Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Microwave Theory and Techniques

Local Oscillator Port-Integrated Resonators for Sensitivity Enhancement of VHF Band Rydberg Atomic Heterodyne Receivers

Kai Yang, Yi Lin, Zhenke Ding, Qiang An, Zhanshan Sun, Yunqi Fu

Published Jan 22, 2025• 27 citations
Publisher

Abstract

The Rydberg atomic heterodyne technique and resonant structures represent two prominent approaches that can notably enhance the sensing sensitivity of Rydberg atomic receivers in the atomic and microwave domains, respectively. However, current implementations exhibit low levels of integration, particularly in the VHF band. This article introduces local oscillator (LO) port-integrated resonators (LOIRs) to synergize these methods, aiming to improve sensitivity and system integration in Rydberg atom-based receivers. Through an analysis of the electric field distribution in the split-ring resonator (SRR), we developed two types of LOIRs: the standing wave type LOIR (SIR) and the traveling wave type LOIR (TIR). Experimental investigations were conducted at 264 MHz using a vapor cell containing cesium atoms in the resonators. Spectral measurements indicate that the SIR and TIR provide enhancement factors of 45.8 and 45.3 dB, respectively. When employing the SIR and TIR for Rydberg atomic heterodyning, sensitivity significantly improved to 104.34 and 105.54 (nV/cm)/$\sqrt {\text {Hz}}$, respectively. Furthermore, in comparison to the SRR setup in the atomic heterodyne scenario, the LO power consumption decreased to 22.4% and 3.7% with the SIR and TIR, respectively. This research represents a significant advancement toward the practical application of Rydberg atomic receivers.

DOI
10.1109/tmtt.2025.3528720

Related papers

Local oscillator port embedded field enhancement resonator for Rydberg atomic heterodyne technique

Kai Yang, Ruiqi Mao, Li He +4 more

Abstract Rydberg atom-based sensors using the atomic heterodyne technique demonstrate prominent performance on sensing sensitivity and thus have significant potential for radar, electronic reconnaissance, and communication applications. Here, we propose a local oscillator (LO) embedded field enhancement resonator to improve the sensitivity and integration of Rydberg atomic heterodyne sensors. In this approach, a vapor cell filled with cesium atoms is placed into the resonance structure for electric (E) field measurements. By integrating parallel-plate waveguide (PPWG) antennas and the resonator, the LO signal can be directly guided to the resonator using coaxial cable instead of the use of external antennas radiating through free space, allowing for a more flexible and practical Rydberg atom-based heterodyne technique. Based on the off-resonant Rydberg atomic heterodyne approach, for a radio frequency (RF) signal at 638 MHz, it is found that the sensitivity is 43 μ V/cm $\sqrt{\text{Hz}}$ Hz in the absence of the resonator, while in the presence of our resonator, the sensitivity is down to 854.36 nV/cm $\sqrt{\text{Hz}}$ Hz , indicating 50 times or 34 dB improvement capacity of the proposed resonator. This type of enhancement resonator is expected to benefit Rydberg atomic heterodyne applications in practical environments.

EPJ Quantum Technology•Jun 26, 2023•27 citations

Local oscillator port integrated resonator for Rydberg atom-based electric field measurement enhancement

Bo Wu, Dunwei Liao, Zhenke Ding +5 more

Abstract Rydberg atom-based superheterodyne with additional local oscillator (LO) signal is a novel approach to detect electric field with high measured sensitivity. However, the LO signal is often supplied to the atomic vapor cell by free-space illumination, which lacks mobility and integration for practical applications. Here, we present a LO port integrated split-ring resonator for realizing high sensitivity-enhanced electric field measurements. The LO signal is sent directly to the resonator through a parallel-plate waveguide, which is shown to achieve a sensitivity enhancement of 32 dB. The integrated resonator has an electrical size of 0.088λ and the feed port S11 reaches −38.2 dB.

EPJ Quantum Technology•Mar 22, 2024•16 citations

PCB-Based Electrically Tunable Resonator for VHF Band Rydberg Atomic Enhancement Sensing

