an MIR single-photon frequency upconversion spectroscopy nonlocally mapping the MIR information to the time domain. Broadband MIR photons from spontaneous parametric downconversion are frequency-upconverted to the near-infrared band with quantum correlation preservation. Via the group delay of fiber, the MIR spectral information within a 1.18-micrometer bandwidth of 2.76 to 3.94 micrometers is then successfully projected to arrival times of correlated photon pairs. Under the conditions of 6.4 × 10 6 photons per second illumination, the transmission spectra of polymers with single-photon sensitivity are demonstrated using single-pixel detectors. The developed approach circumvents scanning and frequency selection instability, which stands out for its inherent compatibility for evolving environments and scalability for various wavelengths. Because of its high sensitivity and robustness, characterization of biochemical samples and weak measurement of quantum systems are possible to foresee.
Mid-infrared (MIR) spectroscopy serves as a powerful tool for molecular structure identification and chemical composition analysis. However, conventional Fourier-transform infrared spectrometers (FTIR) demonstrate compromised signal-to-noise ratios (SNR) under low-light conditions, which severely limit their performance in high-sensitivity applications. Although MIR superconducting nanowire single-photon detectors (SNSPDs) offer high detection efficiency and low timing jitter, their performance is hindered by background dark counts caused by room-temperature blackbody radiation. In this work, we present a quantum-correlated absorption spectroscopy platform that combines MIR-SNSPDs with entangled photon pairs to overcome these limitations. Leveraging the intrinsic temporal and spectral correlations of the photon pairs, coincidence detection effectively distinguishes signal photons from dominant thermal noise, achieving a remarkable improvement of two orders of magnitude in SNR under ultralow pump power conditions. The system achieves a spectral coverage of 3350-3540 nm with a resolution of 3.7 cm -1 at 3.4 µm, operating at an ultralow illumination photon flux of 4.4 × 10 6 photons/s. Validation experiments using polystyrene and polyethylene samples successfully detected CH 2 vibrational modes, demonstrating the platform’s capability for ultrasensitive biochemical analysis and material characterization. By integrating quantum correlation with MIR-SNSPDs, this work establishes a new paradigm for high-performance MIR spectroscopy in low-light scenarios.
In the last years, the Mid Infrared (MIR) spectral region has attracted the attention of many areas of science and technology, opening the way to important applications, such as molecular imaging, remote sensing, free- space communication and environmental monitoring. However, the development of new sources of light, such as quantum cascade laser, was not followed by an adequate improvement in the MIR detection system, able to exceed the current challenges. Here we demonstrate the single-photon counting capability of a new detection system, based on efficient up-converter modules, by proving the correlated nature of twin photons pairs at about 3.1μm, opening the way to the extension of quantum optics experiments in the MIR.
Quantum measurements using single-photon detectors are opening interesting new perspectives in diverse fields such as remote sensing, quantum cryptography and quantum computing. A particularly demanding class of applications relies on the simultaneous detection of correlated single photons. In the visible and near infrared wavelength ranges suitable single-photon detectors do exist. However, low detector quantum efficiency or excessive noise has hampered their mid-infrared (MIR) counterpart. Fast and highly efficient single-photon detectors are thus highly sought after for MIR applications. Here we pave the way to quantum measurements in the MIR by the demonstration of a room temperature coincidence measurement with non-degenerate twin photons at about 3.1 μm. The experiment is based on the spectral translation of MIR radiation into the visible region, by means of efficient up-converter modules. The up-converted pairs are then detected with low-noise silicon avalanche photodiodes without the need for cryogenic cooling.