Mathematical tools and concepts initially developed to study topological properties of geometrical objects have allowed for better understanding and interpretation of a number of phenomena in condensed matter physics, from the quantum Hall effect to topological insulators. It would be interesting to realize analogs of these phenomena with light scattered by cold atoms because atomic systems are simpler and allow for better control than complex solid-state compounds in which electrons interact with each other and with phonons, and where disorder is omnipresent. At the same time, mastering topological photonics of cold atoms may lead to interesting applications in quantum information science, for example. We study the opening of topological band gaps in two-dimensional honeycomb lattices of two-level atoms [1], the impact of disorder on their properties [2], as well as the constructive role that disorder can play by inducing a topologically nontrivial phase known as “topological Anderson insulator” [2,3]. Modifying the structure of the atomic lattice in an appropriate way allows for constructing a synthetic spin degree of freedom and thus for exploring the physics of spinful particles, such as the quantum spin Hall effect, for example. The analogy between topological phenomena in solid-state physics and in optics of cold atoms is not complete: atomic systems exhibit a number of new features due to the vector nature of light and to the differences in the impact of disorder on their properties.1. P. Wulles and S.E. Skipetrov, Topological photonic band gaps in honeycomb atomic arrays, arXiv:2308.134232. S.E. Skipetrov and P. Wulles, Topological transitions and Anderson localization of light in disordered atomic arrays, Phys. Rev. A 105, 043514 (2022)3. S.E. Skipetrov and P. Wulles, Photonic topological Anderson insulator in a two-dimensional atomic lattice, Comptes Rendus. Physique 24(S3), 39–54 (2023)
Mathematical tools and concepts initially developed to study topological properties of geometrical objects have allowed for better understanding and interpretation of a number of phenomena in condensed matter physics, from the quantum Hall effect to topological insulators. It would be interesting to realize analogs of these phenomena with light scattered by cold atoms because atomic systems are simpler and allow for better control than complex solid-state compounds in which electrons interact with each other and with phonons, and where disorder is omnipresent. At the same time, mastering topological photonics of cold atoms may lead to interesting applications in quantum information science, for example. We study the opening of topological band gaps in two-dimensional honeycomb lattices of two-level atoms [1], the impact of disorder on their properties [2], as well as the constructive role that disorder can play by inducing a topologically nontrivial phase known as “topological Anderson insulator” [2,3]. Modifying the structure of the atomic lattice in an appropriate way allows for constructing a synthetic spin degree of freedom and thus for exploring the physics of spinful particles, such as the quantum spin Hall effect, for example. The analogy between topological phenomena in solid-state physics and in optics of cold atoms is not complete: atomic systems exhibit a number of new features due to the vector nature of light and to the differences in the impact of disorder on their properties.1. P. Wulles and S.E. Skipetrov, Topological photonic band gaps in honeycomb atomic arrays, arXiv:2308.134232. S.E. Skipetrov and P. Wulles, Topological transitions and Anderson localization of light in disordered atomic arrays, Phys. Rev. A 105, 043514 (2022)3. S.E. Skipetrov and P. Wulles, Photonic topological Anderson insulator in a two-dimensional atomic lattice, Comptes Rendus. Physique 24(S3), 39–54 (2023)
Since the experimental realization of synthetic gauge fields for neutral atoms, the simulation of topologically nontrivial phases of matter with ultracold atoms has become a major focus of cold-atom experiments. However, several obvious differences exist between cold-atom and solid-state systems, for instance the small size of the atomic cloud and the smooth confining potential. In this article we show that sharp boundaries are not required to realize quantum Hall or quantum spin Hall physics in optical lattices and, on the contrary, that edge states in a smooth confinement exhibit additional interesting properties, such as spatially resolved splitting and merging of bulk bands and the emergence of robust auxiliary states in bulk gaps to preserve the topological quantum numbers. In addition, we numerically validate that these states are robust against disorder. Finally, we analyze possible detection methods, with a focus on Bragg spectroscopy, to demonstrate that the edge states can be detected and that Bragg spectroscopy can reveal how topological edge states are connected to the different bulk bands.
