Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International journal of intelligent engineering and systems

Hybrid Optimization Framework for Enhancing LDPC Base Graph Performance in 6G Networks: Integrating Machine Learning and Genetic Algorithms

Published Jul 18, 2025• 0 citations
Publisher

Abstract

This study presents a novel hybrid framework designed to enhance Low-Density Parity-Check (LDPC) code performance for 6G networks by integrating multi-stage optimization and adaptive neural decoding.First, density evolution simulations quantify bit error rate (BER) and frame error rate (FER) across Additive White Gaussian Noise (AWGN), Binary Symmetric Channel (BSC), and Rayleigh flat-fading channel.Second, a genetic algorithm (GA), guided by a LightGBM (ML) predictor, tunes Base Graph (BG) shift values to reduce error rates and short cycles in the parity check matrix.Third, a custom Neural Min-Sum decoder incorporates learnable weights and syndrome-aware loss, leveraging uncorrected frame samples to expedite convergence and achieve ultra-low error floors.The simulation results indicate that the optimized design improved LDPC BGs by up to 44% for the AWGN channel, 94% for the BSC, and 61.3% for the Rayleigh channel, leading to enhanced BER performance compared to the original designs.Additionally, the computation time is reduced by approximately 85%, and the number of short cycles (4-cycles) is decreased by about 34% using QPSK modulation.

DOI
10.22266/ijies2025.0831.52

Related papers

Learning About Syndrome Awareness and WMS Algorithm for Adaptive Neural Decoding for 6G LDPC Base Graph Enhancement

Noor Salih Mohammed, Ahmed Ghanim Wadday, Bashar Jabbar Hamza

6G wireless communication networks require low-latency, ultra-reliable error correction capabilities that adapt to dynamic channel scenarios and block lengths. This study presents a new adaptive neural decoding workflow for 5G-New Radio LDPC base graphs (BG1 and BG2). It combines a weighted Min-Sum (WMS) algorithm with syndrome-aware learning that uses parity-check feedback to guide neural decoding in two key ways: syndrome-based loss and syndrome-conditioned message updates. This approach overcomes the limitations of traditional min-sum (MS) and belief propagation (BP) decoders. To improve message updates among iterations based on real-time parity-check feedback, we first introduce trainable parameters for better training on the most challenging error patterns; a unique data pipeline collects "uncorrected" frame samples at low SNR and generates log-likelihood ratios (LLRs) under the Additive White Gaussian Noise (AWGN) channel and Rayleigh flat-fading channel. The training scheme has two stages: (1) an end-to-end supervised stage focused on minimizing both soft-BER and soft-FER loss across random noisy codewords, and (2) a boosting stage for learning residual corrections using mean-squared error on uncorrected frames. Performance is evaluated across various SNR levels, lifting factors, and code rates. Results show that BG1 outperforms BG2 in the AWGN channel by 1 dB and in the Rayleigh flat-fading channel by 2 dB. To balance reliability and decoding complexity, early convergence is achieved within 10 to 20 iterations. Additionally, lower rates and higher lifting factors produce sharper waterfalls and error floors below 10−7 and 10−8 for AWGN and Rayleigh, respectively. The proposed framework generalizes to different channel types and LDPC designs and offers a 0.3 dB waterfall gain compared to traditional neural Min–Sum decoders. These results demonstrate adaptable, high-performance error correction suitable for various wireless applications, highlighting the practicality of syndrome-aware WMS neural decoding for future 6G standards.

The Eurasia Proceedings of Science Technology Engineering and Mathematics•Nov 30, 2025•0 citations

Optimizing LDPC Decoding with Machine Learning Using Learnable Weights: A Hybrid Framework Integrating Neural Networks with Iterative Message-Passing for Enhanced Error-Correction in 5G Systems

Niklas Savijoki

This thesis investigates the optimization of Low-Density Parity-Check (LDPC) decoding through machine learning techniques, with a specific focus on 5G communication systems. Traditional LDPC decoding algorithms face a critical trade-off: Belief Propagation (BP) offers excellent error-correction performance but with high computational complexity, while Min-Sum (MS) reduces complexity at the cost of degraded performance. To address this limitation, a hybrid neural network architecture is proposed that incorporates learnable normalization and offset weights into the message-passing framework of LDPC decoders. This approach integrates multiplicative (normalization) and additive (offset) weights into the Tanner graph structure, allowing the decoder to adapt to specific channel conditions. A novel weighted binary cross-entropy loss function is developed that prioritizes entire block recovery by assigning different importance to information and parity bits during training. Experimental results demonstrate that ML-assisted decoder consistently outperforms conventional Min-Sum decoding, approaching the error-correction capability of Belief Propagation while maintaining comparable computational efficiency to Min-Sum. Comprehensive evaluations across different weight configurations (scalar and vector-based) reveal that increased parametrization generally improves decoding performance. Analysis of the impact of iteration counts shows that the optimal number of decoding iterations varies between different code configurations with studied Basegraph 1 case requiring 15 iterations for optimal performance while studied Basegraph 2 case benefits significantly from 20 iterations. The proposed ML-assisted LDPC decoder represents a significant advancement for 5G systems, offering improved error correction at lower signal strengths while balancing latency and computational requirements. This research contributes to the ongoing evolution of wireless technology by demonstrating how machine learning can effectively enhance traditional decoding algorithms, providing a practical pathway toward more efficient and adaptive error correction in modern communication systems.

