As a typical nonlinear device, Josephson junction (JJ) can be either served as a microwave device to scatter the traveling microwave or embedded in a transmission line (TL) resonator to modify the mode structure. However, two mutually exclusive circuit models have been proposed to describe the JJ embedded in a TL: one is the series embed model [see, e.g., Zueco et al., Phys. Rev. B 86, 024503 (2012)] and another is the parallel embedded one [see, e.g., Yamamoto et al., Appl. Phys. Lett. 93, 042510 (2008)]. Here, beginning with the comparison of the theoretical predictions of these two models, we fabricate the JJ-embedded TL device and measure its microwave scattering parameters at 50-mK low temperature. The experimental results support the parallel embedded model, thus rule out the series embedded one. The present work might lay the physical foundation for the designs of various microwave JJ devices, such as the microwave photonic crystals, superconducting qubits, also the Josephson parameter amplifiers, etc., by embedding the JJs into the superconducting TLs.
As a typical nonlinear device, Josephson junction (JJ) can be either served as a microwave device to scatter the traveling microwave or embedded in a transmission line (TL) resonator to modify the mode structure. However, two mutually exclusive circuit models have been proposed to describe the JJ embedded in a TL: one is the series embed model [see, e.g., Zueco et al., Phys. Rev. B 86, 024503 (2012)] and another is the parallel embedded one [see, e.g., Yamamoto et al., Appl. Phys. Lett. 93, 042510 (2008)]. Here, beginning with the comparison of the theoretical predictions of these two models, we fabricate the JJ-embedded TL device and measure its microwave scattering parameters at 50-mK low temperature. The experimental results support the parallel embedded model, thus rule out the series embedded one. The present work might lay the physical foundation for the designs of various microwave JJ devices, such as the microwave photonic crystals, superconducting qubits, also the Josephson parameter amplifiers, etc., by embedding the JJs into the superconducting TLs.
Elastic scattering is one of the useful methods to control the transmission behaviors of microwave photons transporting in microwave quantum networks without energy consumption. Therefore, it is of practical significance for developing microwave quantum devices and constructing multi-node microwave quantum networks. The transmission line embedded by a single Josephson junction can be described by different circuit models (series and parallel). In this work, we first theoretically analyze the transmission characteristics of microwave photons scattered by different elastic scattering models described by series or parallel embedding models, generated by a single LC loop or a nonlinear Josephson junction device, respectively. The classical microwave transport theory predicts that the series LC loop and the parallel LC loop lead to different elastic scattering behaviors of microwave photons, i.e. the series LC circuit yields the resonant reflection and the parallel LC circuit leads alternatively to the resonant transmission. Recently, the transport properties of microwave photons scattered by a Josephson junction embedded in a transmission line have been discussed, and the results suggested that the Josephson junction embedded in the transmission line can be described by a series embedding circuit, which implies the resonant reflection. We argue here that if the Josephson junction is embedded in parallel in the transmission line, the elastically scattered microwave photons should be transmitted by resonant transmission. In order to test which of the above two different embedding circuit models yielding the completely different elastic scattering behaviors, is physically correct, we then fabricate such a device, i.e. a single Joseph junction device embedded in a transmission line, and measure its elastic scattering transmission coefficient at an extremely low temperature. The results are consistent with the expected effect of the parallel embedding circuit model, but inconsistent with the behaviors predicted by the series embedding circuit model in the literature. According to the above theoretical and experimental analyses of the elastic scattering of a single Josephson junction device, we further propose a scheme to control the elastic scattering behavior of microwave photons by modulating a DC superconducting quantum interference device with a bypass current, which can be applied to the construction of a microwave quantum network based on elastic scattering node controls.
