Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

The Journal of Physical Chemistry A

Vibronic Structure of the UV/Visible Absorption Spectra of Phenol and Phenolate: A Hybrid Density Functional Theory─Doktorov’s Quantum Algorithm Approach

Renato Olarte Hernandez, Armand Soldera, Benoît R. Champagne

Published Dec 24, 2024• 4 citations
Publisher

Abstract

The Doktorov’s quantum algorithm has been enacted in combination with time-dependent density functional theory (TD-DFT) to simulate the vibronic structure of the UV/visible absorption spectra of the phenol and phenolate molecules. On the one hand, DFT and TD-DFT are employed with classical algorithms to calculate the ground and excited-state electronic structures as well as their vibrational frequencies and normal modes, whereas, on the other hand, quantum algorithms are employed for evaluating the vibrational transition intensities. In comparison to a previous study, J. Phys. Chem. A 2024, 128, 4369–4377, which demonstrated Doktorov’s quantum algorithm as a proof of concept to predict the vibronic structure of ionization spectra, it is applied here to medium-size molecules with more than 30 vibrational normal modes, without accounting for Duschinsky rotations due to software limitations. This application to simulate the vibronic structures of the spectra of phenol and phenolate also enables assessing the impact of the differences in vibrational frequencies between the ground and excited electronic states.

DOI
10.1021/acs.jpca.4c06960

Related papers

Simulating Vibronic Spectra by Direct Application of Doktorov Formulas on a Superconducting Quantum Simulator

Renato Olarte Hernandez, Benoît R. Champagne, Armand Soldera

In this work, a direct quantum implementation of the Doktorov formulas for calculating the vibronic spectrum of molecules under the harmonic approximation is presented. It is applied to the three-atom molecules H 2 O, SO 2, ClO 2, HS 2, and ZnOH. The method solves the classically hard problem of estimating the Franck–Condon (FC) factors by using the Duschinsky matrices as the only input via the Doktorov quantum circuit. This has the advantage of avoiding basis changes, artificial squeezing parameters, and symmetry dependencies. In other words, it is a general method for three-atom molecules that can easily be generalized to bigger molecules. The results are compared with other quantum algorithms and classical anharmonic algorithms. Furthermore, the circuit requirements are studied in order to estimate its applicability on real superconducting quantum hardware.

The Journal of Physical Chemistry A•May 16, 2024•6 citations

Quantum HF/DFT-embedding algorithms for electronic structure calculations: Scaling up to complex molecular systems

Max Rossmannek, Panagiotis Kl. Barkoutsos, Pauline J. Ollitrault +1 more

In the near future, material and drug design may be aided by quantum computer assisted simulations. These have the potential to target chemical systems intractable by the most powerful classical computers. However, the resources offered by contemporary quantum computers are still limited, restricting the simulations to very simple molecules. In order to rapidly scale up to more interesting molecular systems, we propose the embedding of the quantum electronic structure calculation into a classically computed environment obtained at the Hartree-Fock (HF) or density functional theory (DFT) level of theory. This result is achieved by constructing an effective Hamiltonian that incorporates a mean field potential describing the action of the inactive electrons on a selected Active Space (AS). The ground state of the AS Hamiltonian is then determined by means of the variational quantum eigensolver algorithm. We show that with the proposed HF and DFT embedding schemes, we can obtain significant energy corrections to the reference HF and DFT calculations for a number of simple molecules in their strongly correlated limit (the dissociation regime) as well as for systems of the size of the oxirane molecule.

