Abstract Parametric amplifiers have become significant components in qubit readout within circuit quantum electrodynamics. Devices based on high-kinetic inductance (HKI) material can provide an avenue to achieve the considerable gain of parametric amplification. In this work, we develop a parametric amplifier using a multimode HKI coplanar waveguide cavity. We explore two pumping schemes, achieving significant gains for multiple modes in both the monochromatic and bichromatic pump schemes. We first measure parametric amplification in the monochromatic pump scheme, achieving over 10 dB gain in all modes. In the bichromatic pump scheme, two distinct gain regions emerge in the spectra, accompanied by a triangle-like pattern. Moreover, the bichromatic pump scheme yields a higher gain value than the monochromatic pump scheme, with the maximum gain exceeding 27 dB . This parametric amplifier holds potential applications, such as frequency-division multiplexing readout, which is beneficial for scaling up qubits in quantum computing.
Abstract Parametric amplifiers have become significant components in qubit readout within circuit quantum electrodynamics. Devices based on high-kinetic inductance (HKI) material can provide an avenue to achieve the considerable gain of parametric amplification. In this work, we develop a parametric amplifier using a multimode HKI coplanar waveguide cavity. We explore two pumping schemes, achieving significant gains for multiple modes in both the monochromatic and bichromatic pump schemes. We first measure parametric amplification in the monochromatic pump scheme, achieving over 10 dB gain in all modes. In the bichromatic pump scheme, two distinct gain regions emerge in the spectra, accompanied by a triangle-like pattern. Moreover, the bichromatic pump scheme yields a higher gain value than the monochromatic pump scheme, with the maximum gain exceeding 27 dB . This parametric amplifier holds potential applications, such as frequency-division multiplexing readout, which is beneficial for scaling up qubits in quantum computing.
Parametric amplification is essential for quantum measurement, enabling the amplification of weak microwave signals with minimal added noise. While Josephson-junction-based amplifiers have become standard in superconducting quantum circuits, their magnetic sensitivity, limited saturation power, and sub-kelvin operating requirements motivate the development of alternative nonlinear platforms. Here we demonstrate a two-mode kinetic-inductance parametric amplifier based on a pair of capacitively coupled Kerr-nonlinear resonators fabricated from NbTiN and NbN thin films. The distributed Kerr nonlinearity of these materials enables nondegenerate four-wave-mixing amplification with gains approaching 40 dB, gain-bandwidth products up to 6.9 MHz, and 1-dB compression powers two to three orders of magnitude higher than those of state-of-the-art Josephson amplifiers. A coupled-mode theoretical model accurately captures the pump-induced modification of the hybridized modes and quantitatively reproduces the observed signal and idler responses. The NbN device exhibits a significantly larger Kerr coefficient and superior gain-bandwidth performance, highlighting the advantages of high-kinetic-inductance materials. Our results establish coupled kinetic-inductance resonators as a robust platform for broadband, high-power, and magnetically resilient quantum-limited amplification, offering a scalable route for advanced readout in superconducting qubits, spin ensembles, quantum dots, and other microwave-quantum technologies.
Advancing superconducting quantum devices to higher operating frequencies broadens their functionality and enables operation at elevated temperatures, but it also requires near-quantum-limited amplifiers beyond the few-gigahertz regime. Here we present a junction-free, kinetic-inductance parametric amplifier based on thin-film niobium nitride (NbN) operating at 23 GHz in the microwave K-band, achieving a gain up to 40 dB, a 100 MHz gain-bandwidth product, a 1 dB saturation input power of -85 dBm with 23 dB gain, and added noise no greater than 1.4 quanta for phase-preserving amplification. Leveraging the large superconducting gap of NbN, this architecture can be extended to even higher frequencies, supporting applications such as high-fidelity readout of millimeter-wave superconducting qubits and axion searches over an expanded mass window.
Advancing superconducting quantum devices to higher operating frequencies broadens their functionality and enables operation at elevated temperatures, but it also requires near-quantum-limited amplifiers beyond the few-gigahertz regime. Here, we present a junction-free, kinetic-inductance parametric amplifier based on thin-film niobium nitride (NbN) operating at 23 GHz in the microwave K-band, achieving a gain up to 40 dB, a 100 MHz gain–bandwidth product, a 1 dB saturation input power of −85 dBm with 23 dB gain, and added noise not greater than 1.4 quanta for phase-preserving amplification. Leveraging the large superconducting gap of NbN, this architecture can be extended to even higher frequencies, supporting applications such as high-fidelity readout of millimeter-wave superconducting qubits and axion searches over an expanded mass window.
