The authors introduce a polarization agnostic encoding method for continuous-variable quantum key distribution. No active optical polarization control is required and only a single receiver polarization is monitored. These simplifications reduce loss and noise.
The review examines the essential characteristics of continuous-variable quantum key distribution protocols. In these protocols, information is encoded into the complex amplitude of the optical field, which can have a continuous range of values, unlike a qubit. An advantage over many other quantum key distribution protocols is provided by the fact that the practical implementation of these protocols does not require sources and single-photon detectors. Additionally, they offer a relatively high rate of secret key generation. However, continuous-variable protocols require a specific analysis of secrecy and special consideration for the influence of noise that may arise during practical implementation. This presents a broad area for further research.
Subject of study. This study considers a polarization control method of optical radiation for a continuous-variable quantum key distribution system for correct polarization demultiplexing of the local oscillator and signal state necessary to ensure the correct performance of the presented system. Aim of study. This study aims to develop a system of active polarization control and experimentally evaluate the effect of this system on the continuous-variable quantum key distribution system parameters. Method. The polarization control system considered in this study is based on constant analysis of the local oscillator radiation and maximization of its intensity due to the stochastic gradient descent algorithm. Local oscillator fluctuations occur because of the principle of active polarization control operation. An experimental setup simulating the sender and receiver module of the continuous-variable quantum key distribution system is used to evaluate the introduced noise. This setup enables evaluation of the noise introduced by the controller operation. Main results. Excess noise caused by the polarization controller is comparable with the polarization noise generated in the quantum key distribution system. Practical significance. Correct operation of a continuous-variables quantum key distribution system can be implemented exclusively with the use of a polarization control device. Knowledge of the polarization control effect on the system gains an understanding of the possible future methods for designing and developing continuous-variables quantum key distribution systems.
Continuous-Variable (CV)-Quantum Key Distribution (QKD) addresses the key distribution problem encoding the information using coherent states, ensuring security by monitoring the noise of the exchanged states. This approach offers high key rates and compatibility with standard telecommunication infrastructure, with fiber-deployed CV-QKD systems extensively demonstrated. However, the long-term stability of these systems remains challenged by the polarization drift. While polarization effects are often assumed negligible or actively compensated, their impact on the secret key rate (SKR) over extended operation has not been fully quantified. In this work, we present a comprehensive analysis of the temporal evolution of the Stokes parameters and SKR under varying polarization drift variances, adopting a stochastic approach to emulate the polarization drift. Through extensive simulations, we identify three distinct regimes: an ideal-case approximation with negligible effects; a transition region with progressive signal distortion, biased channel parameter estimation, and SKR degradation; and a worst-case scenario leading to angular displacements near 90°, collapsed correlation, and null SKR. The polarization coherence time rapidly decreases with increasing polarization drift variance, from nearly one hour at 10−14 to sub-second durations above 10−11. These findings offer critical insights into the interplay between polarization dynamics and system security, informing the design of robust CV-QKD deployments. While active compensation of polarization drift using dynamic controllers require continuous monitoring, passive strategies such as polarization-diversity receivers and digital signal processing-based techniques provide practical alternatives for field-deployed CV-QKD systems.