Quantum error correcting (QEC) codes protect quantum information from decoherence as long as error rates fall below critical error thresholds. In general, obtaining thresholds implies simulating the QEC procedure using, in general, suboptimal decoding strategies. In a few cases and for sufficiently simple noise models, optimal decoding of QEC codes can be framed as a phase transition in disordered classical spin models. In both situations, accurate estimation of thresholds demands intensive computational resources. Here we use the coherent information of the mixed state of noisy QEC codes to accurately estimate the associated optimal QEC thresholds already from small-distance codes at moderate computational cost. We show the effectiveness and versatility of our method by applying it first to the topological surface and color code under bit-flip and depolarizing noise. We then extend the coherent information based methodology to phenomenological and quantum circuit level noise settings. For all examples considered, we obtain highly accurate estimates of optimal error thresholds from small, low-distance instances of the codes, in close agreement with threshold values reported in the literature. Our findings establish the coherent information as a reliable competitive tool for the calculation of optimal thresholds of state-of-the-art QEC codes under realistic noise models. Published by the American Physical Society 2024
Quantum error correcting (QEC) codes protect quantum information from decoherence as long as error rates fall below critical error thresholds. In general, obtaining thresholds implies simulating the QEC procedure using, in general, suboptimal decoding strategies. In a few cases and for sufficiently simple noise models, optimal decoding of QEC codes can be framed as a phase transition in disordered classical spin models. In both situations, accurate estimation of thresholds demands intensive computational resources. Here we use the coherent information of the mixed state of noisy QEC codes to accurately estimate the associated optimal QEC thresholds already from small-distance codes at moderate computational cost. We show the effectiveness and versatility of our method by applying it first to the topological surface and color code under bit-flip and depolarizing noise. We then extend the coherent information based methodology to phenomenological and quantum circuit level noise settings. For all examples considered, we obtain highly accurate estimates of optimal error thresholds from small, low-distance instances of the codes, in close agreement with threshold values reported in the literature. Our findings establish the coherent information as a reliable competitive tool for the calculation of optimal thresholds of state-of-the-art QEC codes under realistic noise models. Published by the American Physical Society 2024
Quantum error correcting (QEC) codes protect quantum information from decoherence, as long as error rates fall below critical error thresholds. In general, obtaining thresholds implies simulating the QEC procedure using, in general, sub-optimal decoding strategies. In a few cases and for sufficiently simple noise models, optimal decoding of QEC codes can be framed as a phase transition in disordered classical spin models. In both situations, accurate estimation of thresholds demands intensive computational resources. Here we use the coherent information of the mixed state of noisy QEC codes to accurately estimate the associated optimal QEC thresholds already from small-distance codes at moderate computational cost. We show the effectiveness and versatility of our method by applying it first to the topological surface and color code under bit-flip and depolarizing noise. We then extend the coherent information based methodology to phenomenological and quantum circuit level noise settings. For all examples considered we obtain highly accurate estimates of optimal error thresholds from small, low-distance instances of the codes, in close accordance with threshold values reported in the literature. Our findings establish the coherent information as a reliable competitive practical tool for the calculation of optimal thresholds of state-of-the-art QEC codes under realistic noise models.
Quantum error correcting (QEC) codes protect quantum information against environmental noise. Computational errors caused by the environment change the quantum state within the qubit subspace, whereas quantum erasures correspond to the loss of qubits at known positions. Correcting either type of error involves different correction mechanisms, which makes studying the interplay between erasure and computational errors particularly challenging. In this work, we propose a framework based on the coherent information (CI) of the mixed-state density operator associated to noisy QEC codes, for treating both types of errors together. We show how to rigorously derive different families of statistical mechanics mappings for generic stabilizer QEC codes in the presence of both types of errors. We observe that the erasure errors enter as a classical average over fully depolarizing channels. Further, we show that computing the CI for erasure errors only can be done efficiently upon sampling over erasure configurations. We then test our approach on the two-dimensional toric and color codes and compute optimal thresholds for erasure errors only, finding a 50 % threshold for both codes. This strengthens the notion that both codes share the same optimal thresholds. When considering both computational and erasure errors, the CI of small-size codes yields thresholds in very accurate agreement with established results that have been obtained in the thermodynamic limit. Next, we perform a similar analysis for a low-density parity-check (LDPC) code—the lift-connected surface code. We find a 50 % threshold under erasure errors alone and, for the first time, derive the exact statistical mechanics mappings in the presence of both computational and erasure errors. We thereby further establish the CI as a practical tool for studying optimal thresholds for code classes beyond topological codes under realistic noise, and as a means for uncovering new relations between QEC codes and statistical physics models.