•Jan 1, 2025•0 citations

Optimized decoder for low-density parity check codes based on genetic algorithms

Hajar El Ouakili, Mohammed El Ghzaoui, Rachid El Alami

Low-density parity check (LDPC) codes, are a family of error-correcting codes, their performances close to the Shannon limit make them very attractive solutions for digital communication systems. There are several algorithms for decoding LDPC codes that show great diversity in terms of performance related to error correction. Also, very recently, many research papers involved the genetic algorithm (GA) in coding theory, in particular, in the decoding linear block codes case, which has heavily contributed to reducing the bit error rate (BER). In this paper, an efficient method based on the GA is proposed and it is used to improve the power of correction in terms of BER and the frame error rate (FER) of LDPC codes. Subsequently, the proposed algorithm can independently decide the most suitable moment to stop the decoding process, moreover, it does not require channel information (CSI) making it adaptable for all types of channels with different noise or intensity. The simulations show that the proposed algorithm is more efficient in terms of BER compared to other LDPC code decoders.

International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering•Apr 4, 2024•0 citations

Boosted Neural Decoders: Achieving Extreme Reliability of LDPC Codes for 6G Networks

Hee-Youl Kwak, Dae-Young Yun, Yongjune Kim +2 more

Ensuring extremely high reliability in channel coding is essential for 6G networks. The next-generation of ultra-reliable and low-latency communications (xURLLC) scenario within 6G networks requires frame error rate (FER) below 10-9. However, low-density parity-check (LDPC) codes, the standard in 5G new radio (NR), encounter a challenge known as the error floor phenomenon, which hinders to achieve such low frame error rates. To tackle this problem, we introduce an innovative solution: boosted neural min-sum (NMS) decoder. This decoder operates identically to conventional NMS decoders, but is trained by novel training methods including: i) boosting learning with uncorrected vectors, ii) block-wise training schedule to address the vanishing gradient issue, iii) dynamic weight sharing to minimize the number of trainable weights, iv) transfer learning to reduce the required sample count, and v) data augmentation to expedite the sampling process. Leveraging these training strategies, the boosted NMS decoder achieves the state-of-the art performance in reducing the error floor as well as superior waterfall performance. Remarkably, we fulfill the 6G xURLLC requirement for 5G LDPC codes without a severe error floor. Additionally, the boosted NMS decoder, once its weights are trained, can perform decoding without additional modules, making it highly practical for immediate application. The source code is available athttps://github.com/ghy1228/LDPC_Error_Floor.

arXiv:2405.13413•IEEE Journal on Selected Areas in Communications•Jan 20, 2025•18 citations

A Deep Learning based Multi-edge-type decoding algorithm for 5G NR LDPC codes

Tianyu Du, Hao Ju, Yin Xu +2 more

Low-density parity-check(LDPC) code has been selected as the channel coding method by 5G NR because of its excellent error-correcting performance. To further improve the performance of LDPC decoding, this paper proposes a neural normalized min-sum(NNMS) algorithm based on multi-edge-type(MET). Based on the LLR convergence analysis of the protograph matrix of 5G NR, the base matrix is divided into several independent regions. Each part is assigned a unique scaling factor at different iterations. To verify the effectiveness of the proposed algorithm, We use two parity-check matrixes(PCM) derived from different base graphs in simulations. The results show that the proposed algorithm performs at most 0.45dB better than BP, 0.37dB better than NMS, and 0.25dB better than OMS, respectively, when the frame error rate (FER) is at 1$0^{-5}$ level over additive white Gaussian noise (AWGN) channels using BPSK modulation.

