The transfer of quantum entangled states is of fundamental interest in quantum physics and plays an important role in quantum information processing, quantum communication, and quantum technology. Here, we propose a scheme to transfer quantum entangled states of two photonic qubits by utilizing four microwave cavities coupled to a superconducting qutrit (a three-level quantum system). The photonic qubits are encoded using two orthogonal eigenstates of the photon-number parity operator with eigenvalues ± 1, which allows for various encodings for the photonic qubits. The employment of four cavities at distinct frequencies effectively reduces the inter-cavity crosstalk. The utilization of only a single superconducting qutrit as the coupler significantly reduces the circuit resources. The entanglement transfer can be completed in just one step, making this scheme remarkably efficient. During the state transfer process, the third energy level of the coupler qutrit remains unoccupied, and thus decoherence from this level is diminished. Our numerical simulations demonstrate that within current circuit quantum electrodynamics technology, one can achieve high-fidelity transfer of the entangled states of two photonic qubits encoded via squeezed vacuum states and cat states. Our scheme possesses generality and can be applied to accomplish the same task in a variety of physical systems.
The transfer of quantum entangled states is of fundamental interest in quantum physics and plays an important role in quantum information processing, quantum communication, and quantum technology. Here, we propose a scheme to transfer quantum entangled states of two photonic qubits by utilizing four microwave cavities coupled to a superconducting qutrit (a three-level quantum system). The photonic qubits are encoded using two orthogonal eigenstates of the photon-number parity operator with eigenvalues ± 1, which allows for various encodings for the photonic qubits. The employment of four cavities at distinct frequencies effectively reduces the inter-cavity crosstalk. The utilization of only a single superconducting qutrit as the coupler significantly reduces the circuit resources. The entanglement transfer can be completed in just one step, making this scheme remarkably efficient. During the state transfer process, the third energy level of the coupler qutrit remains unoccupied, and thus decoherence from this level is diminished. Our numerical simulations demonstrate that within current circuit quantum electrodynamics technology, one can achieve high-fidelity transfer of the entangled states of two photonic qubits encoded via squeezed vacuum states and cat states. Our scheme possesses generality and can be applied to accomplish the same task in a variety of physical systems.
We propose a method for transferring quantum entangled states of two photonic cat-state qubits ( cqubits ) from two microwave cavities to the other two microwave cavities. This proposal is realized by using four microwave cavities coupled to a superconducting flux qutrit. Because of using four cavities with different frequencies, the inter-cavity crosstalk is significantly reduced. Since only one coupler qutrit is used, the circuit resource is minimized. The entanglement transfer is completed with a singlestep operation only, thus this proposal is quite simple. The third energy level of the coupler qutrit is not populated during the state transfer, therefore decoherence from the higher energy level is greatly suppressed. Our numerical simulations show that high-fidelity transfer of two- cqubit entangled states from two transmission line resonators to the other two transmission line resonators is feasible with current circuit QED technology. This proposal is universal and can be applied to accomplish the same task in a wide range of physical systems, such as four microwave or optical cavities, which are coupled to a natural or artificial three-level atom.
In recent years, quantum state engineering and quantum information processing using microwave fields and photons have received increasing attention. In addition, multiqubit gates play an important role in quantum information processing. In this work, we propose to encode a photonic qubit via two arbitrary orthogonal eigenstates (with eigenvalues $\ifmmode\pm\else\textpm\fi{}1$, respectively) of the photon-number parity operator. With such encoding, we then present a single-step method to realize a multi-target-qubit controlled-phase gate with one photonic qubit simultaneously controlling $n\ensuremath{-}1$ target photonic qubits, by employing n microwave cavities coupled to one superconducting flux qutrit. This proposal can be applied not only to implement nonhybrid multi-target-qubit controlled-phase gates using photonic qubits with various encodings, but also to realize hybrid multi-target-qubit controlled-phase gates using photonic qubits with different encodings. The gate realization requires only a single-step operation. The gate operation time does not increase with the number of target qubits. Because the qutrit remains in the ground state during the entire operation, decoherence from the qutrit is greatly suppressed. As an application, we show how to apply this gate to generate a multicavity Greenberger-Horne-Zeilinger (GHZ) entangled state with general expression. Depending on the specific encodings, we further discuss the preparation of several nonhybrid and hybrid GHZ entangled states of multiple cavities. We numerically investigate the circuit-QED experimental feasibility of creating a three-cavity spin-coherent hybrid GHZ state. This proposal can be extended to accomplish the same tasks in a wide range of physical systems, such as multiple microwave or optical cavities coupled to a three-level natural or artificial atom.