Kai Yang, Xiaozhang Chen, Ruiqi Mao +2 more

Highly sensitive detection of VHF band fields poses a challenge for Rydberg atomic sensing since resonant detection requires exciting atoms to extremely high energy states. We demonstrate a PCB-based electrically tunable resonator (PETR) for enhancing the sensing sensitivity of the Rydberg atomic sensor to VHF band fields. In this approach, the sub-wavelength PETR is made of PCB, which offers improved mechanical strength and miniaturization. During the measurements, a parallel-plate waveguide is utilized as the radio frequency (RF) fields launcher to eliminate unintentional scattering from the surroundings. By adjusting the bias voltage applied to the tuning varactor of the PETR, we can continuously tune the resonant frequencies from 187 MHz to 293.6 MHz, corresponding to a relative bandwidth of 44%. There is a fluctuation in the enhancement factor of the PETR, ranging from 17.6 to 60.1, which is primarily caused by misalignment between the laser beam and the resonant area. Furthermore, employing the off-resonant Rydberg atomic heterodyne technique, we investigated the sensitivity of the system. In the absence of the PETR, the sensitivity for a RF signal at 250.5 MHz was found to be 24.36 μV/cm√Hz. However, with the presence of our PETR, the sensitivity significantly improved to 433.26 nV/cm√Hz, indicating a remarkable enhancement capacity of 56.23 times or 35 dB. This enhancement resonator holds great potential for improving Rydberg atomic sensing, particularly in the VHF band.

IEEE Transactions on Antennas and Propagation•Apr 16, 2024•24 citations

A Compact Tunable Enhancement Resonator for Rydberg Atomic Receiver

Yuxiao Li, Yi Lin, Zhenke Ding +4 more

Rydberg atomic receivers (RARs) have emerged in the field of quantum precision measurement due to high sensitivity and self-calibration. In this letter, we demonstrate a compact tunable enhancement resonator (CTER) for enhancing the detective sensitivity of the RAR. The resonator consists of two printed circuit board (PCB) substrates and a copper tuning column, which achieves resonant frequency variation by continuously sliding the copper tuning column. During the measurement, we have achieved electric field enhancement in the 210 MHz to 308.6 MHz band with a relative bandwidth of 38$\%$and the enhancement factor ranging from 38 dB to 47 dB. By adjusting the height of the CTER, different sizes of atomic vapor cells can be accommodated while maintaining good enhancement. In theoff-resonant region, the detective sensitivity of the RAR with and without CTER at 223.7 MHz were measured at 179.37 nV$\cdot {\text{cm}}^{-1}$$ \cdot {\text{Hz}}^{-1/2}$and 40.16$\mu$V$\cdot$$\text{cm}^{-1}$$ \cdot {\text{Hz}}^{-1/2}$by utilizing the Rydberg atomic heterodyne technique, respectively. Furthermore, the CTER displays a compact electrical size, approximately 3.37× 10$^{-5}$$\lambda ^{3}$in comparison to other resonators, which facilitates the miniaturization and integration of the RAR. Its remarkable resonance characteristics and broadband tuning capability provide support for achieving high-sensitivity and broadband quantum microwave measurements.

IEEE Antennas and Wireless Propagation Letters•Dec 16, 2024•11 citations

High-Sensitivity Rydberg Atom-Based Field Sensing Enhancement Using Miniaturized Resonator

Aojie Zhou, Yi Lin, Ruiqi Mao +4 more

High-sensitivity amplitude and frequency detection of microwave electric fields is of significant importance in various fields, including communications, microwave quantum technology, aerospace, medicine, and meteorology. Rydberg atom-based sensors promise traceable standards and high sensitivity for detecting weak electric fields and enhancing sensing sensitivity, mainly by using superheterodyne technology and resonant structures. Detecting high-frequency (HF) band fields with high sensitivity using Rydberg atom sensors is a significant challenge due to the requirement of exciting atoms to extremely high energy states for resonant detection. We demonstrate the off-resonant Rydberg atomic superheterodyne architecture with additional resonators for greatly enhancing the sensing sensitivity to HF band fields. In this approach, we propose a miniaturized square spiral resonator with an electrical size of$0.011~\lambda $at 15.54 MHz. To reduce the electric-field-screening effect of the adsorption of alkali metal atoms, we use a monocrystalline sapphire cesium (Cs) vapor cell. By utilizing the off-resonant alternating current (ac) Stark effect, the initial sensitivity of the Rydberg atom sensor without the resonator is measured to be$10.39~\mu \text {V/cm}\sqrt {\text {Hz}}$at room temperature. With the addition of the miniaturized square spiral resonator, the sensitivity significantly improved to$2.60~\text {nV/cm}\sqrt {\text {Hz}}$, which has been inaccessible so far with atomic sensors. Here, we provide an enhancement of 72 dB, which is three orders of magnitude improvement in sensitivity than when the resonator is not used. This enhancement resonator extends Rydberg atomic high-sensitivity sensing to the HF band and shows great potential, especially in shortwave radio reception.

