Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

European Microwave Conference (EuMC)

RF Pulse Distribution Network for a Compact Photon Pulse Source for Quantum Key Distribution

Uwe Stehr, Shraddha Supreeti, Mahsa Kaltwasser, Marcus Babin, Christopher Spiess, Shadia Chowdhury, Erik Beckert, Michael Zimmer, Ana Ćutuk, Lena Engel, Michael Jetter, Peter Michler, Jens Müller, Matthias Hein

Published Sep 24, 2024• 2 citations
Publisher

Abstract

In the context of the design of a compact faint pulse source, laser-optic and RF driver circuitry for the control of the vertical-cavity surface-emitting laser diodes must be designed. Our system design comprises an array of eight VCSEL diodes. Key parameters are a spectral wavelength difference of less than 1 pm and a temporal indistinguishability of less than 1 ps, as well as a polarization purity of more than 20 dB. Especially the temporal indistinguishability requires a length-matched design of the RF transmission lines from the electronic pulse source up to the optical laser array. In a first step, experimental investigations were performed to determine the feasibility to meet this specification. For the concept verification, a set of sixteen transmission lines was designed on a LTCC substrate with a RF connector at the input and wafer probe tips at the output. A back-to-back configuration was used to measure the performance of the setup. The results revealed the necessity of matching the lengths of the lines in order to meet the synchronization requirements between the laser control pulses. A redesign was done which eventually met the specification.

DOI
10.23919/eumc61614.2024.10732628

Related papers

Ultracompact, VCSEL-based photon source for prepare-and-measure QKD

Erik Beckert, Matthias Hein, Jens Mueller +9 more

We present the design and first performance evaluation of an ultra-compact, hybrid faint pulse source (FPS) at 850 nm, making use of a linear eight VCSELs array at spectral (<1 pm wavelength difference, and >90% overlap at FWHM) and temporal (<1 ps) indistinguishability, as well as polarization quality in the four H/V/D/A BB84 channels >15..20 dB. A VCSEL array on a single substrate is used, at a pitch of 250 μm and with integrated polarizers, having a spectral indistinguishability, if the substrate is temperature levelled < 0.5 K. Each VCSEL represents either faint or full amplitude signal for the H/V/D/A channels of the BB84 protocol. The temperature levelling heatsink is made of Molybdenium, integrated on LTCC board to host the emitter substrate and its respective DAC driving circuit at speeds up to 6 GHz. VCSEL integrated micro-lenses and two additional micro-lens arrays fully collimate the beams and refocus them into a waveguide combiner chip which realizes the polarization independent coupling of all eight VCSEL free-space beams with a pulse delay variation <1 ps.

Quantum Computing, Communication, and Simulation•Mar 19, 2025•1 citation

Design and Evaluation of a Handheld Quantum Key Distribution Sender module

Gwenaëlle Vest, Markus Rau, Lukas Fuchs +6 more

Currently most quantum key distribution (QKD) experiments are focusing on efficient long-distance implementations. Yet the recent development of miniaturized photonic modules and integrated quantum optics circuits could open new perspectives toward secure short-distance communication for daily-life applications. Here, we present the design of a new integrated optics architecture with an effective size of 25 mm × 2 mm × 1 mm. Our objective is to obtain an ultraflat microoptics QKD add-on suitable for integration into handheld platforms such as smartphones. In this context, we evaluated the suitability of various optical subsystems. We tested an array of four vertical cavity surface emitting lasers (VCSEL) with highly similar emission properties capable of producing subnanosecond near-infrared pulses at 100-MHz repetition rate. As short pulses exhibit a low polarization degree, their polarization can be externally controlled by a micropolarizer array. The fabrication of such elements is quite straightforward using standard lithographic techniques and extinction ratios up to 29 dB have been measured. To guarantee spatial indistinguishability of the qubits, we investigate the option of using low-birefringence, single-mode waveguide array manufactured via femtosecond laser micromachining.

IEEE Journal of Selected Topics in Quantum Electronics•Oct 20, 2014•59 citations

Monolithic 850 nm VCSEL array for quantum key distribution applications via the polarization-based BB84 and decoy-state protocol

Michael Zimmer, Katharina Dahler, Michael Jetter +1 more

Quantum cryptography based on the application of single photons offers a secure communication based on the laws of physics. However, given the sophisticated and challenging implementation of true-single photon sources, the majority of implementations takes advantage of the decoy state protocol, which uses weak coherent pulses instead. For polarization-based protocols, a typical sender configuration includes one or multiple laser sources with external optical elements to realize four different polarization states and two intensity levels (signal and decoy). In this regard, the application of eight independent lasers with fixed polarization makes an external state preparation unnecessary and allows for a higher signal rate, while requiring otherwise identical optical properties of all laser devices such as wavelength and linewidth. Here, we demonstrate a solution on the basis of a compact, monolithic VCSEL array operating at room temperature. The array consists of eight VCSELs with integrated subwavelength gratings for polarization control. Orthogonal polarization suppression ratios (OPSRs) of up to 19.7 dB (19.1 dB) are reached for the rectilinear (diagonal) basis. By careful adjustment of the individual VCSEL's operating point, a wavelength matching of all VCSELs is achieved at an emission wavelength of 851.2 nm.

