Optics Express

Recurrent multiport interferometers for fault-tolerant programmable photonics

Mihai Crisan, David A. Carpenter, Shamsul Arafin

Published May 19, 2025• 2 citations

Abstract

Universal linear programmable photonic circuits, composed of an array of Mach-Zehnder interferometers (MZIs), are fidelity-limited devices and are prohibitively difficult to scale. To address these limitations, we propose a compact and non-feedforward recurrent MZI topology wherein light can propagate in both directions. Our recurrent mesh achieves O ( N ) scaling by building imperfect beamsplitters in series to build perfect transformations. We theoretically examine the error tolerance of our proposed recurrent interferometer under imperfect mesh parameters. Our numerical results indicate that our proposed recurrent mesh permits more than an order of magnitude reduction in implementing unitary transformations.

DOI: 10.1364/oe.547540

Related papers

A Recurrent Multiport Interferometer Architecture for Fault-Tolerant Programmable Photonics

Mihai Crisan, David A. Carpenter, Shamsul Arafin

We propose a novel multiport interferometer architecture that uses optical recursion to mitigate hardware errors and scales as O(N). We also show that it is possible to construct perfect transformations with imperfect beamsplitters meshes.

Jan 1, 20240 citations

Asymptotically fault-tolerant programmable photonics

Ryan Hamerly, Saumil Bandyopadhyay, Dirk Englund

Component errors limit the scaling of programmable coherent photonic circuits. These errors arise because the standard tunable photonic coupler-the Mach-Zehnder interferometer (MZI)-cannot be perfectly programmed to the cross state. Here, we introduce two modified circuit architectures that overcome this limitation: (1) a 3-splitter MZI mesh for generic errors, and (2) a broadband MZI+Crossing design for correlated errors. Because these designs allow for perfect realization of the cross state, the matrix fidelity no longer degrades with increased mesh size, allowing scaling to arbitrarily large meshes. The proposed architectures support progressive self-configuration, are more compact than previous MZI-doubling schemes, and do not require additional phase shifters. This removes a key limitation to the development of very-large-scale programmable photonic circuits.

arXiv:2109.05367Nature CommunicationsNov 29, 202270 citations

Design of asymptotically perfect linear photonic circuits

Ryan Hamerly, Saumil Bandyopadhyay, Alexander Sludds +1 more

Conventional multiport interferometers based on MZI meshes suffer from component imperfections, which limit their scaling. We introduce two new designs that overcome this limitation: a 3-splitter MZI for generic errors and a broadband MZI+Crossing design for more realistic correlated errors. These architectures, motivated by the correspondence between SU(2) and the Riemann sphere, are more error tolerant than the standard MZI mesh and support progressive self-configuration. Numerical simulations reveal orders-of-magnitude error reductions compared to the standard MZI mesh; moreover, the mesh is asymptotically perfect: the matrix error decreases with mesh size.