One of the primary requirements for superconducting quantum information processors is high-fidelity, quantum non-demolition qubit readout. In superconducting circuits, we perform measurements with quantum-limited microwave amplifiers. These amplifiers are based on microwave cavities and powered by Josephson-junction based nonlinearities, which we drive to parametrically modulate the circuit and generate gain. However, cavity-based amplifiers generally suffer from a fixed gain-bandwidth product, a limited dynamic range, and the absence of directionality, and so they must be operated with external lossy microwave commercial components such as circulators. Many of these limitations can be circumvented by combining multiple parametric processes in a few-mode device, in particular by combining parametric drives which produce gain and those which produce gainless photon conversion. By combining balanced gain and conversion processes between a pair of modes, we have demonstrated transmission-only, phase-sensitive, gain-bandwidth-free amplification. We have also used measurements of transmon qubits with this mode of amplification to demonstrate its practical utility. More, by combining multiple instances of imbalanced gain and conversion processes among three modes, we have realized devices with non-reciprocal, transmission-only amplification, matched ports, and a large, gain-independent bandwidth. One of the biggest challenges in tuning multiple parametric processes is both inherent and dynamically-generated higher order nonlinearities in the device, which shift mode frequencies and parametric coupling strengths with pump power, preventing accurate balancing of the parametric processes. These can be controlled through engineering the Hamiltonian of the nonlinear element, in this thesis either a linearly-shunted Josephson Ring Modulator or SNAIL (Superconducting Nonlinear Asymmetric Inductive eLements), which for certain applied flux values can minimize or even change the sign of higher-order even nonlinearities. Additionally, we have explored a range of circuit parameters, allowing us to also control the relative size of odd-order nonlinearities. We have developed a series of prototypes which implement these concepts, and have achieved both high-dynamic range singly pumped amplifiers, and a promising platform for multi-parametric devices. We conclude by presenting recent progress towards implementing multiple parametric schemes that generates a practical directional amplifier, and discuss the remaining obstacles to a truly ideal parametric amplifiers.
Parametric converters are parametric amplifiers that mix two spatially separate nondegenerate modes and are commonly used for amplifying and squeezing microwave signals in quantum computing and sensing. In Josephson parametric converters, the strong localized nonlinearity of the Josephson junction limits the amplification and squeezing, as well as the dynamic range, in current devices. In contrast, a weak distributed nonlinearity can provide higher gain and dynamic range, when implemented as a kinetic inductance (KI) nanowire of a dirty superconductor, and has additional benefits such as resilience to magnetic field, higher-temperature operation, and simplified fabrication. Here, we propose, demonstrate, and analyze the performance of a KI parametric converter that relies on the weak distributed nonlinearity of a Nb-Ti-N KI nanowire. The device utilizes three-wave mixing induced by a dc current bias. We demonstrate its operation as a nondegenerate parametric amplifier with high phase-sensitive gain, reaching two-mode amplification and deamplification of approximately 30 dB for two resonances separated by 0.8 GHz, in excellent agreement with our theory of the device. We observe a dynamic range of $\ensuremath{-}108$ dBm at 30 dB gain. Our device can significantly broaden applications of quantum-limited signal processing devices including phase-preserving amplification and two-mode squeezing.
In microwave-based quantum circuits, including double quantum dots (DQDs), superconducting qubits and spin qubits, parametric amplifiers are indispensable in achieving high-fidelity qubit readouts. Despite its importance, the application of parametric amplifiers is hampered by several challenges, such as high insertion losses, constrained tunability, and a pronounced vulnerability to magnetic fields. Here, we demonstrate an on-site single-atom parametric amplifier (SAPA) within a reconfigurable quantum circuit, which consists of a superconducting microwave cavity and two GaAs gate-defined DQDs. Leveraging the inherent nonlinearity of the DQD, a parametric gain exceeding 11 dB is achieved. This gain contributes to enhance the qubit readout, as evidenced by exceeding two times improvement in the signal-to-noise ratio (SNR) when employing the DQD-based amplifier for reading out another DQD. Our work not only presents a versatile experimental platform with enhanced readout capabilities in quantum computing, but also introduces alternative choices of parametric amplifiers for a variety of microwave-based quantum circuits.