Quantum systems, including superconducting circuits, trapped ions, quantum dots, solid-state defects, etc., have achieved considerable advancements in readout fidelity. However, the widely used threshold method disregards the importance of temporal characteristics of the signal during continuous measurements, leading to information loss. Here, we applied Fisher information to quantify the potential enhancement by using the temporal information. We proposed an optimal data processing method and derived the condition for equality to the error constrained by Fisher information. Applying this method to the single-shot readout of a [Formula: see text] nuclear spin of nitrogen-vacancy center marks a 33.8 ± 1.2% error reduction compared to the threshold method, improving the fidelity to 99.649(5)%. The versatility of our method is further demonstrated through the single-shot readout of charge states. This work illustrates the advantage of using photon arrival time for improving readout fidelity without upgrading experimental hardware. The method of using Fisher information to analyze readout fidelity also holds promise for broad applicability to other systems.
Abstract Single-shot readout is a key component for scalable quantum information processing. However, many solid-state qubits with favorable properties lack the single-shot readout capability. One solution is to use the repetitive quantum-non-demolition readout technique, where the qubit is correlated with an ancilla, which is subsequently read out. The readout fidelity is therefore limited by the back-action on the qubit from the measurement. Traditionally, a threshold method is taken, where only the total photon count is used to discriminate qubit state, discarding all the information of the back-action hidden in the time trace of repetitive readout measurement. Here we show by using machine learning (ML), one obtains higher readout fidelity by taking advantage of the time trace data. ML is able to identify when back-action happened, and correctly read out the original state. Since the information is already recorded (but usually discarded), this improvement in fidelity does not consume additional experimental time, and could be directly applied to preparation-by-measurement and quantum metrology applications involving repetitive readout.
We analyze three different post-processing methods applied to a single-shot qubit readout: the average-signal (boxcar filter), peak-signal, and maximum-likelihood methods. In contrast to previous work, we account for a stochastic turn-on time
ti associated with the leading edge of a pulse signaling one of the qubit states. This model is relevant to spin-qubit readouts based on spin-to-charge conversion and would be generically reached in the limit of large signal-to-noise ratio
r for several other physical systems, including fluorescence-based readouts of ion-trap qubits and nitrogen-vacancy center spins. We derive analytical closed-form expressions for the conditional probability distributions associated with the peak-signal and boxcar filters. For the boxcar filter, we find an asymptotic scaling of the single-shot error rate $\ensuremath{\varepsilon}\ensuremath{\sim}lnr/\sqrt{r}$ when
ti is stochastic, in contrast to the result $\ensuremath{\varepsilon}\ensuremath{\sim}lnr/r$ for deterministic
ti. Consequently, the peak-signal method outperforms the boxcar filter significantly when
ti is stochastic, but is only marginally better for deterministic
ti (a result that is consistent with the widespread use of the boxcar filter for fluorescence-based readouts and the peak signal for spin-to-charge conversion). We generalize the theoretically optimal maximum-likelihood method to stochastic
ti and show numerically that a stochastic turn-on time
ti will always result in a larger single-shot error rate. Based on this observation, we propose a general strategy to improve the quality of single-shot readouts by forcing
ti to be deterministic.
Robust measurement of single quantum bits plays a key role in the realization of quantum computation and communication as well as in quantum metrology and sensing. We have implemented a method for the improved readout of single electronic spin qubits in solid-state systems. The method makes use of quantum logic operations on a system consisting of a single electronic spin and several proximal nuclear spin ancillae in order to repetitively readout the state of the electronic spin. Using coherent manipulation of a single nitrogen vacancy center in room-temperature diamond, full quantum control of an electronic-nuclear system consisting of up to three spins was achieved. We took advantage of a single nuclear-spin memory in order to obtain a 10-fold enhancement in the signal amplitude of the electronic spin readout. We also present a two-level, concatenated procedure to improve the readout by use of a pair of nuclear spin ancillae, an important step toward the realization of robust quantum information processors using electronic- and nuclear-spin qubits. Our technique can be used to improve the sensitivity and speed of spin-based nanoscale diamond magnetometers.
Precise readout of spin states is crucial for any approach toward physical realization of a spin-based quantum computer and for magnetometry with single spins. Here, we report a method to strongly improve the optical readout fidelity of electron spin states associated with single nitrogen-vacancy (NV) centers in diamond. The signal-to-noise ratio is enhanced significantly by performing conditional flip-flop processes between the electron spin and the nuclear spin of the NV center's nitrogen atom. The enhanced readout procedure is triggered by a short preparatory pulse sequence. As the nitrogen nuclear spin is intrinsically present in the system, this method is universally applicable to any nitrogen-vacancy center. Besides the readout method, our studies included coherent control over a single nitrogen nuclear spin for the first time.
For quantum sensing, it is vital to develop an efficient technique for determining the quantum state of the sensor. We optimize the weighting of the photoluminescence intensity for readout of the spin state of the nitrogen-vacancy (NV) center in diamond. We find that adopting a physical model that considers the optical transitions and relaxations of the NV center allows for an efficient readout. Our method improves the signal-to-noise ratio of the readout by 5.4% in a short time of 3 s, while the existing methods typically require 1 min of integration time. We also show that our technique enhances the readout of the nuclear spin memory. The demonstrated way is helpful for a wide range of measurements, from a few minutes to several days.
In this thesis, quantum states of single spin systems in solid state are investigated for potential applications in quantum information processing. The studied system is the nitrogen-vacancy defect in diamond, which can be thought of as a molecule trapped inside the diamond crystal. An issue for high-fidelity state preparation is the intitialization of the system. The photo-induced charge state dynamics of the nitrogen-vacancy defect is determined, and methods for charge state initialization are beeing developed. The electron spin state of single nitrogen-vacancy defects can be read out optically. Here, we focus on nearby nuclear spins coupled to the electron spin. We investigate the quantum evolution of a single nuclear spin, measurement of non-orthogonal quantum states and improved magnetic field sensing. Based on three nuclear spins, a small quantum register is realized. We prepare and measure the GHZ and the W state in this register, and implement an algorithm for quantum error correction.