AI and Optical Data SciencesMar 3, 20220 citations

Multiport field-programmable MZI-Based optical processors

Farhad Shokraneh

There has been an escalating demand for dynamically reconﬁgurable photonic structures to implement any linear optical transformation between the input and output ports. Such devices are often constructed as a mesh of reconﬁgurable Mach-Zehnder interferometers(MZIs). Consequently, the programmed MZIs can redistribute the light to implementarbitrary unitary transformations from an input vector of optical signals to an outputvector of coherent optical modes. These structures have been widely used as a promising hardware platform for fast and energy-eﬃcient matrix multiplications in diﬀerent applications, such as information processing, machine learning algorithms, neural networks(NNs), etc. Matrix multiplication is an essential but time- and energy-consuming operation in machine learning computations. The computational complexity of NNs necessitates well designed and implemented hardware accelerators for fast and energy-eﬃcient data processing, which allows for scaling the structure to larger NNs in current and upcoming applications. Over the last few years, the considerable progress in silicon photonics has made it possible to fabricate multiport optical interferometric structures with small ootprints and high-power eﬃciency, which can be exploited as hardware accelerators, thanks to the inherent parallelism of optics. This Ph.D. thesis presents the theoretical and experimental analysis of multiport reconﬁgurable MZI-based optical processors. The optical processors are meshes of 2×2 reconﬁgurable MZIs. It is demonstrated how the optical transformation matrix of the optical processors is theoretically decomposed for a given application. The Reck-mesh-based optical processor is experimentally calibrated before programming the device for a given application. Additionally, the thesis includes the theoretical and measurement results of a single layer NN implemented by a 4×4 Reck-mesh-based optical processor. Finally, a novel phase-error- and loss-tolerant multiport ﬁeld-programmable MZI-based optical processor for optical NNs is proposed. The new structure with a diamond mesh shape makes use of a set of additional MZIs compared to the commonly used Reck (triangular) mesh. The additional MZIs in the Diamond mesh make its topology more symmetric yielding higher phase error- and loss-tolerance, and also provide extra degrees of freedom in the optimization of ONN weight matrix during training. Furthermore, the better classiﬁcation performance of the Diamond mesh compared to the Reck mesh is associated with the fact that the Diamond mesh is capable of excluding the light intensity that could have degraded the classiﬁcation accuracy of the implemented ONNs. This is done by means of the tapered-out wave guides of the additional MZIs in the Diamond mesh, while the optimal light intensity is sent to its outputs for better classiﬁcation. The demonstration of these analyses is signiﬁcant as it can be used to implement any universal ﬁeld-programmable photonic device as an optical processor, i.e., optical computational accelerator, which can be experimentally programmed to implement arbitrary linear optical transformation matrix for a given application. Additionally, the presented analytical results in this thesis can be used to enhance the classiﬁcation performance of ONNs implemented by such structures. As a result of these analyses, the thesis proposes the Diamond-mesh-based optical processor as a promising candidate for large scale ONNs which outperforms the Reck-mesh-based ones in the presence of experimental imperfections

Jan 1, 20210 citations

Optimal design of error-tolerant reprogrammable multiport interferometers

Suren A. Fldzhyan, M. Yu. Saygin, S. P. Kulik

Photonic information processing demands programmable multiport interferometers capable of implementing arbitrary transfer matrices, for which planar meshes of error-sensitive Mach-Zehnder interferometers are usually exploited. We propose an alternative design that uses a single-static beam splitter (BS) and a variable phase shift as the building blocks. The design possesses superior resilience to manufacturing errors and losses without extra elements added into the scheme. Namely, the power transmissivities of the static BSs can take arbitrary values in the range from ≈1/2 to ≈4/5. In this Letter, we show that the fraction of transfer matrices non-implementable by the interferometers of our design diminishes rapidly with its size.

arXiv:1910.13001Optics LettersMar 31, 202046 citations

Universal Photonic Circuits with Interlaced Operator Architectures

Matthew Markowitz

In recent years, there has been growing interest in analog information processing and unconventional computing using Photonic Integrated Circuits (PICs) to address the increasing demands of next-generation computing. This has driven the development of on-chip architectures capable of implementing fundamental linear operations such as matrix-vector multiplication (MVM), which plays a central role in fields such as quantum information processing and the acceleration of deep neural networks. Within the feed-forward paradigm, interleaved meshes of Mach–Zehnder Interferometers (MZIs) have emerged as the leading architecture for programmable integrated photonics (PIP), enabling real-time implementation of arbitrary linear transformations using tunable phase shifter elements. More recently, an alternative class of programmable photonic architectures based on Multi-Plane Light Conversion (MPLC) has been proposed, consisting of alternating diagonal phase-shifter layers and multimode mixing elements. Although these architectures lack a deterministic synthesis algorithm for the phase actuators, they have been shown to offer several advantages over conventional MZI-based architectures. In this thesis we investigate the properties and universal capabilities of MPLC architectures utilizing unequally spaced coupled waveguide arrays (CWAs), with a particular emphasis on the well-known Jx-lattice. Defect tolerance and self-calibration properties are studied, demonstrating substantially greater robustness to imperfections than conventional MZI meshes. We further introduce several extensions of the MPLC architecture that demonstrate its flexibility, such as the redistribution of amplitude modulators and their interchangeable use with phase shifters to realize universal transformations with a near-minimal number of tunable units. Collectively, these results provide a broader understanding of the capabilities of MPLC architectures and establish a foundation for their application as a flexible alternative and complement to MZI-based designs.

Sep 1, 20260 citations