Abstract Measurement-device-independent quantum digital signature (MDI-QDS) guarantees the authenticity and integrity of a message with security against all detector side-channel attacks. However, the experimental implementation of MDI-QDS in actual systems is extremely complicated since: (i) high-visibility interference requires several additional active control units for mode matching; (ii) a key assumption in MDI-QDS is that the laser source located at each user should be trusted. In this work, we propose a plug-and-play MDI-QDS scheme with a single untrusted source. On the one hand, it completely eliminates the requirement that each user must have a trusted laser source, and only needs to set an untrusted source at the Relay. On the other hand, the mode matching of MDI-QDS can be realized automatically with a plug-and-play structure. We then discuss the performance of the scheme by using the two-intensity decoy-state method with full parameter optimization. The numerical simulations show that the plug-and-play MDI-QDS with a single untrusted source provides comparable performances to the original MDI-QDS in a low-loss regime but with a simpler experimental setup. Consequently, the scheme can be flexibly implemented with common optical components in an optical fiber network since users can share both detectors and a complicated laser source.
Abstract Measurement-device-independent quantum digital signature (MDI-QDS) guarantees the authenticity and integrity of a message with security against all detector side-channel attacks. However, the experimental implementation of MDI-QDS in actual systems is extremely complicated since: (i) high-visibility interference requires several additional active control units for mode matching; (ii) a key assumption in MDI-QDS is that the laser source located at each user should be trusted. In this work, we propose a plug-and-play MDI-QDS scheme with a single untrusted source. On the one hand, it completely eliminates the requirement that each user must have a trusted laser source, and only needs to set an untrusted source at the Relay. On the other hand, the mode matching of MDI-QDS can be realized automatically with a plug-and-play structure. We then discuss the performance of the scheme by using the two-intensity decoy-state method with full parameter optimization. The numerical simulations show that the plug-and-play MDI-QDS with a single untrusted source provides comparable performances to the original MDI-QDS in a low-loss regime but with a simpler experimental setup. Consequently, the scheme can be flexibly implemented with common optical components in an optical fiber network since users can share both detectors and a complicated laser source.
Digital signatures play an important role in software distribution, modern communication, and financial transactions, where it is important to detect forgery and tampering. Signatures are a cryptographic technique for validating the authenticity and integrity of messages, software, or digital documents. The security of currently used classical schemes relies on computational assumptions. Quantum digital signatures (QDS), on the other hand, provide information-theoretic security based on the laws of quantum physics. Recent work on QDS Amiri et al., Phys. Rev. A 93, 032325 (2016); Yin, Fu, and Zeng-Bing, Phys. Rev. A 93, 032316 (2016) shows that such schemes do not require trusted quantum channels and are unconditionally secure against general coherent attacks. However, in practical QDS, just as in quantum key distribution (QKD), the detectors can be subjected to side-channel attacks, which can make the actual implementations insecure. Motivated by the idea of measurement-device-independent quantum key distribution (MDI-QKD), we present a measurement-device-independent QDS (MDI-QDS) scheme, which is secure against all detector side-channel attacks. Based on the rapid development of practical MDI-QKD, our MDI-QDS protocol could also be experimentally implemented, since it requires a similar experimental setup.
Measurement-device-independent quantum key distribution (MDI-QKD) can provide enhanced security compared to traditional QKD, and it constitutes an important framework for a quantum network with an untrusted network server. Still, a key assumption in MDI-QKD is that the sources are trusted. We propose here a MDI quantum network with a single untrusted source. We have derived a complete proof of the unconditional security of MDI-QKD with an untrusted source. Using simulations, we have considered various real-life imperfections in its implementation, and the simulation results show that MDI-QKD with an untrusted source provides a key generation rate that is close to the rate of initial MDI-QKD in the asymptotic setting. Our work proves the feasibility of the realization of a quantum network. The network users need only low-cost modulation devices, and they can share both an expensive detector and a complicated laser provided by an untrusted network server.
Quantum digital signatures (QDSs), which distribute and measure quantum states by key generation protocols and then sign messages via classical data processing, are a key area of interest in quantum cryptography. However, the practical implementation of a QDS network has many challenges, including complex interference technical requirements, linear channel loss of quantum state transmission, and potential side-channel attacks on detectors. Here, we propose an asynchronous measurement-device-independent (MDI) QDS protocol with asynchronous two-photon interference strategy and one-time universal hashing method. The two-photon interference approach protects our protocol against all detector side-channel attacks and relaxes the difficulty of experiment implementation, while the asynchronous strategy effectively reduces the equivalent channel loss to its square root. Compared to previous MDI-QDS schemes, our protocol shows several orders of magnitude performance improvements and doubling of transmission distance when processing multibit messages. Our findings present an efficient and practical MDI-QDS scheme, paving the way for large-scale data processing with nonrepudiation in quantum networks.
Quantum digital signatures (QDSs) provide a means for signing electronic communications with information-theoretic security. However, all previous demonstrations of quantum digital signatures assume trusted measurement devices. This renders them vulnerable against detector side-channel attacks, just like quantum key distribution. Here we exploit a measurement-device-independent (MDI) quantum network, over a metropolitan area, to perform a field test of a three-party MDI QDS scheme that is secure against any detector side-channel attack. In so doing, we are able to successfully sign a binary message with a security level of about ${10}^{\ensuremath{-}7}$. Remarkably, our work demonstrates the feasibility of MDI QDSs for practical applications.
Measurement-device-independent quantum key distribution (MDI-QKD) is immune to all security loopholes on detection. Previous experiments on MDI-QKD required spatially separated signal lasers and complicated stabilization systems. In this paper, we perform a proof-of-principle experimental demonstration of plug-and-play MDI-QKD over an asymmetric channel setting with a single signal laser in which the whole system is automatically stabilized in spectrum, polarization, arrival time, and phase reference. Both the signal laser and the single-photon detectors are in the possession of a common server. A passive timing-calibration technique is applied to ensure the precise and stable overlap of signal pulses. The results pave the way for the realization of a quantum network in which the users only need the encoding devices.
Quantum key distribution (QKD) guarantees unconditional communication security based on the laws of quantum physics. However, practical QKD suffers from a number of quantum hackings due to the device imperfections. From the security standpoint, measurement-device-independent quantum key distribution (MDI-QKD) is in the limelight since it eliminates all the possible loopholes in detection. Due to active control units for mode matching between the photons from remote parties, however, the implementation of MDI-QKD is highly impractical. In this paper, we propose a method to resolve the mode matching problem while minimizing the use of active control units. By introducing the plug-and-play (P) concept into MDI-QKD, the indistinguishability in spectral and polarization modes between photons can naturally be guaranteed. We show the feasibility of P MDI-QKD with a proof-of-principle experiment.