This research investigates the realization of parametric amplification in superconducting circuits and structures where nonlinearity is provided by Josephson junction (JJ) elements. We aim to develop a systematic analysis over JJ-based devices toward design of novel traveling-wave Josephson parametric amplifiers (TW-JPA). Chapters of this thesis fall into three categories: lumped JPA, superconducting periodic structures and discrete Josephson transmission lines (DJTL). \nThe unbiased Josephson junction (JJ) is a nonlinear element suitable for parametric amplification through a four-photon process. Two circuit topologies are introduced to capture the unique property of the JJ in order to efficiently mix signal, pump and idler signals for the purpose of signal amplification. Closed-form expressions are derived for gain characteristics, bandwidth determination, noise properties and impedance for this kind of parametric power amplifier. The concept of negative resistance in the gain formulation is observed. A design process is also introduced to find the regimes of operation for gain achievement. Two regimes of operation, oscillation and amplification, are highlighted and distinguished in the result section. Optimization of the circuits to enhance the bandwidth is also carried out. \nMoving toward TW-JPA, the second part is devoted to modelling the linear wave propagation in a periodic superconducting structure. We derive closed-form equations for dispersion and s-parameters of infinite and finite periodic structures, respectively. Band gap formation is highlighted and its potential applications in the design of passive filters and resonators are discussed. The superconducting structures are fabricated using YBCO and measured, illustrating a good correlation with the numerical results. \nA novel superconducting Transmission Line (TL), which is periodically loaded by Josephson junctions (JJ) and assisted by open stubs, is proposed as a platform to realize a traveling-wave parametric device. Using the TL model, this structure is modeled by a system of nonlinear partial differential equations (PDE) with a driving source and mixed-boundary conditions at the input and output terminals, respectively. This model successfully emulates parametric and nonlinear microwave propagation when long-wave approximation is applicable. The influence of dispersion to sustain three non-degenerate phased-locked waves through the TL is highlighted. \nA rigorous and robust Finite Difference Time Domain (FDTD) solver based on the explicit Lax-Wendroff and implicit Crank-Nicolson schemes has been developed to investigate the device responses under various excitations. Linearization of the wave equation, under small-amplitude assumption, dispersion and impedance analysis is performed to explore more aspects of the device for the purpose of efficient design of a traveling-wave parametric amplifier. \nKnowing all microwave characteristics and identifying different regimes of operation, which include impedance properties, cut-off propagation, dispersive behaviour and shock-wave formation, we exploit perturbation theory accompanied by the method of multiple scale to derive the three nonlinear coupled amplitude equations to describe the parametric interaction. A graphical technique is suggested to find three waves on the dispersion diagram satisfying the phase-matching conditions. Both cases of perfect phase-matching and slight mismatching are addressed in this work. The incorporation of two numerical techniques, spectral method in space and multistep Adams-Bashforth in time domain, is employed to monitor the unilateral gain, superior stability and bandwidth of this structure. Two types of functionality, mixing and amplification, with their requirements are described. These properties make this structure desirable for applications ranging from superconducting optoelectronics to dispersive readout of superconducting qubits where high sensitivity and ultra-low noise operation is required.
We present a method to identify the coupled, normal modes of a superconducting transmission line with an embedded lumped element circuit. We evaluate the effective transmission-line nonlinearities in the case of Kerr-like Josephson interactions in the circuit and in the case where the embedded circuit constitutes a qubit degree of freedom, which is Rabi coupled to the field in the transmission line. Our theory quantitatively accounts for the very high and positive Kerr nonlinearities observed in a recent experiment [M. Reh\'ak, P. Neilinger, M. Grajcar, G. Oelsner, U. H\"ubner, E. Il'ichev, and H.-G. Meyer, Appl. Phys. Lett. 104, 162604 (2014)], and we can evaluate the accomplishments of modified versions of the experimental circuit.
Josephson junctions (JJ) are a fundamental component of microwave quantum circuits, such as tunable cavities, qubits, and parametric amplifiers. Recently developed encapsulated graphene JJs, with supercurrents extending over micron distance scales, have exciting potential applications as a new building block for quantum circuits. Despite this, the microwave performance of this technology has not been explored. Here, we demonstrate a microwave circuit based on a ballistic graphene JJ embedded in a superconducting cavity. We directly observe a gate-tunable Josephson inductance through the resonance frequency of the device and, using a detailed RF model, we extract this inductance quantitatively. We also observe the microwave losses of the device, and translate this into sub-gap resistances of the junction at μeV energy scales, not accessible in DC measurements. The microwave performance we observe here suggests that graphene Josephson junctions are a feasible platform for implementing coherent quantum circuits.
Detecting single-photon level signals—carriers of both classical and quantum information—is particularly challenging for low-energy microwave frequency excitations. Here we introduce a superconducting amplifier based on a Josephson junction transmission line. Unlike current standing-wave parametric amplifiers, this traveling wave architecture robustly achieves high gain over a bandwidth of several gigahertz with sufficient dynamic range to read out 20 superconducting qubits. To achieve this performance, we introduce a subwavelength resonant phase-matching technique that enables the creation of nonlinear microwave devices with unique dispersion relations. We benchmark the amplifier with weak measurements, obtaining a high quantum efficiency of 75% (70% including noise added by amplifiers following the Josephson amplifier). With a flexible design based on compact lumped elements, this Josephson amplifier has broad applicability to microwave metrology and quantum optics.
Phase shifters are a vital part of communication systems, and research into superconducting electronic devices has highlighted the possible application of Josephson junctions in this field of research. Intrinsic Josephson junctions (IJJs) are created by the high-density atomic-scale superconducting/insulator layering found within high temperature superconductors, such as Tl2Ba2CaCu2O8. This means a large number of series junctions are able to be created in relatively small dimensions in comparison to extrinsic devices limited in size by fabrication techniques. By designing IJJ tracks with large numbers of junctions in series, the phase shift from each individual junction sums to produce significant measurable phase tunability. I have studied the characteristics of IJJ tracks fabricated in Tl2Ba2CaCu2O8 to investigate the their use as microwave phase shifters. This involved determining the optimum track dimensions to ensure true Josephson behaviour of the IJJs by measuring the current-voltage characteristics at 4.2K. I have derived the equations governing the phase bias relationship, used these to simulate the expected junction characteristics based on the track parameters. These were then compared with the measured results and discussed in the context of other research in the field. Based on the phase tunability measured in the Tl2Ba2CaCu2O8 tracks, I then proceed to investigate the possible use of the coplanar IJJ transmission line as a parametric amplifier. The results presented highlight a small region of gain coupled to a geometric resonance, however this is not due to any parametric effect. Further research in this area is required to excite parametric amplification from these devices.