arXiv:2009.01872•The Journal of Chemical Physics•Mar 15, 2021•74 citations

A Quantum Information Approach to Ultrafast Spectroscopy

Joel Y. Yuen-Zhou

In the first part of the dissertation, we develop a theoretical approach to analyze nonlinear spectroscopy experiments based on the formalism of quantum state (QST) and process tomography (QPT). In it, a quantum system is regarded as a black box which can be systematically tested in its performance, very much like an electric circuit is tested by sending a series of inputs and measuring the corresponding outputs, but in the quantum sense. We show how to collect a series of pump-probe or photon-echo experiments, and by varying polarizations and frequency components of the perturbations, reconstruct the quantum state (density matrix) of the probed system for a set of different initial conditions, hence simultaneously achieving QST and QPT. Furthermore, we establish the conditions under which a set of two-dimensional optical spectra also yield the desired results. Simulations of noisy experiments with inhomogeneous broadening show the feasibility of the protocol. A spin-off of this work is our suggestion of a witness that distinguishes between spectroscopic time-oscillations corresponding to vibronic only coherences against their electronic counterparts. We conclude by noting that the QST/QPT approach to nonlinear spectroscopy sheds light on the amount of quantum information contained in the output of an experiment, and hence, is a convenient theoretical and experimental paradigm even when the goal is not to perform a full QPT. In the second part of the thesis, we discuss a methodology to study the electronic dynamics of complex molecular systems, such as photosynthetic units, in the framework of time-dependent density functional theory (TD-DFT). By treating the electronic degrees of freedom as the system and the nuclear ones as the bath, we develop an open quantum systems (OQS) approach to TD-DFT. We formally extend the theoretical backbone of TD-DFT to OQS, and suggest a Markovian bath functional which can be readily included in electronic structure codes.

•Feb 7, 2013•0 citations

Quantum algorithm for simulating molecular vibrational excitations

Soran Jahangiri, Juan Miguel Arrazola, Nicolás Quesada +1 more

The excitation of vibrational modes in molecules affects the outcome of chemical reactions, for example by providing molecules with sufficient energy to overcome activation barriers. In this work, we introduce a quantum algorithm for simulating molecular vibrational excitations during vibronic transitions. We discuss how a special-purpose quantum computer can be programmed with molecular data to optimize a vibronic process such that desired modes get excited during the transition. We investigate the effect of such excitations on selective bond dissociation in pyrrole and butane during photochemical and mechanochemical vibronic transitions. The results are discussed with respect to experimental observations and classical simulations. We also introduce quantum-inspired classical algorithms for simulating molecular vibrational excitations in special cases where only a limited number of modes are of interest.

arXiv:2006.13339•Physical Chemistry Chemical Physics•Jan 1, 2020•34 citations

Hybrid HPC-Quantum Simulations: DFT-Quantum Embedding for Molecular Systems

Namrata Manglani, Samrit Maity, Shashank Sharma +4 more

Scientific simulations demand methods combining scalability with predictive accuracy. Density Functional Theory (DFT) on High-Performance Computing (HPC) enables large-scale electronic-structure simulations but is limited by approximations affecting strongly correlated systems and band-gap predictions. Quantum computing offers a pathway to address this, though current Noisy Intermediate-Scale Quantum (NISQ) hardware remains constrained by qubit resources, noise, and execution cost. This work presents a hybrid DFT-Quantum Embedding (QDFT) framework integrating classical HPC-based DFT with a quantum electronic-structure solver. Large systems are partitioned to isolate a chemically relevant active space, treated via the Variational Quantum Eigensolver (VQE), while the remaining degrees of freedom are described by DFT. The framework incorporates active-space selection, embedded Hamiltonian construction, symmetry preservation, operator mapping, self-consistent density updating, and modular classical-quantum coupling. We focus on noiseless quantum simulation to systematically evaluate accuracy, convergence, active-space dependence, computational cost, and HPC scalability without hardware noise. Detailed profiling identifies computational bottlenecks and highlights limitations of CPU-based quantum simulation. A QPU runtime-estimation methodology is additionally developed to assess execution requirements on actual quantum hardware. Results demonstrate quantum embedding's potential to improve selected electronic-structure properties while retaining classical HPC's scalability. Noisy quantum simulation and QPU execution remain key future directions, providing a pathway toward practical, scalable HPC-quantum hybrid simulations as hardware matures.

quant-pharXiv:2608.12884•Aug 14, 2026•0 citations

Characterising and approximating exact density functionals for model electronic systems