Interacting cold-atomic gases in optical lattices offer an experimental approach to outstanding problems of many body physics. One important example is the interplay of interaction and topology which promises to generate a variety of exotic phases such as the fractionalized Chern insulator or the topological Mott insulator. Both theoretically understanding these states of matter and finding suitable systems that host them have proven to be challenging problems. Here we propose a cold-atom setup where Hubbard on-site interactions give rise to spin liquid-like phases: weak and strong topological Mott insulators. They represent the celebrated paradigm of an interacting and topological quantum state with fractionalized spinon excitations that inherit the topology of the non-interacting system. Our proposal shall help to pave the way for a controlled experimental investigation of this exotic state of matter in optical lattices. Furthermore, it allows for the investigation of a dimensional crossover from a two-dimensional quantum spin Hall insulating phase to a three-dimensional strong topological insulator by tuning the hopping between the layers.
Interacting cold-atomic gases in optical lattices offer an experimental approach to outstanding problems of many body physics. One important example is the interplay of interaction and topology which promises to generate a variety of exotic phases such as the fractionalized Chern insulator or the topological Mott insulator. Both theoretically understanding these states of matter and finding suitable systems that host them have proven to be challenging problems. Here we propose a cold-atom setup where Hubbard on-site interactions give rise to spin liquid-like phases: weak and strong topological Mott insulators. They represent the celebrated paradigm of an interacting and topological quantum state with fractionalized spinon excitations that inherit the topology of the non-interacting system. Our proposal shall help to pave the way for a controlled experimental investigation of this exotic state of matter in optical lattices. Furthermore, it allows for the investigation of a dimensional crossover from a two-dimensional quantum spin Hall insulating phase to a three-dimensional strong topological insulator by tuning the hopping between the layers.
The present chapter discusses methods by which topological Bloch bands can be prepared in cold-atom setups. Focusing on the case of Chern bands for two-dimensional systems, we describe how topological properties can be triggered by driving atomic gases, either by dressing internal levels with light or through time-periodic modulations. We illustrate these methods with concrete examples, and we discuss recent experiments where geometrical and topological band properties have been identified. Introduction Ultracold atoms constitute a promising physical platform for the preparation and exploration of novel states of matter [1, 2, 3]. In particular, the engineering of topological band structures with cold-atom systems, together with the capability of tuning interactions between the particles, opens an interesting route toward the realization of intriguing strongly correlated states with topological features, such as fractional topological insulators and quantum Hall liquids [4]. This chapter is dedicated to the preparation and the detection of topological band structures characterized by nonzero Chern numbers [5]. Such Chern bands , which constitute the building blocks for realizing (fractional) Chern insulators [6, 7], arise in two-dimensional (2D) systems presenting time-reversal-symmetry (TRS) breaking effects. For instance, nontrivial Chern bands naturally appear in the Harper-Hofstadter model [8], a lattice penetrated by a uniform flux, where they generalize the (nondispersive) Landau levels to the lattice framework. Additionally, Chern bands also appear in staggered flux configurations, such as in Haldane's honeycomb-lattice model [9] or in lattice systems combining Rashba spin-orbit coupling and Zeeman (exchange) fields. The atoms being charge neutral, “magnetic” fluxes cannot be simply produced by subjecting optical lattices to “real” magnetic fields. It is the aim of this chapter to review several schemes that have been recently implemented in laboratories with the goal of realizing synthetic magnetic fields leading to Chern bands for cold atoms. Our presentation is complementary to that of Chapter 15, as we focus on synthetic magnetic fields in lattice-based systems for which the flux density can be made very large (with magnetic length comparable to interparticle spacing). The chapter is structured as follows: Section 14.2 describes how the Chern number is related to physical observables defined in a lattice framework. In particular, it clarifies the link between recent Chern-number measurements performed in cold bosonic gases and the more conventional (electronic) quantum Hall effect.
