Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE VTS Asia Pacific Wireless Communications Symposium (APWCS)

Analysis of two dimensional measurement-free surface code under idling patch

Gunsik Min, Jun Heo

Published Aug 20, 2025• 0 citations
Publisher

Abstract

Quantum error correction codes typically rely on syndrome measurements to detect and correct errors. However, measurements require significantly longer time than quantum gate operations, posing a threat to coherence time and consequently leading to higher error rates. In this paper, we address this challenge by implementing and analyzing a measurement-free error correction scheme for the surface code, one of the leading quantum error correction codes.

DOI
10.1109/apwcs67981.2025.11151932

Related papers

Measurement-free implementations of small-scale surface codes for quantum-dot qubits

Hamdi Ercan, Joydip Ghosh, Daniel Crow +4 more

The performance of quantum-error-correction schemes depends sensitively on the physical realizations of the qubits and the implementations of various operations. For example, in quantum-dot spin qubits, readout is typically much slower than gate operations, and conventional surface-code implementations that rely heavily on syndrome measurements could therefore be challenging. However, fast and accurate reset of quantum-dot qubits, without readout, can be achieved via tunneling to a reservoir. Here we propose small-scale surface-code implementations for which syndrome measurements are replaced by a combination of Toffoli gates and qubit reset. For quantum-dot qubits, this enables much faster error correction than measurement-based schemes, but requires additional ancilla qubits and non-nearest-neighbor interactions. We have performed numerical simulations of two different coding schemes, obtaining error thresholds on the orders of ${10}^{\ensuremath{-}2}$ for a one-dimensional architecture that only corrects bit-flip errors and ${10}^{\ensuremath{-}4}$ for a two-dimensional architecture that corrects bit- and phase-flip errors.

arXiv:1708.08683•Physical Review A•Jan 16, 2018•14 citations

Information-efficient decoding of surface codes

Long D. H. My, Shao-Hen Chiew, Jing Hao Chai +1 more

Surface codes are a popular error-correction route to fault-tolerant quantum computation. The so-called exponential backlog problem that can arise when one has to do logical $T$-gates within the surface code demands real-time decoding of the syndrome information to diagnose the appropriate Pauli frame in which to do the gate. This in turn puts a minimum requirement on the communication rate between the quantum processing unit, where the syndrome information is collected, and the classical processor, where the decoding algorithm is run. This minimum communication rate can be difficult to achieve while preserving the quality of the quantum processor. Here, we present two decoders that make use of a reduced syndrome information volume, relying on a number of syndrome bits that scale only as the width -- and not the usual area -- of the surface-code patch. This eases the communication requirements necessary for real-time decoding.

quant-pharXiv:2512.14255•Dec 17, 2025•0 citations

Method for 3D structure of measurement-free fault tolerant surface code

Gunsik Min, Jun Heo

Abstract Quantum error correction (QEC) is essential for mitigating decoherence in quantum computations, but many QEC schemes rely heavily on mid-circuit measurements, which introduce significant noise due to their high error rates in current hardware. To overcome this limitation, we propose a measurement-free QEC scheme based on the surface code, leveraging its topological robustness while eliminating the need for physical measurements during error correction. Our key innovation is a three-dimensional patch-based architecture that interlinks three logical qubit patches, enabling coherent error extraction and feedback without measurements. By transforming syndrome information into geometric correlations across patches, our design inherently suppresses measurement-induced errors while preserving the surface code’s fault-tolerant thresholds. We analyze the scheme’s performance under realistic noise models and demonstrate its advantages over traditional flag-based or Steane-type QEC in regimes where measurements dominate error rate. This work bridges the gap between measurement-free QEC and scalable surface code architectures, offering a path toward fault-tolerant quantum computing in systems where fast, high-fidelity measurements remain impractical.

