Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Optics

Impact of light-induced atomic desorption on electric field sensing via electromagnetically induced transparency and its correction

Dongping Xiao, Wenyu Lin, Sheng Yan, Xutao Wei, Huaiqing Zhang

Published Jan 3, 2025• 1 citation
Publisher

Abstract

In Rydberg quantum electric field sensing, the amplitude and linewidth of electromagnetically induced transparency (EIT) spectra significantly impact the accuracy of electric field measurements. This paper discusses the influence of atomic density on the amplitude and linewidth of EIT spectra in a vapor cell within a three-level ladder system driven by two-photon excitation. Due to the adsorption of alkali metal atoms on the inner surface of the vapor cell, the study utilizes light-induced atomic desorption effects to regulate the atomic density using LED light. This approach, combined with probe and coupling lasers, results in the formation of high-amplitude, low-linewidth EIT spectra. Based on the Rydberg atom sensing measurement system constructed in this study, when the number of atoms per cubic meter is less than 1.5×10 24 , a decrease in the optical depth at the bottom of the EIT leads to a reduction in amplitude and an increase in linewidth. When the number of atoms per cubic meter exceeds 4×10 24 , a decrease in the peak value at the top of the EIT results in a reduction in amplitude, with a slight decrease in linewidth. By adjusting the atomic density within the vapor cell through the power of desorption light and optimizing the laser Rabi frequency parameters, the atomic number density is maintained between 1.5×10 24 and 4×10 24 per cubic meter, yielding high-amplitude, low-linewidth EIT spectra. Additionally, the influence of introducing 365 nm desorption light on the accuracy of the constructed electric field measurement system is analyzed and corrected.

DOI
10.1364/ao.542367

Related papers

Low-frequency weak electric field measurement based on Rydberg atoms using cavity-enhanced three photon system

Dongping Xiao, Zhuxin Shi, Lin Chen +3 more

Introduction: Rydberg atoms are ideal for measuring electric fields due to their unique physical properties. However, low-frequency electric fields below MHz can be challenging due to the accumulation of ionized free electrons on the atomic vapor cell’s surface, acting as a shield. Method: This paper proposes a Cavity-enhanced three-photon system (CETPS) measurement scheme, which uses a long-wavelength laser to excite the Rydberg state, reducing atomic ionization and enhancing detection spectrum resolution. A theoretical model is proposed to explain the quantum coherence effect of the light field, measured electric field, and the atomic system. Result: The results show that the proposed scheme significantly increases the electromagnetically induced transparency (EIT) spectral peak and narrows the spectral width, resulting in the maximum slope increasing by more than an order of magnitude. Discussion: The paper also discusses the impact of the Rabi frequency of the two laser fields and the coupling coefficient of the optical cavity on the transmission spectrum amplitude and linewidth, along with the optimal configuration of these parameters in the CEPTS scheme.

Frontiers in Physics•Jun 17, 2024•7 citations

Analysis of the spectral characteristics and influencing factors of Rydberg atom EIT

Fu-Li Yang, Yingying Cheng

High-precision Rydberg atom EIT spectroscopy has significant application value in studying the interactions between Rydberg atoms, the energy level structure of Rydberg atoms, and the precise measurement of electric fields. Therefore, it is of great importance to study the parameters influencing atomic EIT spectroscopy. In this paper, a theoretical model for the generation of a two-photon three-level EIT spectrum is established, and the influence of the coupling light's Rabi frequency and corresponding power on the EIT spectrum is theoretically explored. The changes in the EIT spectrum's amplitude and FWHM caused by variations in the coupling light power are experimentally verified. Furthermore, the effect of the overlap between the probe light and the coupling light in the atomic vapor cell on the EIT spectrum is investigated. The results show that as the laser power increases, the amplitude of the EIT spectrum first increases and then decreases, while the FWHM increases. The optimal coupling light laser power of 35 mW is determined using the quality factor. A decrease in the overlap of the two lasers leads to a reduction in the EIT spectrum's amplitude. This study provides a reference for selecting coupling light parameters and improving the accuracy of electric field measurements using Rydberg atoms.