Optics Letters•Aug 4, 2025•2 citations

Compact, high performant prepare-and-measure photon source based on indistinguishable VCSELs

Erik Beckert, Michael Jetter, Jens Mueller +13 more

We present an ultra-compact, hybrid faint pulse source (FPS) at 850 nm, making use of a linear eight VCSELs array at spectral (<1 pm wavelength difference, and >90% overlap at FWHM) and temporal (<1 ps) indistinguishability, as well as polarization quality in the four H/V/D/A BB84 channels >20 dB. A common VCSEL array on a single substrate is used, at a pitch of 250 μm and with integrated polarizers, having a spectral indistinguishability if the substrate is temperature levelled < 0.5 K. Each VCSEL represents either faint or full amplitude signal for the H/V/D/A channels of the BB84 protocol. The temperature levelling heatsink is made of Molybdenium, integrated on LTCC board to host the emitter substrate and its respective DAC driving circuit at speeds up to 10 GHz. VCSEL integrated micro-lenses and two additional micro-lens arrays fully collimate the beams and refocus them into a waveguide combiner chip which realizes the polarization independent coupling of all eight VCSEL free-space beams with a pulse delay variation <0.2 ps.

Quantum Computing, Communication, and Simulation•Mar 12, 2024•2 citations

Faint-Pulse Single-Photon Source Triggered by FPGA

Mohamed Saleh, Salem F. Hegazy

Among various implementations of single-photon sources, faint-pulse single-photon sources provide a simple and practical approach based on attenuated coherent laser pulses. This work presents an experimental realization of a faint-pulse single-photon source using a 785-nm Grating Stabilized Laser Diode system, driven by a laser diode controller and modulated by a Field Programmable Gate Array (FPGA). The system's performance was evaluated by analyzing the photon detection rate as a function of pulse width and driving current. Results indicated a linear relationship between the single-photon detection rate and pulse width and an exponential dependence on driving current. The system achieved a photon emission probability of 10% per pulse, aligning with the requirements of practical quantum key distribution systems. This implementation demonstrates a cost-effective, scalable, and accessible platform for single-photon experiments, providing a foundation for future implementations of quantum communication protocols.

National Radio Science Conference•May 6, 2025•1 citation

Fast optical source for quantum key distribution based on semiconductor optical amplifiers

Marc Jofre, Arnaud Gardelein, Gabriele Anzolin +16 more

A novel integrated optical source capable of emitting faint pulses with different polarization states and with different intensity levels at 100 MHz has been developed. The source relies on a single laser diode followed by four semiconductor optical amplifiers and thin film polarizers, connected through a fiber network. The use of a single laser ensures high level of indistinguishability in time and spectrum of the pulses for the four different polarizations and three different levels of intensity. The applicability of the source is demonstrated in the lab through a free space quantum key distribution experiment which makes use of the decoy state BB84 protocol. We achieved a lower bound secure key rate of the order of 3.64 Mbps and a quantum bit error ratio as low as 1.14×10⁻² while the lower bound secure key rate became 187 bps for an equivalent attenuation of 35 dB. To our knowledge, this is the fastest polarization encoded QKD system which has been reported so far. The performance, reduced size, low power consumption and the fact that the components used can be space qualified make the source particularly suitable for secure satellite communication.