•Sep 25, 2025•0 citations

Demonstration of dynamic surface codes

Alec Eickbusch, Matt McEwen, Volodymyr Sivak +97 more

A remarkable characteristic of quantum computing is the potential for reliable computation despite faulty qubits. This can be achieved through quantum error correction, which is typically implemented by repeatedly applying static syndrome checks, permitting correction of logical information. Recently, the development of time-dynamic approaches to error correction has enabled different codes and implementations that do not rely on static syndrome measurements. Here we experimentally demonstrate three time-dynamic implementations of the surface code, each offering a distinct solution to hardware design challenges faced by surface code realizations. First, we embed the surface code on a hexagonal lattice, reducing the necessary couplings per qubit from four to three. Second, we walk a surface code, swapping the role of data and measure qubits each round, achieving error correction with built-in removal of accumulated non-computational errors. Finally, we realize the surface code using iSWAP gates instead of the traditional CNOT, extending the set of viable gates for error correction without additional overhead. We measure the error suppression factor when scaling from distance-3 to distance-5 codes of Λ35,hex = 2.15(2), Λ35,walk = 1.69(6) and Λ35,iSWAP = 1.56(2), achieving state-of-the-art error suppression for each. Our work demonstrates that dynamic circuit approaches meet the demands for fault tolerance and enable alternative strategies for scalable hardware design. Typical quantum error correcting codes assign fixed roles to the underlying physical qubits. Now the performance benefits of alternative, dynamic error correction schemes have been demonstrated on a superconducting quantum processor.

Nature Physics•Oct 17, 2025•24 citations

3D Stacked Surface-Code Architecture for Measurement-Free Fault-Tolerant Quantum Error Correction

GunSik Min, IlKwon Sohn, Jun Heo

Mid-circuit measurements are a major bottleneck for superconducting quantum processors because they are slower and noisier than gates. Measurement-free quantum error correction (mfec) replaces repeated measurements and classical feed-forward by coherent quantum feedback, but existing mfec protocols suffer from severe connectivity overhead when mapped to planar surface-code architectures: transversal interactions between logical patches require SWAP chains of length $O(d)$ in the code distance, which increase depth and generate hook errors. This work introduces a 3D stacked surface-code architecture for measurement-free fault-tolerant quantum error correction that removes this connectivity bottleneck. Vertical transversal couplers between aligned surface-code patches enable coherent parity mapping and feedback with zero SWAP overhead, realizing constant-depth $O(1)$ inter-layer operations in d while preserving local 2D stabilizer checks. A fault-tolerant mfec protocol for the surface code is constructed that suppresses hook errors under realistic noise. An analytical performance model shows that the 3D architecture overcomes the readout error floor and achieves logical error rates orders of magnitude below both standard measurement-based surface codes and 2D mfec variants in regimes with slow, noisy measurements, identifying 3D integration as a key enabler for scalable measurement-free fault tolerance.

quant-pharXiv:2601.13648•Jan 21, 2026•0 citations

Surface code quantum error correction incorporating accurate error propagation

Austin G. Fowler, David S. Wang, Lloyd C. L. Hollenberg

The surface code is a powerful quantum error correcting code that can be defined on a 2-D square lattice of qubits with only nearest neighbor interactions. Syndrome and data qubits form a checkerboard pattern. Information about errors is obtained by repeatedly measuring each syndrome qubit after appropriate interaction with its four nearest neighbor data qubits. Changes in the measurement value indicate the presence of chains of errors in space and time. The standard method of determining operations likely to return the code to its error-free state is to use the minimum weight matching algorithm to connect pairs of measurement changes with chains of corrections such that the minimum total number of corrections is used. Prior work has not taken into account the propagation of errors in space and time by the two-qubit interactions. We show that taking this into account leads to a quadratic improvement of the logical error rate.