International Conference on Electrical Engineering and Smart Grid (EESG)•Dec 5, 2025•0 citations

Spectral characteristics of Floquet-electromagnetically induced transparency dressed by radio frequency field in a direct current electric field

Haonan DUAN, Zhonghua JI, Weixin Liu +3 more

A Rydberg atom is a special type of atom characterized by a high principal quantum number. Electric field sensors based on Rydberg atoms have received widespread attention due to their high polarizability. However, there is currently little research on the use of Rydberg atoms for direct current (DC) or low-frequency electric fields, mainly due to the shielding effect of atomic vapor cells in low-frequency electric fields, which makes accurate measurement of the electric fields extremely challenging. In this paper, we construct a Rydberg ladder configuration by using probe laser at 852 nm and coupling laser at 510 nm in a room-temperature cesium vapor cell with integrated electrode plates, thereby enabling the realizing of a Floquet-EIT (electromagnetically induced transparency) spectrum dressed by a radio frequency (RF) field in the presence of a DC electric field. We further study the influence of DC electric field on spectral characteristic. Experimentally, it is observed that when only the RF electric field is applied, the EIT spectrum displays solely even-order sidebands. Furthermore, when both the RF field and the DC electric field are simultaneously present, the first-order sideband signal of the Floquet-EIT is observed. As the intensity of the DC electric field increases, the amplitude of the first-order sideband gradually increases. However, increasing the DC electric field to a sufficient magnitude induces sideband interference, which leads the sideband amplitudes to decrease. Furthermore, increasing the RF frequency can alleviate the interference effects induced by the DC electric field on the first-order sideband. Finally, comparing the relative standard deviation of the sideband amplitudes of the Floquet-EIT spectra with the frequency shifts of the DC-Stark spectra under weak DC electric fields, we find that the measurement accuracy of the former is significantly superior to that of the latter. This work makes use of a Cs atomic vapor cell with an integrated electrode to avoid shielding effects. By observing Floquet-EIT spectra, the response of the spectra to DC electric fields is investigated. This experiment provides novel insights into the quantum sensing measurements of DC and low-frequency electric fields.

Acta Physica Sinica•Jan 1, 2025•0 citations

Electric field sensing via Rydberg electromagnetically induced transparency using Zeeman and Stark effects

Y. C. Chen, Shao-Cheng Fang, Hsuan-Jui Su +1 more

Rydberg-assisted atomic electrometry with thermal vapors offers a promising approach for detecting external electric fields. However, this technique presents significant challenges for measuring low frequencies due to the effects of metal-alkali atoms adsorbed on the interior surface of the vacuum chamber. In this work, we apply high-contrast Rydberg electromagnetically induced transparency (EIT) spectroscopy to systematically investigate these effects, including the influence of laser power and electric field strength. We demonstrate the ability to measure electric field frequencies ranging from 10 Hz to 1 MHz. Additionally, this study identifies a fundamental limit for data capacity in such measurements. Furthermore, we propose a method for precise Stark shift measurements by locking the coupling laser to Zeeman-split Rydberg EIT peaks. Using the Zeeman shift in a reference cell as a stable frequency reference, we are able to track Stark-induced shifts in a science cell and confirm excellent agreement with theoretical predictions. These results provide valuable insights for future precision measurement techniques and field sensing applications based on Rydberg atom systems.

arXiv:2402.01430•Journal of Applied Physics•Sep 2, 2025•1 citation

Electromagnetically induced transparency spectra of cesium Rydberg atoms decorated by radio-frequency fields

Yulong Han, Bang Liu, Kan Zhang +3 more

The large electric dipole moment of the Rydberg atom allows for strong coupling with weak electric fields, and is widely used in electric field measurements because of its reproducibility, precision and stability. The combination of Rydberg atoms and electromagnetically induced transparency (EIT) technology has been used for detecting and characterizing radio-frequency (RF) electric fields. In this work, by selecting probe light (852 nm), dressed light (1470 nm), and coupled light (780 nm), the Rydberg state (49P3/2) of Cs atom is prepared by using a three-photon excitation scheme through using all-infrared light excitation of Rydberg atoms. We experimentally observe the EIT spectra of the Rydberg states decorated by radio-frequency electric fields, which optically detects Rydberg atoms. The effect of the amplitude and frequency of the RF electric field on the spectrum is explored in light of changes in the EIT spectrum. The results show that in the region of weak electric field, only the ac Stark energy shift and spectral broadening occur. As the electric field is further enhanced, the sideband phenomenon occurs in both the primary peak and secondary peak of the EIT. In the region of strong field, the Rydberg energy level produces a series of Floquet states with higher-order terms, as well as state shifting and mixing, resulting in asymmetry in the spectra of the EIT sideband peaks. The effect of frequency on the shielding effect of the Cs vapor cell is further discussed based on the shift of the main peak of the EIT. The demodulation of the electric field in a range of 50 Hz–1 kHz with a fidelity of 95% is achieved by modulating the low-frequency electric field to the RF electric field. The results can provide valuable references for spectral detection and traceable measurements of low-frequency electric fields.