As quantum computers remain susceptible to noise, QEC is essential for preserving logical information during computations. However, the performance of QEC codes breaks down beyond certain noise thresholds, revealing fundamental limits on their ability to protect quantum information. These limits can be characterized using information-theoretic measures such as the coherent information, which quantifies the maximum rate at which logical information can be reliably transmitted through a noisy quantum channel. In this work, we establish a direct connection between the CI and the binary cross-entropy loss used when training neural network decoders. Specifically, we show that the CI constitutes a sharp lower bound on the achievable loss for decoders that track logical operators across noisy channels. To this end, we develop a transformer-based neural network model based on maximum likelihood decoding. We train this network to estimate the CI and evaluate its performance on the surface code under three noise models: code capacity, phenomenological, and circuit-level noise. Our results demonstrate that the network accurately predicts CI and yields threshold estimates that closely match known theoretical limits. When used as a decoder, the network significantly outperforms the minimum weight perfect matching decoder in terms of logical error rate. We also introduce a novel soft post-selection scheme that independently treats uncertainty in both logical operators and relies on confidence-based filtering of the network's output. We prove that such post-selection strategies, based on the MLD cosets, are optimal, and demonstrate their scalability in terms of both logical error rate and abort probability. These findings establish transformer-based architectures as powerful tools for QEC and provide the first numerical evidence supporting the optimality and scalability of MLD-based post-selection.
Quantum error correcting (QEC) codes protect quantum information against environmental noise. Computational errors caused by the environment change the quantum state within the qubit subspace, whereas quantum erasures correspond to the loss of qubits at known positions. Correcting either type of error involves different correction mechanisms, which makes studying the interplay between erasure and computational errors particularly challenging. In this work, we propose a framework based on the coherent information (CI) of the mixed-state density operator associated to noisy QEC codes, for treating both types of errors together. We show how to rigorously derive different families of statistical mechanics mappings for generic stabilizer QEC codes in the presence of both types of errors. Further, we show that computing the CI for erasure errors only can be done efficiently upon sampling over erasure configurations. We then test our approach on the 2D toric and color codes and compute optimal thresholds for erasure errors only, finding a 50 percent threshold for both codes. This strengthens the notion that both codes share the same optimal thresholds. When considering both computational and erasure errors, the CI of small-size codes yields thresholds in very accurate agreement with established results that have been obtained in the thermodynamic limit. Next, we perform a similar analysis for a low-density parity-check (LDPC) code, the lift-connected surface code. We find a 50 percent threshold under erasure errors alone and, for the first time, derive the exact statistical mechanics mappings in the presence of both computational and erasure errors. We thereby further establish the CI as a practical tool for studying optimal thresholds for code classes beyond topological codes under realistic noise, and as a means for uncovering new relations between QEC codes and statistical physics models.
The rapidly growing landscape of quantum error-correction (QEC) protocols has produced a wealth of numerical data, but comparatively few heuristics for understanding and predicting their performance. Here, we develop a simple entropy-based proxy that predicts the thresholds of a variety of QEC protocols, ranging from the code-capacity setting of Clifford-deformed surface codes with biased Pauli or erasure noise to the circuit-level noise model of the surface or color codes with flag qubits. Our proxy estimates the threshold by locally comparing the noise entropy with the error information gained via stabilizer measurements (or spacetime detectors and flag outcomes in the circuit-level settings). Despite neglecting correlations between stabilizer outcomes and the contribution from code degeneracy, the proxy captures the main trends across diverse settings and yields threshold estimates in good agreement with numerical results. Our work develops much-needed phenomenology that enables simple back-of-the-envelope estimates of QEC performance, recovering and providing an explanation for the results of computationally intensive detailed simulations.
Quantum error correction is an essential ingredient for reliable quantum computation for theoretically provable quantum speedup. Topological color codes, one of the quantum error correction codes, have an advantage against the surface codes in that all Clifford gates can be implemented transversally. However, the hardness of decoding makes the color codes not suitable as the best candidate for experimentally feasible implementation of quantum error correction. Here we propose an Ising model formulation that enables highly accurate decoding of the color codes. In this formulation, we map stabilizer operators to classical spin variables to represent an error satisfying the syndrome. Then we construct an Ising Hamiltonian that counts the number of errors and formulate the decoding problem as an energy minimization problem of an Ising Hamiltonian, which is solved by simulated annealing. In numerical simulations on the (4.8.8) lattice, we find an error threshold of 10.36(5)% for bit-flip noise model, 18.47(5)% for depolarizing noise model, and 2.90(4)% for phenomenological noise model (bit-flip error is located on each of data and measurement qubits), all of which are higher than the thresholds of existing efficient decoding algorithms. Furthermore, we verify that the achieved logical error rates are almost optimal in the sense that they are almost the same as those obtained by exact optimizations by CPLEX with smaller decoding time in many cases. Since the decoding process has been a bottleneck for performance analysis, the proposed decoding method is useful for further exploration of the possibility of the topological color codes. Published by the American Physical Society 2024