Michael Entwistle

Accurate descriptions of the electronic properties of molecules, solids and other materials are crucial in the development of many modern technologies, and are therefore the subject of much scientific research. In tandem with experimental research, computational simulations play a huge role. Density functional theory (DFT) is the most popular method for performing ground-state electronic structure calculations due to its accuracy in many situations along with its computational efficiency. Its time-dependent extension (TDDFT) allows the modelling of the dynamics of systems of interacting electrons. (TD)DFT is an exact theory in principle, but requires approximations in practice, specifically to the many-body effects of electron exchange and correlation (xc), which are described by some unknown universal functional. Despite much success, it often proves inadequate in many scenarios of increasing interest. Therefore, we aim to contribute to the development of improved approximate density functionals. \n \nIn this thesis, we take the approach of studying small model systems for which we can compute the exact functionals. These systems are designed to exhibit the key features present in realistic quantum systems, such as atoms and molecules, which the exact universal (TD)DFT functional is capable of describing, but are often ill-described by the commonly used approximations. By analysing the nature of these exact functionals, we gain valuable insight into their fundamental properties, together with identifying where the current approximations are lacking, thereby allowing us to suggest how these approximations may be improved.

•Jul 1, 2020•0 citations
The Doktorov’s quantum algorithm has been enacted in combination with time-dependent density functional theory (TD-DFT) to simulate the vibronic structure of the UV/visible absorption spectra of the phenol and phenolate molecules. On the one hand, DFT and TD-DFT are employed with classical algorithms to calculate the ground and excited-state electronic structures as well as their vibrational frequencies and normal modes, whereas, on the other hand, quantum algorithms are employed for evaluating the vibrational transition intensities. In comparison to a previous study, J. Phys. Chem. A 2024, 128, 4369–4377, which demonstrated Doktorov’s quantum algorithm as a proof of concept to predict the vibronic structure of ionization spectra, it is applied here to medium-size molecules with more than 30 vibrational normal modes, without accounting for Duschinsky rotations due to software limitations. This application to simulate the vibronic structures of the spectra of phenol and phenolate also enables assessing the impact of the differences in vibrational frequencies between the ground and excited electronic states.
In this work, a direct quantum implementation of the Doktorov formulas for calculating the vibronic spectrum of molecules under the harmonic approximation is presented. It is applied to the three-atom molecules H 2 O, SO 2, ClO 2, HS 2, and ZnOH. The method solves the classically hard problem of estimating the Franck–Condon (FC) factors by using the Duschinsky matrices as the only input via the Doktorov quantum circuit. This has the advantage of avoiding basis changes, artificial squeezing parameters, and symmetry dependencies. In other words, it is a general method for three-atom molecules that can easily be generalized to bigger molecules. The results are compared with other quantum algorithms and classical anharmonic algorithms. Furthermore, the circuit requirements are studied in order to estimate its applicability on real superconducting quantum hardware.
In the near future, material and drug design may be aided by quantum computer assisted simulations. These have the potential to target chemical systems intractable by the most powerful classical computers. However, the resources offered by contemporary quantum computers are still limited, restricting the simulations to very simple molecules. In order to rapidly scale up to more interesting molecular systems, we propose the embedding of the quantum electronic structure calculation into a classically computed environment obtained at the Hartree-Fock (HF) or density functional theory (DFT) level of theory. This result is achieved by constructing an effective Hamiltonian that incorporates a mean field potential describing the action of the inactive electrons on a selected Active Space (AS). The ground state of the AS Hamiltonian is then determined by means of the variational quantum eigensolver algorithm. We show that with the proposed HF and DFT embedding schemes, we can obtain significant energy corrections to the reference HF and DFT calculations for a number of simple molecules in their strongly correlated limit (the dissociation regime) as well as for systems of the size of the oxirane molecule.
