Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Imaging and Applied Optics

Chip-Scale Atomic Devices: From Clocks to Brain Imaging and Beyond

John E. Kitching

Published Jan 1, 2024• 0 citations
Publisher

Abstract

Chip-scale atomic clocks and sensors combine elements of precision atomic spectroscopy, silicon micromachining and photonics technology to achieve good performance with small size and low power consumption. Recent advances will be discussed including compact optical clocks, micromachined atomic beam clocks. Full-text article not available; see video presentation

DOI
10.1364/3d.2024.jw2a.2

Related papers

CHIP-SCALE ATOMIC DEVICES

John E. Kitching, S. Knappe, P.D.D. Schwindt +12 more

Chip-scale atomic devices combine elements of precision atomic spectroscopy, silicon micromachining, and advanced diode laser technology to create compact, low-power, and manufacturable instruments with high precision and stability. Microfabricated alkali vapor cells are at the heart of most of these technologies, and the fabrication of these cells is discussed in detail. We review the design, fabrication, and performance of chip-scale atomic clocks, magnetometers, and gyroscopes and discuss many applications in which these novel instruments are being used. Finally, we present prospects for future generations of miniaturized devices, such as photonically integrated systems and manufacturable devices, which may enable embedded absolute measurement of a broad range of physical quantities.

Applied Physics Reviews•Jun 4, 2006•631 citations

Chip-scale atomic devices at NIST

Svenja A. Knappe, Peter D. D. Schwindt, Vladislav P. Gerginov +9 more

We provide an overview of our research on chip-scale atomic devices. By miniaturizing optical setups based on precision spectroscopy, we have developed small atomic sensors and atomic references such as atomic clocks, atomic magnetometers, and optical wavelength references. We have integrated microfabricated alkali vapor cells with small low-power lasers, micro-optics, and low-power microwave oscillators. As a result, we anticipate that atomic stability can be achieved with small size, low cost, battery-operated devices. Advances in fabrication methods and performance are presented.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 2, 2007•6 citations

Compact Platforms for Cold-Atom Clocks

Erling Riis, Paul F. Griffin, Aidan S. Arnold +1 more

We examine solutions for miniaturizing atomic clocks for performance at the 10^-15 level. Microwave and optical interrogation of a rubidium microwave clock are highlighted. MEMS and additively manufactured vacuum and spectroscopy cells will be presented. Full-text article not available; see video presentation

Frontiers in Optics•Jan 1, 2024•1 citation

Next-Generation Chip Scale Atomic Clocks

John E. Kitching, Matthew T. Hummon, William McGehee +2 more

Abstract We describe three independent research directions focussed on the development of next-generation chip-scale atomic clocks, which combine small size, low power consumption and manufacturability with high frequency stability. The use of optical transitions in microfabricated vapor cells improves both short- and long-term frequency stability to near 10−13 at the cost of the added complexity of a chip-scale optical frequency comb. Chip-scale atomic beam microwave clocks have been successfully demonstrated and offer the potential for microsecond-level timing accuracy over one week. And finally, Sr vapor cells have been developed with lifetimes exceeding 250 hours and residual gas pressures below 1 Torr.

Journal of Physics Conference Series•Nov 1, 2024•7 citations

Enhancing Optical Clock Performance with Multiple Atomic Ensembles

Shimon Kolkowitz

I will explain the motivation and operating principles of our multiplexed strontium optical lattice clock. We use this miniature clock network to bypass limitations to atomic clock comparisons and achieve new levels of precision. Full-text article not available; see video presentation

Frontiers in Optics•Jan 1, 2024•0 citations

Integrated photonics for atomic sensing

Matthew W. Puckett, Matthew C. Robbins, R. L. Compton +4 more

Integrated photonics has become valuable to a wide range of applications including data communication, ranging, and inertial and chemical sensing. More recently, integrated photonics has also shown promise as a new means of trapping and probing atoms in atomic clocks. In this manuscript, we discuss how controlling the spatial properties of light emitted from an integrated photonics chip can support the realization of an atomic clock with drastically reduced size, weight, and power consumption. Specifically, atomic clocks require the intersection of three orthogonal beams, each with an area of approximately 16 mm2, to trap and probe a cloud of atoms. For good trapping, these beams need to be well collimated and polarized, and to exhibit intensity profiles that are as close to uniform as possible. For beams of these dimensions, this means new techniques need to be employed to control the rate at which light spreads across an integrated photonics chip, as well as the rate at which it diffracts out of the chip itself, all while maintaining good collimation. Existing integrated photonics technologies have been limited in the beam sizes they can generate to the order of several 100’s of microns along either axis of the beam, and the results discussed here represent roughly an order of magnitude improvement in that metric.

Optical and Quantum Sensing and Precision Metrology•Mar 4, 2021•1 citation
Chip-scale atomic clocks and sensors combine elements of precision atomic spectroscopy, silicon micromachining and photonics technology to achieve good performance with small size and low power consumption. Recent advances will be discussed including compact optical clocks, micromachined atomic beam clocks. Full-text article not available; see video presentation
Chip-scale atomic devices combine elements of precision atomic spectroscopy, silicon micromachining, and advanced diode laser technology to create compact, low-power, and manufacturable instruments with high precision and stability. Microfabricated alkali vapor cells are at the heart of most of these technologies, and the fabrication of these cells is discussed in detail. We review the design, fabrication, and performance of chip-scale atomic clocks, magnetometers, and gyroscopes and discuss many applications in which these novel instruments are being used. Finally, we present prospects for future generations of miniaturized devices, such as photonically integrated systems and manufacturable devices, which may enable embedded absolute measurement of a broad range of physical quantities.
We provide an overview of our research on chip-scale atomic devices. By miniaturizing optical setups based on precision spectroscopy, we have developed small atomic sensors and atomic references such as atomic clocks, atomic magnetometers, and optical wavelength references. We have integrated microfabricated alkali vapor cells with small low-power lasers, micro-optics, and low-power microwave oscillators. As a result, we anticipate that atomic stability can be achieved with small size, low cost, battery-operated devices. Advances in fabrication methods and performance are presented.
Abstract We describe three independent research directions focussed on the development of next-generation chip-scale atomic clocks, which combine small size, low power consumption and manufacturability with high frequency stability. The use of optical transitions in microfabricated vapor cells improves both short- and long-term frequency stability to near 10−13 at the cost of the added complexity of a chip-scale optical frequency comb. Chip-scale atomic beam microwave clocks have been successfully demonstrated and offer the potential for microsecond-level timing accuracy over one week. And finally, Sr vapor cells have been developed with lifetimes exceeding 250 hours and residual gas pressures below 1 Torr.
Integrated photonics has become valuable to a wide range of applications including data communication, ranging, and inertial and chemical sensing. More recently, integrated photonics has also shown promise as a new means of trapping and probing atoms in atomic clocks. In this manuscript, we discuss how controlling the spatial properties of light emitted from an integrated photonics chip can support the realization of an atomic clock with drastically reduced size, weight, and power consumption. Specifically, atomic clocks require the intersection of three orthogonal beams, each with an area of approximately 16 mm2, to trap and probe a cloud of atoms. For good trapping, these beams need to be well collimated and polarized, and to exhibit intensity profiles that are as close to uniform as possible. For beams of these dimensions, this means new techniques need to be employed to control the rate at which light spreads across an integrated photonics chip, as well as the rate at which it diffracts out of the chip itself, all while maintaining good collimation. Existing integrated photonics technologies have been limited in the beam sizes they can generate to the order of several 100’s of microns along either axis of the beam, and the results discussed here represent roughly an order of magnitude improvement in that metric.