We present a way to transfer maximally- or partially-entangled states of n single-photon-state (SPS) qubits onto n coherent-state (CS) qubits, by employing 2 n microwave cavities coupled to a superconducting flux qutrit. The two logic states of a SPS qubit here are represented by the vacuum state and the single-photon state of a cavity, while the two logic states of a CS qubit are encoded with two coherent states of a cavity. Because of using only one superconducting qutrit as the coupler, the circuit architecture is significantly simplified. The operation time for the state transfer does not increase with the increasing of the number of qubits. When the dissipation of the system is negligible, the quantum state can be transferred in a deterministic way since no measurement is required. Furthermore, the higher-energy intermediate level of the coupler qutrit is not excited during the entire operation and thus decoherence from the qutrit is greatly suppressed. As a specific example, we numerically demonstrate that the high-fidelity transfer of a Bell state of two SPS qubits onto two CS qubits is achievable within the present-day circuit QED technology. Finally, it is worthy to note that when the dissipation is negligible, entangled states of n CS qubits can be transferred back onto n SPS qubits by performing reverse operations. This proposal is quite general and can be extended to accomplish the same task, by employing a natural or artificial atom to couple 2 n microwave or optical cavities.
Transferring entangled states between matter qubits and microwave-field (or optical-field) qubits is of fundamental interest in quantum mechanics and necessary in hybrid quantum information processing and quantum communication. We here propose a way for transferring entangled states between superconducting qubits (matter qubits) and microwave-field qubits. This proposal is realized by a system consisting of multiple superconducting qutrits and microwave cavities. Here, “qutrit” refers to a three-level quantum system with the two lowest levels encoding a qubit while the third level acting as an auxiliary state. In contrast, the microwave-field qubits are encoded with coherent states of microwave cavities. Because the third energy level of each qutrit is not populated during the operation, decoherence from the higher energy levels is greatly suppressed. The entangled states can be deterministically transferred because measurement on the states is not needed. The operation time is independent of the number of superconducting qubits or microwave-field qubits. In addition, the architecture of the circuit system is quite simple because only a coupler qutrit and an auxiliary cavity are required. As an example, our numerical simulations show that high-fidelity transfer of entangled states from two superconducting qubits to two microwave-field qubits is feasible with present circuit QED technology. This proposal is quite general and can be extended to transfer entangled states between other matter qubits (e.g., atoms, quantum dots, and NV centers) and microwave- or optical-field qubits encoded with coherent states.
The controlled transfer of quantum entangled states is a fascinating topic in quantum physics, and has potential applications in fields such as quantum network communication, distributed quantum information processing, and development of quantum functional devices. This study focuses on a circuit quantum electrodynamics (QED) system, comprising an input port, two output ports, and a quantum switch. The input port or each output port contains n microwave cavities. The switch is a superconducting transmon qutrit (three-level quantum system). The vacuum and single-photon states in each cavity encode a photonic qubit. We demonstrate that the single-excitation symmetric (SES) entangled state of n photonic qubits can be transferred from the n cavities at the input port to the n cavities at either of the two output ports, controlled by the switch. Remarkably, the operational time decreases as the number n increases. The only use of qutrit-cavity resonant interaction enables rapid quantum state transfer while effectively suppressing system decoherence. This proposal can be used to achieve the controlled transfer of both Bell states and W states of photonic qubits via a quantum switch. To validate the experimental feasibility, we numerically simulate two scenarios: (i) transferring the Bell state of two photonic qubits, and (ii) transferring the W state of three photonic qubits. This proposal may be extended to accomplish the same task in other physical systems, where the switch is implemented with a three-level artificial atom of different types while each cavity is a microwave or optical cavity.
We propose a simple method to realize a hybrid controlled–controlled-Z (CCZ) gate with two photonic qubits simultaneously controlling a superconducting (SC) target qubit, by employing two microwave cavities coupled to a SC ququart (a four-level quantum system). In this proposal, each control qubit is a photonic qubit, which is encoded by two arbitrary orthogonal eigenstates (with eigenvalues ±1, respectively) of the photon-number parity operator. Since the two arbitrary encoding states can take various quantum states, this proposal can be applied to realize the hybrid CCZ gate, for which the two control photonic qubits can have various encodings. The gate realization is quite simple because only a basic operation is needed. During the gate operation, the higher energy intermediate levels of the ququart are not occupied, and, thus, decoherence from these levels is greatly suppressed. We further discuss how to apply this gate to generate a hybrid Greenberger–Horne–Zeilinger (GHZ) entangled state of a SC qubit and two photonic qubits, which takes a general form. As an example, our numerical simulation demonstrates that high-fidelity generation of a cat–cat–spin hybrid GHZ state is feasible within current circuit QED technology. This proposal is quite general, which can be applied to realize the hybrid CCZ gate as well as to prepare various hybrid GHZ states of a matter qubit and two photonic qubits in other physical systems, such as two microwave or optical cavities coupled to a four-level natural or artificial atom.