IEEE Transactions on Antennas and Propagation•Aug 13, 2025•9 citations

Rydberg atom-based field sensing enhancement using a split-ring resonator

Christopher L. Holloway, Nikunjkumar Prajapati, Alexandra B. Artusio‐Glimpse +5 more

We investigate the use of a split-ring resonator (SRR) incorporated with an atomic-vapor cell to improve the sensitivity and the minimal detectable electric (E) field of Rydberg atom-based sensors. In this approach, a sub-wavelength SRR is placed around an atomic vapor-cell filled with cesium atoms for E-field measurements at 1.3 GHz. The SRR provides a factor of 100 in the enhancement of the E-field measurement sensitivity. Using electromagnetically induced transparency (EIT) with Aulter–Townes splitting, E-field measurements down to 5 mV/m are demonstrated with the SRR, while in the absence of the SRR, the minimal detectable field is 500 mV/m. We demonstrate that by combining EIT with a heterodyne Rydberg atom-based mixer approach, the SRR allows for a sensitivity of 5.5 μV/mHz, which is two-orders of magnitude improvement in sensitivity than when the SRR is not used.

arXiv:2202.08954•Applied Physics Letters•May 16, 2022•96 citations
The Rydberg atomic heterodyne technique and resonant structures represent two prominent approaches that can notably enhance the sensing sensitivity of Rydberg atomic receivers in the atomic and microwave domains, respectively. However, current implementations exhibit low levels of integration, particularly in the VHF band. This article introduces local oscillator (LO) port-integrated resonators (LOIRs) to synergize these methods, aiming to improve sensitivity and system integration in Rydberg atom-based receivers. Through an analysis of the electric field distribution in the split-ring resonator (SRR), we developed two types of LOIRs: the standing wave type LOIR (SIR) and the traveling wave type LOIR (TIR). Experimental investigations were conducted at 264 MHz using a vapor cell containing cesium atoms in the resonators. Spectral measurements indicate that the SIR and TIR provide enhancement factors of 45.8 and 45.3 dB, respectively. When employing the SIR and TIR for Rydberg atomic heterodyning, sensitivity significantly improved to 104.34 and 105.54 (nV/cm)/Hz\sqrt {\text {Hz}}Hz​, respectively. Furthermore, in comparison to the SRR setup in the atomic heterodyne scenario, the LO power consumption decreased to 22.4% and 3.7% with the SIR and TIR, respectively. This research represents a significant advancement toward the practical application of Rydberg atomic receivers.
Abstract Rydberg atom-based sensors using the atomic heterodyne technique demonstrate prominent performance on sensing sensitivity and thus have significant potential for radar, electronic reconnaissance, and communication applications. Here, we propose a local oscillator (LO) embedded field enhancement resonator to improve the sensitivity and integration of Rydberg atomic heterodyne sensors. In this approach, a vapor cell filled with cesium atoms is placed into the resonance structure for electric (E) field measurements. By integrating parallel-plate waveguide (PPWG) antennas and the resonator, the LO signal can be directly guided to the resonator using coaxial cable instead of the use of external antennas radiating through free space, allowing for a more flexible and practical Rydberg atom-based heterodyne technique. Based on the off-resonant Rydberg atomic heterodyne approach, for a radio frequency (RF) signal at 638 MHz, it is found that the sensitivity is 43 μ V/cm Hz\sqrt{\text{Hz}}Hz​ Hz in the absence of the resonator, while in the presence of our resonator, the sensitivity is down to 854.36 nV/cm Hz\sqrt{\text{Hz}}Hz​ Hz , indicating 50 times or 34 dB improvement capacity of the proposed resonator. This type of enhancement resonator is expected to benefit Rydberg atomic heterodyne applications in practical environments.
Abstract Rydberg atom-based superheterodyne with additional local oscillator (LO) signal is a novel approach to detect electric field with high measured sensitivity. However, the LO signal is often supplied to the atomic vapor cell by free-space illumination, which lacks mobility and integration for practical applications. Here, we present a LO port integrated split-ring resonator for realizing high sensitivity-enhanced electric field measurements. The LO signal is sent directly to the resonator through a parallel-plate waveguide, which is shown to achieve a sensitivity enhancement of 32 dB. The integrated resonator has an electrical size of 0.088λ and the feed port S11 reaches −38.2 dB.