International Wireless Communications and Mobile Computing Conference (IWCMC)•Jun 19, 2023•8 citations

Performance Enhancement of Low-Density Parity-Check Decoder Using Neural Network Optimized Parameters

Amany Sabah Hassan, Mohammed Abdullah Hussein ElSheikh

Low-density parity-check (LDPC) codes are of prime importance in achieving near-Shannon capacity in current communication systems. However, the optimal decoding process for LDPC codes is computationally intensive. This paper presents a neural normalized min-sum (NNMS) decoding network that improves error correction capabilities with minimal computational overhead. A weight-sharing approach is adopted in the NNMS model, in which the correction factors (α, β) are shared across nodes within a single layer. This approach decreases the total number of parameters in the model compared to traditional neural decoders, making it easier for hardware implementation. The NNMS model is tested using a (576, 432) LDPC code for an additive white Gaussian noise channel with binary phase shift keying modulation. Simulation results show that the NNMS model outperforms traditional normalized min-sum (NMS) decoders. At a signal-to-noise ratio of 5 dB, the NNMS model has a bit-error rate (BER) of 1.0 × 10−7, whereas traditional NMS models have a less steep slope. In particular, the NNMS model has a coding gain of 1.25 dB compared to the traditional NMS model at a BER threshold of 1.0 × 10−3. This shows that the NNMS model is an efficient solution for high-performance, real-time digital communication systems.