arXiv:1102.3033•Optics Express•Feb 14, 2011•22 citations
In the context of the design of a compact faint pulse source, laser-optic and RF driver circuitry for the control of the vertical-cavity surface-emitting laser diodes must be designed. Our system design comprises an array of eight VCSEL diodes. Key parameters are a spectral wavelength difference of less than 1 pm and a temporal indistinguishability of less than 1 ps, as well as a polarization purity of more than 20 dB. Especially the temporal indistinguishability requires a length-matched design of the RF transmission lines from the electronic pulse source up to the optical laser array. In a first step, experimental investigations were performed to determine the feasibility to meet this specification. For the concept verification, a set of sixteen transmission lines was designed on a LTCC substrate with a RF connector at the input and wafer probe tips at the output. A back-to-back configuration was used to measure the performance of the setup. The results revealed the necessity of matching the lengths of the lines in order to meet the synchronization requirements between the laser control pulses. A redesign was done which eventually met the specification.
We present the design and first performance evaluation of an ultra-compact, hybrid faint pulse source (FPS) at 850 nm, making use of a linear eight VCSELs array at spectral (<1 pm wavelength difference, and >90% overlap at FWHM) and temporal (<1 ps) indistinguishability, as well as polarization quality in the four H/V/D/A BB84 channels >15..20 dB. A VCSEL array on a single substrate is used, at a pitch of 250 μm and with integrated polarizers, having a spectral indistinguishability, if the substrate is temperature levelled < 0.5 K. Each VCSEL represents either faint or full amplitude signal for the H/V/D/A channels of the BB84 protocol. The temperature levelling heatsink is made of Molybdenium, integrated on LTCC board to host the emitter substrate and its respective DAC driving circuit at speeds up to 6 GHz. VCSEL integrated micro-lenses and two additional micro-lens arrays fully collimate the beams and refocus them into a waveguide combiner chip which realizes the polarization independent coupling of all eight VCSEL free-space beams with a pulse delay variation <1 ps.
Currently most quantum key distribution (QKD) experiments are focusing on efficient long-distance implementations. Yet the recent development of miniaturized photonic modules and integrated quantum optics circuits could open new perspectives toward secure short-distance communication for daily-life applications. Here, we present the design of a new integrated optics architecture with an effective size of 25 mm × 2 mm × 1 mm. Our objective is to obtain an ultraflat microoptics QKD add-on suitable for integration into handheld platforms such as smartphones. In this context, we evaluated the suitability of various optical subsystems. We tested an array of four vertical cavity surface emitting lasers (VCSEL) with highly similar emission properties capable of producing subnanosecond near-infrared pulses at 100-MHz repetition rate. As short pulses exhibit a low polarization degree, their polarization can be externally controlled by a micropolarizer array. The fabrication of such elements is quite straightforward using standard lithographic techniques and extinction ratios up to 29 dB have been measured. To guarantee spatial indistinguishability of the qubits, we investigate the option of using low-birefringence, single-mode waveguide array manufactured via femtosecond laser micromachining.
Quantum cryptography based on the application of single photons offers a secure communication based on the laws of physics. However, given the sophisticated and challenging implementation of true-single photon sources, the majority of implementations takes advantage of the decoy state protocol, which uses weak coherent pulses instead. For polarization-based protocols, a typical sender configuration includes one or multiple laser sources with external optical elements to realize four different polarization states and two intensity levels (signal and decoy). In this regard, the application of eight independent lasers with fixed polarization makes an external state preparation unnecessary and allows for a higher signal rate, while requiring otherwise identical optical properties of all laser devices such as wavelength and linewidth. Here, we demonstrate a solution on the basis of a compact, monolithic VCSEL array operating at room temperature. The array consists of eight VCSELs with integrated subwavelength gratings for polarization control. Orthogonal polarization suppression ratios (OPSRs) of up to 19.7 dB (19.1 dB) are reached for the rectilinear (diagonal) basis. By careful adjustment of the individual VCSEL's operating point, a wavelength matching of all VCSELs is achieved at an emission wavelength of 851.2 nm.
We present an ultra-compact, hybrid faint pulse source (FPS) at 850 nm, making use of a linear eight VCSELs array at spectral (<1 pm wavelength difference, and >90% overlap at FWHM) and temporal (<1 ps) indistinguishability, as well as polarization quality in the four H/V/D/A BB84 channels >20 dB. A common VCSEL array on a single substrate is used, at a pitch of 250 μm and with integrated polarizers, having a spectral indistinguishability if the substrate is temperature levelled < 0.5 K. Each VCSEL represents either faint or full amplitude signal for the H/V/D/A channels of the BB84 protocol. The temperature levelling heatsink is made of Molybdenium, integrated on LTCC board to host the emitter substrate and its respective DAC driving circuit at speeds up to 10 GHz. VCSEL integrated micro-lenses and two additional micro-lens arrays fully collimate the beams and refocus them into a waveguide combiner chip which realizes the polarization independent coupling of all eight VCSEL free-space beams with a pulse delay variation <0.2 ps.
Among various implementations of single-photon sources, faint-pulse single-photon sources provide a simple and practical approach based on attenuated coherent laser pulses. This work presents an experimental realization of a faint-pulse single-photon source using a 785-nm Grating Stabilized Laser Diode system, driven by a laser diode controller and modulated by a Field Programmable Gate Array (FPGA). The system's performance was evaluated by analyzing the photon detection rate as a function of pulse width and driving current. Results indicated a linear relationship between the single-photon detection rate and pulse width and an exponential dependence on driving current. The system achieved a photon emission probability of 10% per pulse, aligning with the requirements of practical quantum key distribution systems. This implementation demonstrates a cost-effective, scalable, and accessible platform for single-photon experiments, providing a foundation for future implementations of quantum communication protocols.
A novel integrated optical source capable of emitting faint pulses with different polarization states and with different intensity levels at 100 MHz has been developed. The source relies on a single laser diode followed by four semiconductor optical amplifiers and thin film polarizers, connected through a fiber network. The use of a single laser ensures high level of indistinguishability in time and spectrum of the pulses for the four different polarizations and three different levels of intensity. The applicability of the source is demonstrated in the lab through a free space quantum key distribution experiment which makes use of the decoy state BB84 protocol. We achieved a lower bound secure key rate of the order of 3.64 Mbps and a quantum bit error ratio as low as 1.14×10⁻² while the lower bound secure key rate became 187 bps for an equivalent attenuation of 35 dB. To our knowledge, this is the fastest polarization encoded QKD system which has been reported so far. The performance, reduced size, low power consumption and the fact that the components used can be space qualified make the source particularly suitable for secure satellite communication.