Highly sensitive detection of VHF band fields poses a challenge for Rydberg atomic sensing since resonant detection requires exciting atoms to extremely high energy states. We demonstrate a PCB-based electrically tunable resonator (PETR) for enhancing the sensing sensitivity of the Rydberg atomic sensor to VHF band fields. In this approach, the sub-wavelength PETR is made of PCB, which offers improved mechanical strength and miniaturization. During the measurements, a parallel-plate waveguide is utilized as the radio frequency (RF) fields launcher to eliminate unintentional scattering from the surroundings. By adjusting the bias voltage applied to the tuning varactor of the PETR, we can continuously tune the resonant frequencies from 187 MHz to 293.6 MHz, corresponding to a relative bandwidth of 44%. There is a fluctuation in the enhancement factor of the PETR, ranging from 17.6 to 60.1, which is primarily caused by misalignment between the laser beam and the resonant area. Furthermore, employing the off-resonant Rydberg atomic heterodyne technique, we investigated the sensitivity of the system. In the absence of the PETR, the sensitivity for a RF signal at 250.5 MHz was found to be 24.36 μV/cm√Hz. However, with the presence of our PETR, the sensitivity significantly improved to 433.26 nV/cm√Hz, indicating a remarkable enhancement capacity of 56.23 times or 35 dB. This enhancement resonator holds great potential for improving Rydberg atomic sensing, particularly in the VHF band.
Rydberg atomic receivers (RARs) have emerged in the field of quantum precision measurement due to high sensitivity and self-calibration. In this letter, we demonstrate a compact tunable enhancement resonator (CTER) for enhancing the detective sensitivity of the RAR. The resonator consists of two printed circuit board (PCB) substrates and a copper tuning column, which achieves resonant frequency variation by continuously sliding the copper tuning column. During the measurement, we have achieved electric field enhancement in the 210 MHz to 308.6 MHz band with a relative bandwidth of 38%\%%and the enhancement factor ranging from 38 dB to 47 dB. By adjusting the height of the CTER, different sizes of atomic vapor cells can be accommodated while maintaining good enhancement. In theoff-resonant region, the detective sensitivity of the RAR with and without CTER at 223.7 MHz were measured at 179.37 nV⋅cm−1\cdot {\text{cm}}^{-1}⋅cm−1$ \cdot {\text{Hz}}^{-1/2}and40.16and 40.16and40.16\muVVV\cdotcm−1\text{cm}^{-1}cm−1 \cdot {\text{Hz}}^{-1/2}byutilizingtheRydbergatomicheterodynetechnique,respectively.Furthermore,theCTERdisplaysacompactelectricalsize,approximately3.37×10by utilizing the Rydberg atomic heterodyne technique, respectively. Furthermore, the CTER displays a compact electrical size, approximately 3.37× 10byutilizingtheRydbergatomicheterodynetechnique,respectively.Furthermore,theCTERdisplaysacompactelectricalsize,approximately3.37×10^{-5}$λ3\lambda ^{3}λ3in comparison to other resonators, which facilitates the miniaturization and integration of the RAR. Its remarkable resonance characteristics and broadband tuning capability provide support for achieving high-sensitivity and broadband quantum microwave measurements.
High-sensitivity amplitude and frequency detection of microwave electric fields is of significant importance in various fields, including communications, microwave quantum technology, aerospace, medicine, and meteorology. Rydberg atom-based sensors promise traceable standards and high sensitivity for detecting weak electric fields and enhancing sensing sensitivity, mainly by using superheterodyne technology and resonant structures. Detecting high-frequency (HF) band fields with high sensitivity using Rydberg atom sensors is a significant challenge due to the requirement of exciting atoms to extremely high energy states for resonant detection. We demonstrate the off-resonant Rydberg atomic superheterodyne architecture with additional resonators for greatly enhancing the sensing sensitivity to HF band fields. In this approach, we propose a miniaturized square spiral resonator with an electrical size of$0.011~\lambda $at 15.54 MHz. To reduce the electric-field-screening effect of the adsorption of alkali metal atoms, we use a monocrystalline sapphire cesium (Cs) vapor cell. By utilizing the off-resonant alternating current (ac) Stark effect, the initial sensitivity of the Rydberg atom sensor without the resonator is measured to be10.39 μV/cmHz10.39~\mu \text {V/cm}\sqrt {\text {Hz}}10.39 μV/cmHz​at room temperature. With the addition of the miniaturized square spiral resonator, the sensitivity significantly improved to2.60 nV/cmHz2.60~\text {nV/cm}\sqrt {\text {Hz}}2.60 nV/cmHz​, which has been inaccessible so far with atomic sensors. Here, we provide an enhancement of 72 dB, which is three orders of magnitude improvement in sensitivity than when the resonator is not used. This enhancement resonator extends Rydberg atomic high-sensitivity sensing to the HF band and shows great potential, especially in shortwave radio reception.
We investigate the use of a split-ring resonator (SRR) incorporated with an atomic-vapor cell to improve the sensitivity and the minimal detectable electric (E) field of Rydberg atom-based sensors. In this approach, a sub-wavelength SRR is placed around an atomic vapor-cell filled with cesium atoms for E-field measurements at 1.3 GHz. The SRR provides a factor of 100 in the enhancement of the E-field measurement sensitivity. Using electromagnetically induced transparency (EIT) with Aulter–Townes splitting, E-field measurements down to 5 mV/m are demonstrated with the SRR, while in the absence of the SRR, the minimal detectable field is 500 mV/m. We demonstrate that by combining EIT with a heterodyne Rydberg atom-based mixer approach, the SRR allows for a sensitivity of 5.5 μV/mHz, which is two-orders of magnitude improvement in sensitivity than when the SRR is not used.