UHD Journal of Science and Technology•Jul 5, 2026•0 citations
This study presents a novel hybrid framework designed to enhance Low-Density Parity-Check (LDPC) code performance for 6G networks by integrating multi-stage optimization and adaptive neural decoding.First, density evolution simulations quantify bit error rate (BER) and frame error rate (FER) across Additive White Gaussian Noise (AWGN), Binary Symmetric Channel (BSC), and Rayleigh flat-fading channel.Second, a genetic algorithm (GA), guided by a LightGBM (ML) predictor, tunes Base Graph (BG) shift values to reduce error rates and short cycles in the parity check matrix.Third, a custom Neural Min-Sum decoder incorporates learnable weights and syndrome-aware loss, leveraging uncorrected frame samples to expedite convergence and achieve ultra-low error floors.The simulation results indicate that the optimized design improved LDPC BGs by up to 44% for the AWGN channel, 94% for the BSC, and 61.3% for the Rayleigh channel, leading to enhanced BER performance compared to the original designs.Additionally, the computation time is reduced by approximately 85%, and the number of short cycles (4-cycles) is decreased by about 34% using QPSK modulation.
6G wireless communication networks require low-latency, ultra-reliable error correction capabilities that adapt to dynamic channel scenarios and block lengths. This study presents a new adaptive neural decoding workflow for 5G-New Radio LDPC base graphs (BG1 and BG2). It combines a weighted Min-Sum (WMS) algorithm with syndrome-aware learning that uses parity-check feedback to guide neural decoding in two key ways: syndrome-based loss and syndrome-conditioned message updates. This approach overcomes the limitations of traditional min-sum (MS) and belief propagation (BP) decoders. To improve message updates among iterations based on real-time parity-check feedback, we first introduce trainable parameters for better training on the most challenging error patterns; a unique data pipeline collects "uncorrected" frame samples at low SNR and generates log-likelihood ratios (LLRs) under the Additive White Gaussian Noise (AWGN) channel and Rayleigh flat-fading channel. The training scheme has two stages: (1) an end-to-end supervised stage focused on minimizing both soft-BER and soft-FER loss across random noisy codewords, and (2) a boosting stage for learning residual corrections using mean-squared error on uncorrected frames. Performance is evaluated across various SNR levels, lifting factors, and code rates. Results show that BG1 outperforms BG2 in the AWGN channel by 1 dB and in the Rayleigh flat-fading channel by 2 dB. To balance reliability and decoding complexity, early convergence is achieved within 10 to 20 iterations. Additionally, lower rates and higher lifting factors produce sharper waterfalls and error floors below 10−7 and 10−8 for AWGN and Rayleigh, respectively. The proposed framework generalizes to different channel types and LDPC designs and offers a 0.3 dB waterfall gain compared to traditional neural Min–Sum decoders. These results demonstrate adaptable, high-performance error correction suitable for various wireless applications, highlighting the practicality of syndrome-aware WMS neural decoding for future 6G standards.
This thesis investigates the optimization of Low-Density Parity-Check (LDPC) decoding through machine learning techniques, with a specific focus on 5G communication systems. Traditional LDPC decoding algorithms face a critical trade-off: Belief Propagation (BP) offers excellent error-correction performance but with high computational complexity, while Min-Sum (MS) reduces complexity at the cost of degraded performance. To address this limitation, a hybrid neural network architecture is proposed that incorporates learnable normalization and offset weights into the message-passing framework of LDPC decoders. This approach integrates multiplicative (normalization) and additive (offset) weights into the Tanner graph structure, allowing the decoder to adapt to specific channel conditions. A novel weighted binary cross-entropy loss function is developed that prioritizes entire block recovery by assigning different importance to information and parity bits during training. Experimental results demonstrate that ML-assisted decoder consistently outperforms conventional Min-Sum decoding, approaching the error-correction capability of Belief Propagation while maintaining comparable computational efficiency to Min-Sum. Comprehensive evaluations across different weight configurations (scalar and vector-based) reveal that increased parametrization generally improves decoding performance. Analysis of the impact of iteration counts shows that the optimal number of decoding iterations varies between different code configurations with studied Basegraph 1 case requiring 15 iterations for optimal performance while studied Basegraph 2 case benefits significantly from 20 iterations. The proposed ML-assisted LDPC decoder represents a significant advancement for 5G systems, offering improved error correction at lower signal strengths while balancing latency and computational requirements. This research contributes to the ongoing evolution of wireless technology by demonstrating how machine learning can effectively enhance traditional decoding algorithms, providing a practical pathway toward more efficient and adaptive error correction in modern communication systems.
Low-density parity check (LDPC) codes, are a family of error-correcting codes, their performances close to the Shannon limit make them very attractive solutions for digital communication systems. There are several algorithms for decoding LDPC codes that show great diversity in terms of performance related to error correction. Also, very recently, many research papers involved the genetic algorithm (GA) in coding theory, in particular, in the decoding linear block codes case, which has heavily contributed to reducing the bit error rate (BER). In this paper, an efficient method based on the GA is proposed and it is used to improve the power of correction in terms of BER and the frame error rate (FER) of LDPC codes. Subsequently, the proposed algorithm can independently decide the most suitable moment to stop the decoding process, moreover, it does not require channel information (CSI) making it adaptable for all types of channels with different noise or intensity. The simulations show that the proposed algorithm is more efficient in terms of BER compared to other LDPC code decoders.
Ensuring extremely high reliability in channel coding is essential for 6G networks. The next-generation of ultra-reliable and low-latency communications (xURLLC) scenario within 6G networks requires frame error rate (FER) below 10-9. However, low-density parity-check (LDPC) codes, the standard in 5G new radio (NR), encounter a challenge known as the error floor phenomenon, which hinders to achieve such low frame error rates. To tackle this problem, we introduce an innovative solution: boosted neural min-sum (NMS) decoder. This decoder operates identically to conventional NMS decoders, but is trained by novel training methods including: i) boosting learning with uncorrected vectors, ii) block-wise training schedule to address the vanishing gradient issue, iii) dynamic weight sharing to minimize the number of trainable weights, iv) transfer learning to reduce the required sample count, and v) data augmentation to expedite the sampling process. Leveraging these training strategies, the boosted NMS decoder achieves the state-of-the art performance in reducing the error floor as well as superior waterfall performance. Remarkably, we fulfill the 6G xURLLC requirement for 5G LDPC codes without a severe error floor. Additionally, the boosted NMS decoder, once its weights are trained, can perform decoding without additional modules, making it highly practical for immediate application. The source code is available athttps://github.com/ghy1228/LDPC_Error_Floor.
Low-density parity-check(LDPC) code has been selected as the channel coding method by 5G NR because of its excellent error-correcting performance. To further improve the performance of LDPC decoding, this paper proposes a neural normalized min-sum(NNMS) algorithm based on multi-edge-type(MET). Based on the LLR convergence analysis of the protograph matrix of 5G NR, the base matrix is divided into several independent regions. Each part is assigned a unique scaling factor at different iterations. To verify the effectiveness of the proposed algorithm, We use two parity-check matrixes(PCM) derived from different base graphs in simulations. The results show that the proposed algorithm performs at most 0.45dB better than BP, 0.37dB better than NMS, and 0.25dB better than OMS, respectively, when the frame error rate (FER) is at 10−50^{-5}0−5 level over additive white Gaussian noise (AWGN) channels using BPSK modulation.
Low-density parity-check (LDPC) codes are of prime importance in achieving near-Shannon capacity in current communication systems. However, the optimal decoding process for LDPC codes is computationally intensive. This paper presents a neural normalized min-sum (NNMS) decoding network that improves error correction capabilities with minimal computational overhead. A weight-sharing approach is adopted in the NNMS model, in which the correction factors (α, β) are shared across nodes within a single layer. This approach decreases the total number of parameters in the model compared to traditional neural decoders, making it easier for hardware implementation. The NNMS model is tested using a (576, 432) LDPC code for an additive white Gaussian noise channel with binary phase shift keying modulation. Simulation results show that the NNMS model outperforms traditional normalized min-sum (NMS) decoders. At a signal-to-noise ratio of 5 dB, the NNMS model has a bit-error rate (BER) of 1.0 × 10−7, whereas traditional NMS models have a less steep slope. In particular, the NNMS model has a coding gain of 1.25 dB compared to the traditional NMS model at a BER threshold of 1.0 × 10−3. This shows that the NNMS model is an efficient solution for high-performance, real-time digital communication systems.