Acta Physica Sinica•Jan 1, 2024•1 citation

High sensitivity spectroscopy of cesium Rydberg atoms using electromagnetically induced transparency

Jianming Zhao, Xingbo Zhu, Linjie Zhang +3 more

A high sensitivity spectroscopy of Rydberg atoms is presented by using electromagnetically induced transparency (EIT) in the 6S(1/2)-6P(3/2)-n D ladder-type system of cesium vapor cell at room temperature. The EIT spectra of 40 D Rydberg state are measured and the dependences of the EIT magnitude and linewidth on the coupling laser power are investigated in detail. The Rydberg EIT linewidth is measured to be about 5.6 MHz when the powers of probe and coupling lasers are 50 microW and 5.2 mW, respectively, and which is close to the natural linewidth of cesium atoms. The effect of double resonance optical pumping on EIT is also investigated. The fine structures of nD (n = 39-55) are measured and the experimental result is in agreement with quantum defect theory.

Optics Express•Aug 21, 2009•39 citations
In Rydberg quantum electric field sensing, the amplitude and linewidth of electromagnetically induced transparency (EIT) spectra significantly impact the accuracy of electric field measurements. This paper discusses the influence of atomic density on the amplitude and linewidth of EIT spectra in a vapor cell within a three-level ladder system driven by two-photon excitation. Due to the adsorption of alkali metal atoms on the inner surface of the vapor cell, the study utilizes light-induced atomic desorption effects to regulate the atomic density using LED light. This approach, combined with probe and coupling lasers, results in the formation of high-amplitude, low-linewidth EIT spectra. Based on the Rydberg atom sensing measurement system constructed in this study, when the number of atoms per cubic meter is less than 1.5×10 24 , a decrease in the optical depth at the bottom of the EIT leads to a reduction in amplitude and an increase in linewidth. When the number of atoms per cubic meter exceeds 4×10 24 , a decrease in the peak value at the top of the EIT results in a reduction in amplitude, with a slight decrease in linewidth. By adjusting the atomic density within the vapor cell through the power of desorption light and optimizing the laser Rabi frequency parameters, the atomic number density is maintained between 1.5×10 24 and 4×10 24 per cubic meter, yielding high-amplitude, low-linewidth EIT spectra. Additionally, the influence of introducing 365 nm desorption light on the accuracy of the constructed electric field measurement system is analyzed and corrected.
Introduction: Rydberg atoms are ideal for measuring electric fields due to their unique physical properties. However, low-frequency electric fields below MHz can be challenging due to the accumulation of ionized free electrons on the atomic vapor cell’s surface, acting as a shield. Method: This paper proposes a Cavity-enhanced three-photon system (CETPS) measurement scheme, which uses a long-wavelength laser to excite the Rydberg state, reducing atomic ionization and enhancing detection spectrum resolution. A theoretical model is proposed to explain the quantum coherence effect of the light field, measured electric field, and the atomic system. Result: The results show that the proposed scheme significantly increases the electromagnetically induced transparency (EIT) spectral peak and narrows the spectral width, resulting in the maximum slope increasing by more than an order of magnitude. Discussion: The paper also discusses the impact of the Rabi frequency of the two laser fields and the coupling coefficient of the optical cavity on the transmission spectrum amplitude and linewidth, along with the optimal configuration of these parameters in the CEPTS scheme.
High-precision Rydberg atom EIT spectroscopy has significant application value in studying the interactions between Rydberg atoms, the energy level structure of Rydberg atoms, and the precise measurement of electric fields. Therefore, it is of great importance to study the parameters influencing atomic EIT spectroscopy. In this paper, a theoretical model for the generation of a two-photon three-level EIT spectrum is established, and the influence of the coupling light's Rabi frequency and corresponding power on the EIT spectrum is theoretically explored. The changes in the EIT spectrum's amplitude and FWHM caused by variations in the coupling light power are experimentally verified. Furthermore, the effect of the overlap between the probe light and the coupling light in the atomic vapor cell on the EIT spectrum is investigated. The results show that as the laser power increases, the amplitude of the EIT spectrum first increases and then decreases, while the FWHM increases. The optimal coupling light laser power of 35 mW is determined using the quality factor. A decrease in the overlap of the two lasers leads to a reduction in the EIT spectrum's amplitude. This study provides a reference for selecting coupling light parameters and improving the accuracy of electric field measurements using Rydberg atoms.