"The many weird properties of quantum mechanics at the very small scale have led to surprising and useful discoveries that manifest at the macroscopic level, like the quantum Hall effect and high temperature superconductivity. Yet trying to understand the origin of correlated behavior from interacting quantum systems via classical simulation requires an infeasible level of computing power. Instead, we can use an easily tunable, clean quantum system as a quantum simulation of a more unwieldy system, building the same model to study the same physics, but in a more controlled environment. Our field of cold neutral atoms in optical lattices has seen success over many years as a platform for quantum simulation of various lattice models from condensed matter physics. The recent (2015) implementation of lattices not in position, but in a synthetic dimension by coupling individual quantum states with lasers has led to a more bottom-up approach to engineering lattice models. In this thesis, we present our ""momentum-space lattice"" technique in which we use individual laser frequencies to couple the momentum states of a rubidium-87 Bose-Einstein condensate, in order to create lattices with site-by-site and link-by-link precision. This technique is simple to implement experimentally, requiring just two additional common optical components (acousto-optic modulators) compared to a real-space lattice, yet is incredibly versatile. Using momentum-space lattices, we have studied the physics of artificial magnetic fields, disorder and pseudodisorder-induced localization, and atomic interactions across eight works described in this thesis. More interesting are the not-so-well-known effects that arise in the interplay among these three components of topology, disorder, and interactions, and we have made headway towards studying physics in this regime. To be more specific, in our studies we have generated an artificial magnetic field for neutral atoms, and directly observed the resulting chiral currents in both a square ladder and zigzag lattice geometry. We have further monitored the quantum walk behavior of atoms under disordered and pseudodisordered lattices, observing a transition to localization under a quasiperiodic potential. We have been able to introduce a tunable energy dependence to this localization transition (single-particle mobility edge) in two ways: with the addition of more tunneling pathways, and by modifying the form of the potential. Finally, we have studied the effects of nonlinear inter-atomic interactions in the momentum-space lattice, observing self-trapping in a double well system as well as on a full lattice, showing a skewed current-phase relationship in an analog to Josephson junction arrays, and investigating an interaction-induced shift in localization behavior under pseudodisorder. In constructing the momentum-space lattice apparatus, Eric, Bryce, and I have created a promising new platform for Hamiltonian engineering. The studies described here not only show off the capabilities of the technique, but also realize new models, reveal new physics, and provide a new perspective complementary to both real-space lattice techniques and real materials. We have observed topological edge states more directly than previous works and engineered precise lattice parameter variations unavailable to other techniques, and yet the best is still to come. With our ongoing experimental upgrades comes access to the regime of strong inter-particle interactions, which promises more challenging yet more rewarding experiments."
What theoretical approaches are appropriate for describing topological quantum matter? The answer depends on the type of topological phase we want to study, e.g., noninteracting or interacting, and on the type of information we are interested in, e.g., generic properties or system-specific properties that are relevant to a particular experiment or type of experiment. Noninteracting topological phases can be described within topological band theory using the basic tools of the band theory of solids. However, the complexity of the model, i.e., how much detail has to be included, depends on whether we are only interested in the topological properties of the system or, in addition, we need to consider certain non-topological features. For example, predicting whether or not a specific material is a topological insulator requires detailed knowledge of its band structure, which can be acquired using density functional theory (DFT) methods. Similar treatments may be required to account for certain experimental features involving both topological and nontopological contributions. On the other hand, to understand the classification of topological insulators, it is sufficient to consider “bare bone” effective models, such as continuum Dirac models or simple tight-binding models. Topologically, these descriptions with extremely different levels of complexity are equivalent whenever one can smoothly connect the corresponding Hamiltonians (up to the addition/subtraction of trivial bands) without closing the bulk gap. However, the effective models provide only a crude description of experimentally relevant properties such as energy gaps, band dispersion, and real space properties of boundary states. In some sense, the situation is analogous to the characterization of a given mathematical object within topology, which only deals with properties that are robust against deformations, and geometry, which accounts for properties described by distances, angles, and shapes.