In the first part of the dissertation, we develop a theoretical approach to analyze nonlinear spectroscopy experiments based on the formalism of quantum state (QST) and process tomography (QPT). In it, a quantum system is regarded as a black box which can be systematically tested in its performance, very much like an electric circuit is tested by sending a series of inputs and measuring the corresponding outputs, but in the quantum sense. We show how to collect a series of pump-probe or photon-echo experiments, and by varying polarizations and frequency components of the perturbations, reconstruct the quantum state (density matrix) of the probed system for a set of different initial conditions, hence simultaneously achieving QST and QPT. Furthermore, we establish the conditions under which a set of two-dimensional optical spectra also yield the desired results. Simulations of noisy experiments with inhomogeneous broadening show the feasibility of the protocol. A spin-off of this work is our suggestion of a witness that distinguishes between spectroscopic time-oscillations corresponding to vibronic only coherences against their electronic counterparts. We conclude by noting that the QST/QPT approach to nonlinear spectroscopy sheds light on the amount of quantum information contained in the output of an experiment, and hence, is a convenient theoretical and experimental paradigm even when the goal is not to perform a full QPT. In the second part of the thesis, we discuss a methodology to study the electronic dynamics of complex molecular systems, such as photosynthetic units, in the framework of time-dependent density functional theory (TD-DFT). By treating the electronic degrees of freedom as the system and the nuclear ones as the bath, we develop an open quantum systems (OQS) approach to TD-DFT. We formally extend the theoretical backbone of TD-DFT to OQS, and suggest a Markovian bath functional which can be readily included in electronic structure codes.
The excitation of vibrational modes in molecules affects the outcome of chemical reactions, for example by providing molecules with sufficient energy to overcome activation barriers. In this work, we introduce a quantum algorithm for simulating molecular vibrational excitations during vibronic transitions. We discuss how a special-purpose quantum computer can be programmed with molecular data to optimize a vibronic process such that desired modes get excited during the transition. We investigate the effect of such excitations on selective bond dissociation in pyrrole and butane during photochemical and mechanochemical vibronic transitions. The results are discussed with respect to experimental observations and classical simulations. We also introduce quantum-inspired classical algorithms for simulating molecular vibrational excitations in special cases where only a limited number of modes are of interest.
Scientific simulations demand methods combining scalability with predictive accuracy. Density Functional Theory (DFT) on High-Performance Computing (HPC) enables large-scale electronic-structure simulations but is limited by approximations affecting strongly correlated systems and band-gap predictions. Quantum computing offers a pathway to address this, though current Noisy Intermediate-Scale Quantum (NISQ) hardware remains constrained by qubit resources, noise, and execution cost. This work presents a hybrid DFT-Quantum Embedding (QDFT) framework integrating classical HPC-based DFT with a quantum electronic-structure solver. Large systems are partitioned to isolate a chemically relevant active space, treated via the Variational Quantum Eigensolver (VQE), while the remaining degrees of freedom are described by DFT. The framework incorporates active-space selection, embedded Hamiltonian construction, symmetry preservation, operator mapping, self-consistent density updating, and modular classical-quantum coupling. We focus on noiseless quantum simulation to systematically evaluate accuracy, convergence, active-space dependence, computational cost, and HPC scalability without hardware noise. Detailed profiling identifies computational bottlenecks and highlights limitations of CPU-based quantum simulation. A QPU runtime-estimation methodology is additionally developed to assess execution requirements on actual quantum hardware. Results demonstrate quantum embedding's potential to improve selected electronic-structure properties while retaining classical HPC's scalability. Noisy quantum simulation and QPU execution remain key future directions, providing a pathway toward practical, scalable HPC-quantum hybrid simulations as hardware matures.
Accurate descriptions of the electronic properties of molecules, solids and other materials are crucial in the development of many modern technologies, and are therefore the subject of much scientific research. In tandem with experimental research, computational simulations play a huge role. Density functional theory (DFT) is the most popular method for performing ground-state electronic structure calculations due to its accuracy in many situations along with its computational efficiency. Its time-dependent extension (TDDFT) allows the modelling of the dynamics of systems of interacting electrons. (TD)DFT is an exact theory in principle, but requires approximations in practice, specifically to the many-body effects of electron exchange and correlation (xc), which are described by some unknown universal functional. Despite much success, it often proves inadequate in many scenarios of increasing interest. Therefore, we aim to contribute to the development of improved approximate density functionals. \n \nIn this thesis, we take the approach of studying small model systems for which we can compute the exact functionals. These systems are designed to exhibit the key features present in realistic quantum systems, such as atoms and molecules, which the exact universal (TD)DFT functional is capable of describing, but are often ill-described by the commonly used approximations. By analysing the nature of these exact functionals, we gain valuable insight into their fundamental properties, together with identifying where the current approximations are lacking, thereby allowing us to suggest how these approximations may be improved.