A Rydberg atom is a special type of atom characterized by a high principal quantum number. Electric field sensors based on Rydberg atoms have received widespread attention due to their high polarizability. However, there is currently little research on the use of Rydberg atoms for direct current (DC) or low-frequency electric fields, mainly due to the shielding effect of atomic vapor cells in low-frequency electric fields, which makes accurate measurement of the electric fields extremely challenging. In this paper, we construct a Rydberg ladder configuration by using probe laser at 852 nm and coupling laser at 510 nm in a room-temperature cesium vapor cell with integrated electrode plates, thereby enabling the realizing of a Floquet-EIT (electromagnetically induced transparency) spectrum dressed by a radio frequency (RF) field in the presence of a DC electric field. We further study the influence of DC electric field on spectral characteristic. Experimentally, it is observed that when only the RF electric field is applied, the EIT spectrum displays solely even-order sidebands. Furthermore, when both the RF field and the DC electric field are simultaneously present, the first-order sideband signal of the Floquet-EIT is observed. As the intensity of the DC electric field increases, the amplitude of the first-order sideband gradually increases. However, increasing the DC electric field to a sufficient magnitude induces sideband interference, which leads the sideband amplitudes to decrease. Furthermore, increasing the RF frequency can alleviate the interference effects induced by the DC electric field on the first-order sideband. Finally, comparing the relative standard deviation of the sideband amplitudes of the Floquet-EIT spectra with the frequency shifts of the DC-Stark spectra under weak DC electric fields, we find that the measurement accuracy of the former is significantly superior to that of the latter. This work makes use of a Cs atomic vapor cell with an integrated electrode to avoid shielding effects. By observing Floquet-EIT spectra, the response of the spectra to DC electric fields is investigated. This experiment provides novel insights into the quantum sensing measurements of DC and low-frequency electric fields.
Rydberg-assisted atomic electrometry with thermal vapors offers a promising approach for detecting external electric fields. However, this technique presents significant challenges for measuring low frequencies due to the effects of metal-alkali atoms adsorbed on the interior surface of the vacuum chamber. In this work, we apply high-contrast Rydberg electromagnetically induced transparency (EIT) spectroscopy to systematically investigate these effects, including the influence of laser power and electric field strength. We demonstrate the ability to measure electric field frequencies ranging from 10 Hz to 1 MHz. Additionally, this study identifies a fundamental limit for data capacity in such measurements. Furthermore, we propose a method for precise Stark shift measurements by locking the coupling laser to Zeeman-split Rydberg EIT peaks. Using the Zeeman shift in a reference cell as a stable frequency reference, we are able to track Stark-induced shifts in a science cell and confirm excellent agreement with theoretical predictions. These results provide valuable insights for future precision measurement techniques and field sensing applications based on Rydberg atom systems.
The large electric dipole moment of the Rydberg atom allows for strong coupling with weak electric fields, and is widely used in electric field measurements because of its reproducibility, precision and stability. The combination of Rydberg atoms and electromagnetically induced transparency (EIT) technology has been used for detecting and characterizing radio-frequency (RF) electric fields. In this work, by selecting probe light (852 nm), dressed light (1470 nm), and coupled light (780 nm), the Rydberg state (49P3/2) of Cs atom is prepared by using a three-photon excitation scheme through using all-infrared light excitation of Rydberg atoms. We experimentally observe the EIT spectra of the Rydberg states decorated by radio-frequency electric fields, which optically detects Rydberg atoms. The effect of the amplitude and frequency of the RF electric field on the spectrum is explored in light of changes in the EIT spectrum. The results show that in the region of weak electric field, only the ac Stark energy shift and spectral broadening occur. As the electric field is further enhanced, the sideband phenomenon occurs in both the primary peak and secondary peak of the EIT. In the region of strong field, the Rydberg energy level produces a series of Floquet states with higher-order terms, as well as state shifting and mixing, resulting in asymmetry in the spectra of the EIT sideband peaks. The effect of frequency on the shielding effect of the Cs vapor cell is further discussed based on the shift of the main peak of the EIT. The demodulation of the electric field in a range of 50 Hz–1 kHz with a fidelity of 95% is achieved by modulating the low-frequency electric field to the RF electric field. The results can provide valuable references for spectral detection and traceable measurements of low-frequency electric fields.
A high sensitivity spectroscopy of Rydberg atoms is presented by using electromagnetically induced transparency (EIT) in the 6S(1/2)-6P(3/2)-n D ladder-type system of cesium vapor cell at room temperature. The EIT spectra of 40 D Rydberg state are measured and the dependences of the EIT magnitude and linewidth on the coupling laser power are investigated in detail. The Rydberg EIT linewidth is measured to be about 5.6 MHz when the powers of probe and coupling lasers are 50 microW and 5.2 mW, respectively, and which is close to the natural linewidth of cesium atoms. The effect of double resonance optical pumping on EIT is also investigated. The fine structures of nD (n = 39-55) are measured and the experimental result is in agreement with quantum defect theory.