We study multiplexed quantum frequency conversion (m-QFC) on a single waveguide, where a single pump beam simultaneously converts multiple signal beams at distinct wavelengths. Using a three-peak periodically poled lithium niobate (PPLN) waveguide, we demonstrate the multiplexed upconversion in the telecom band with internal efficiencies up to 73.6%. Tested with a multichannel photon-pair source, the quantum correlation is preserved well after the conversion, with coincidence-to-accidental ratio reaching 767. These results highlight a viable device approach to multiplexed quantum key distribution, quantum sensing, and quantum computing.
We study multiplexed quantum frequency conversion (m-QFC) on a single waveguide, where a single pump beam simultaneously converts multiple signal beams at distinct wavelengths. Using a three-peak periodically poled lithium niobate (PPLN) waveguide, we demonstrate the multiplexed upconversion in the telecom band with internal efficiencies up to 73.6%. Tested with a multichannel photon-pair source, the quantum correlation is preserved well after the conversion, with coincidence-to-accidental ratio reaching 767. These results highlight a viable device approach to multiplexed quantum key distribution, quantum sensing, and quantum computing.
Quantum frequency conversion (QFC), which involves the exchange of frequency modes of photons, is a prerequisite for quantum interconnects among various quantum systems, primarily those based on telecom photonic network infrastructures. Compact and fiber-closed QFC modules are in high demand for such applications. In this paper, we report such a QFC module based on a fiber-coupled 4-port frequency converter with a periodically poled lithium niobate (PPLN) waveguide. The demonstrated QFC shifted the wavelength of a single photon from 780 to 1541 nm. The single photon was prepared via spontaneous parametric down-conversion (SPDC) with heralding photon detection, for which the cross-correlation function was 40.45 ± 0.09. The observed cross-correlation function of the photon pairs had a nonclassical value of 13.7 ± 0.4 after QFC at the maximum device efficiency of 0.73, which preserved the quantum statistical property. Such an efficient QFC module is useful for interfacing atomic systems and fiber-optic communication.
Interconnecting heterogeneous quantum systems is an important step toward realizing the quantum internet. We propose a quantum network hub that interfaces local quantum devices with dense wavelength-division multiplexing (DWDM) networks in the telecom band via quantum frequency conversion (QFC) with frequency-channel selectivity. We show that standard periodically poled lithium niobate waveguides used for QFC exhibit a dispersion sweet spot, for example around the 780 nm band, enabling wide tunability of the pump wavelength while maintaining phase matching. Experimentally, we demonstrate the network hub by implementing a channel-selective and polarization-insensitive QFC from 780 nm to telecom wavelengths around 1540 nm. We achieve a pump tuning range of 2 THz and successfully distribute polarization-encoded single photons into 16 frequency channels on the ITU-T DWDM grid with 25 GHz channel spacing, while preserving the quantum information. These results position the QFC-based hub as a versatile backbone for connecting a wide range of quantum devices, spanning both photonic and matter-based systems, across frequency-multiplexed telecom networks.
Signal photons emitted by quantum nodes typically fall outside the low-loss telecom window of optical fibers, leading to severe transmission losses. Quantum frequency conversion (QFC) offers an effective optical interface that bridges quantum nodes with telecom-band channels, enabling long-distance quantum communication. In this work, we demonstrate a compact, fiber-integrated QFC system with low noise and a high signal-to-noise ratio (SNR). Using a periodically poled lithium niobate (PPLN) waveguide, input photons at 637.2 nm are down-converted to telecom photons at 1588.3 nm. Our system achieves a total conversion efficiency of approximately 9%, with pump-induced noise suppressed to 154 Hz. For input photon rates of 32.7, 118.0, and 327.7 kHz, the corresponding SNRs are 12.3, 43.9, and 117.8, respectively. We further develop a theoretical model to simulate the entanglement fidelity between nitrogen-vacancy (NV) center spins and the frequency-converted telecom photons. At the emission rate of an NV center, our QFC system maintains an expected fidelity exceeding 52% over a transmission distance of 100 km. These findings highlight the potential of our QFC system for scalable, long-distance quantum networking.
In this paper, we demonstrate integrated photonic chips for multichannel quantum frequency conversion (QFC) based on reverse-proton-exchange periodically poled lithium niobate waveguides. The integrated chip is fiber coupled with two 34-channel fiber arrays, showing an average fiber-to-fiber sum-frequency generation (SFG) conversion efficiency of about 60% for multichannels. Then the same integrated chip is used to perform multichannel differential-frequency generation (DFG), showing the potential application in long-distance multimode quantum memory. Moreover, the integrated chip is utilized to construct a multichannel up-conversion detector, which has extensive applications including deep-space laser communication, high-rate quantum-key distribution, and single-photon imaging.
The quantum nature of light at the single photon level allows for unique applications that classical physics neither predicts nor describes. Most notably, appropriate conditions may cause the states of photons with indistinguishable properties to become entangled, enabling novel approaches to quantum computation, secure communications, and metrology. \n \nAny operational quantum information network transporting entangled-photon states must establish a high-fidelity link between its distant nodes despite the inherent fragility of entangled states. However, the lack of a universal operating wavelength for all optical devices makes this a substantial challenge. Telecommunication fibers, entangled photon pair sources, quantum optical memories, and quantum repeaters all function in disparate spectral windows dictated by the properties of the materials used to fabricate them. Quantum frequency conversion (QFC), the single-photon limit of nonlinear parametric sum and difference frequency generation in optics, offers a bridge between spectral regions with full preservation of quantum state character, including entanglement. \n \nPeriodically poled optical waveguides in ferroelectric crystals are versatile tools in nonlinear optics. Confining the nonlinear interaction to a waveguide greatly enhances its efficiency compared to bulk optics. Periodic poling, the process of periodically inverting the domains of a ferroelectric medium using a strong electric field, enables a variety of quasi-phase matching configurations to engineer a desired nonlinear interaction. \n \nThis work concentrates on the design, development, fabrication, and characterization of a titanium-diffused periodically poled lithium niobate (Ti:PPLN) waveguide device. This device is designed to execute single-step quantum frequency conversion from 369.5nm to 1550nm in order to facilitate a quantum state transfer between standard fiber telecommunication wavelengths and an atomic quantum memory system employing trapped ytterbium ions. \n \nThe creation of phase matching conditions for such an extreme distance in frequency demands precise control of high magnitude electric fields on the single-micron scale. As the first demonstration of its kind in Ti:PPLN, the development of these devices included novel improvements to existing fabrication methods, improving the state-of-the-art of precision, quality, and yield for poling of ferroelectric crystals.
Abstract The lithium niobate on insulator (LNOI) platform has revolutionized lithium niobate materials, and a series of quantum photonic chips have exhibited unprecedented performances. Quantum frequency conversion (QFC) that enables quantum state preservation during frequency conversion is crucial in quantum technology. This work demonstrates a low-noise QFC process on the LNOI nanophotonic platform, connecting telecom and near-visible bands. An internal conversion efficiency of 73% and an on-chip noise count of 900 counts per second (cps) are achieved. Furthermore, the preservation of quantum statistical properties is verified, indicating the QFC chip’s promise for extensive applications of LNOI integrated circuits in quantum information. Based on this chip, we constructed an upconversion single-photon detector with a detection efficiency of 8.7% and a noise of 300 cps, paving the way to integrated on-chip single-photon detection. The realization of a low-noise QFC device also provide a pathway for practical chip-scale QFC-based quantum systems in heterogeneous configurations.