Quantum Information and Computation•Jan 1, 2011•22 citations
Quantum error correction codes typically rely on syndrome measurements to detect and correct errors. However, measurements require significantly longer time than quantum gate operations, posing a threat to coherence time and consequently leading to higher error rates. In this paper, we address this challenge by implementing and analyzing a measurement-free error correction scheme for the surface code, one of the leading quantum error correction codes.
The performance of quantum-error-correction schemes depends sensitively on the physical realizations of the qubits and the implementations of various operations. For example, in quantum-dot spin qubits, readout is typically much slower than gate operations, and conventional surface-code implementations that rely heavily on syndrome measurements could therefore be challenging. However, fast and accurate reset of quantum-dot qubits, without readout, can be achieved via tunneling to a reservoir. Here we propose small-scale surface-code implementations for which syndrome measurements are replaced by a combination of Toffoli gates and qubit reset. For quantum-dot qubits, this enables much faster error correction than measurement-based schemes, but requires additional ancilla qubits and non-nearest-neighbor interactions. We have performed numerical simulations of two different coding schemes, obtaining error thresholds on the orders of ${10}^{\ensuremath{-}2}$ for a one-dimensional architecture that only corrects bit-flip errors and ${10}^{\ensuremath{-}4}$ for a two-dimensional architecture that corrects bit- and phase-flip errors.
Surface codes are a popular error-correction route to fault-tolerant quantum computation. The so-called exponential backlog problem that can arise when one has to do logical TTT-gates within the surface code demands real-time decoding of the syndrome information to diagnose the appropriate Pauli frame in which to do the gate. This in turn puts a minimum requirement on the communication rate between the quantum processing unit, where the syndrome information is collected, and the classical processor, where the decoding algorithm is run. This minimum communication rate can be difficult to achieve while preserving the quality of the quantum processor. Here, we present two decoders that make use of a reduced syndrome information volume, relying on a number of syndrome bits that scale only as the width -- and not the usual area -- of the surface-code patch. This eases the communication requirements necessary for real-time decoding.
Abstract Quantum error correction (QEC) is essential for mitigating decoherence in quantum computations, but many QEC schemes rely heavily on mid-circuit measurements, which introduce significant noise due to their high error rates in current hardware. To overcome this limitation, we propose a measurement-free QEC scheme based on the surface code, leveraging its topological robustness while eliminating the need for physical measurements during error correction. Our key innovation is a three-dimensional patch-based architecture that interlinks three logical qubit patches, enabling coherent error extraction and feedback without measurements. By transforming syndrome information into geometric correlations across patches, our design inherently suppresses measurement-induced errors while preserving the surface code’s fault-tolerant thresholds. We analyze the scheme’s performance under realistic noise models and demonstrate its advantages over traditional flag-based or Steane-type QEC in regimes where measurements dominate error rate. This work bridges the gap between measurement-free QEC and scalable surface code architectures, offering a path toward fault-tolerant quantum computing in systems where fast, high-fidelity measurements remain impractical.
A remarkable characteristic of quantum computing is the potential for reliable computation despite faulty qubits. This can be achieved through quantum error correction, which is typically implemented by repeatedly applying static syndrome checks, permitting correction of logical information. Recently, the development of time-dynamic approaches to error correction has enabled different codes and implementations that do not rely on static syndrome measurements. Here we experimentally demonstrate three time-dynamic implementations of the surface code, each offering a distinct solution to hardware design challenges faced by surface code realizations. First, we embed the surface code on a hexagonal lattice, reducing the necessary couplings per qubit from four to three. Second, we walk a surface code, swapping the role of data and measure qubits each round, achieving error correction with built-in removal of accumulated non-computational errors. Finally, we realize the surface code using iSWAP gates instead of the traditional CNOT, extending the set of viable gates for error correction without additional overhead. We measure the error suppression factor when scaling from distance-3 to distance-5 codes of Λ35,hex = 2.15(2), Λ35,walk = 1.69(6) and Λ35,iSWAP = 1.56(2), achieving state-of-the-art error suppression for each. Our work demonstrates that dynamic circuit approaches meet the demands for fault tolerance and enable alternative strategies for scalable hardware design. Typical quantum error correcting codes assign fixed roles to the underlying physical qubits. Now the performance benefits of alternative, dynamic error correction schemes have been demonstrated on a superconducting quantum processor.
Mid-circuit measurements are a major bottleneck for superconducting quantum processors because they are slower and noisier than gates. Measurement-free quantum error correction (mfec) replaces repeated measurements and classical feed-forward by coherent quantum feedback, but existing mfec protocols suffer from severe connectivity overhead when mapped to planar surface-code architectures: transversal interactions between logical patches require SWAP chains of length O(d)O(d)O(d) in the code distance, which increase depth and generate hook errors. This work introduces a 3D stacked surface-code architecture for measurement-free fault-tolerant quantum error correction that removes this connectivity bottleneck. Vertical transversal couplers between aligned surface-code patches enable coherent parity mapping and feedback with zero SWAP overhead, realizing constant-depth O(1)O(1)O(1) inter-layer operations in d while preserving local 2D stabilizer checks. A fault-tolerant mfec protocol for the surface code is constructed that suppresses hook errors under realistic noise. An analytical performance model shows that the 3D architecture overcomes the readout error floor and achieves logical error rates orders of magnitude below both standard measurement-based surface codes and 2D mfec variants in regimes with slow, noisy measurements, identifying 3D integration as a key enabler for scalable measurement-free fault tolerance.
The surface code is a powerful quantum error correcting code that can be defined on a 2-D square lattice of qubits with only nearest neighbor interactions. Syndrome and data qubits form a checkerboard pattern. Information about errors is obtained by repeatedly measuring each syndrome qubit after appropriate interaction with its four nearest neighbor data qubits. Changes in the measurement value indicate the presence of chains of errors in space and time. The standard method of determining operations likely to return the code to its error-free state is to use the minimum weight matching algorithm to connect pairs of measurement changes with chains of corrections such that the minimum total number of corrections is used. Prior work has not taken into account the propagation of errors in space and time by the two-qubit interactions. We show that taking this into account leads to a quadratic improvement of the logical error rate.