Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optica Quantum

Noise resilient and accurate target detection using fractional-order Fourier domain correlation

Georgios Papangelakis, Phillip S. Blakey, Han Liu, Bhashyam Balaji, Amr Saher Helmy

Published Sep 12, 2024• 1 citation
Publisher

Abstract

Quantum enhanced optical target detection provides a unique route to increased noise resilience of classical LiDARs (laser imaging, detection, and ranging) by using time correlation of non-classical photon pairs. Such enhancement is dictated by the detector temporal uncertainty that is typically orders of magnitude larger than the intrinsic correlation time. To circumvent such detector limitation, we explore the possibility of measuring correlation in the fractional-order Fourier domain (FrFD), which can be realized with the non-local dispersion cancellation. Experimentally, we verify this principle using a fiber-coupled waveguide source of photon pairs, showing enhanced noise rejection as compared with conventional time-domain coincidence detection and classical intensity detection. For false alarm rates of 10 −9 , an 89 dB improved detection rate is measured using receiver operating characteristics when comparing our FrFD protocol with classical intensity detection. Additionally, we discussed the resilience of FrFD correlation against intentionally prepared counterfeit signal photons. The possibility enabled by measuring correlation in the FrFD should also provide potential benefit for various sensing and communication protocols that relies on coincidence detection.

DOI
10.1364/opticaq.521275

Related papers

Quantum and non-local effects offer over 40 dB noise resilience advantage towards quantum lidar

Phillip S. Blakey, Han Liu, Georgios Papangelakis +4 more

Non-local effects have the potential to radically move forward quantum enhanced imaging to provide an advantage over classical imaging not only in laboratory environments but practical implementation. In this work, we demonstrate a 43dB higher signal-to-noise ratio (SNR) using a quantum enhanced LiDAR based on time-frequency entanglement compared with a classical phase-insensitive quantum imaging system. Our system can tolerate more than 3 orders of magnitude higher noise than classical single-photon counting quantum imaging systems before detector saturation with a detector dead time of 25ns. To achieve these advantages, we use non-local cancellation of dispersion to take advantage of the strong temporal correlations in photon pairs in spite of the orders of magnitude larger detector temporal uncertainty. We go on to incorporate this scheme with purpose-built scanning collection optics to image non-reflecting targets in an environment with noise.

arXiv:2209.09799•Nature Communications•Sep 26, 2022•41 citations

Enhancing LIDAR performance metrics using continuous-wave photon-pair sources

Han Liu, Daniel Giovannini, Haoyu He +4 more

In order to enhance LIDAR performance metrics such as target detection sensitivity, noise resilience and ranging accuracy, we exploit the strong temporal correlation within the photon pairs generated in continuous-wave pumped semiconductor waveguides. The enhancement attained through the use of such non-classical sources is measured and compared to a corresponding target detection scheme based on simple photon-counting detection. The performances of both schemes are quantified by the estimation uncertainty and Fisher information of the probe photon transmission, which is a widely adopted sensing figure of merit. The target detection experiments are conducted with high probe channel loss (\(\simeq 1-5\times10^{-5}\)) and formidable environment noise up to 36 dB stronger than the detected probe power of \(1.64\times 10^{-5}\) pW. The experimental result shows significant advantages offered by the enhanced scheme with up to 26.3 dB higher performance in terms of estimation uncertainty, which is equivalent to a reduction of target detection time by a factor of 430 or 146 (21.6 dB) times more resilience to noise. We also experimentally demonstrated ranging with these non-classical photon pairs generated with continuous-wave pump in the presence of strong noise and loss, achieving \(\approx\)5 cm distance resolution that is limited by the temporal resolution of the detectors.

arXiv:2004.06754•Optica•Oct 9, 2019•67 citations

Entanglement-Enhanced Receiver Operating Characteristics

Georgios Papangelakis, Phillip S. Blakey, Han Liu +2 more

We improve the performance of temporal coincidence counting using fractional Fourier domain time-frequency correlations achieved through non-local dispersion protocols. This protocol achieved up to an 89 dB improved detection rate using receiver operating characteristics.

•Jan 1, 2025•0 citations

Compact all-fiber quantum-inspired LiDAR with over 100 dB noise rejection and single photon sensitivity

Han Liu, Changhao Qin, Georgios Papangelakis +2 more

Entanglement and correlation of quantum light can enhance LiDAR sensitivity in the presence of strong background noise. However, the power of such quantum sources is fundamentally limited to a stream of single photons and cannot compete with the detection range of high-power classical LiDAR transmitters. To circumvent this, we develop and demonstrate a quantum-inspired LiDAR prototype based on coherent measurement of classical time-frequency correlation. This system uses a high-power classical source and maintains the high noise rejection advantage of quantum LiDARs. In particular, we show that it can achieve over 100dB rejection (with 100ms integration time) of indistinguishable (with statistically identical properties in every degree of freedom) in-band noise while still being sensitive to single photon signals. In addition to the LiDAR demonstration, we also discuss the potential of the proposed LiDAR receiver for quantum information applications. In particular, we propose the chaotic quantum frequency conversion technique for coherent manipulation of high dimensional quantum states of light. It is shown that this technique can provide improved performance in terms of selectivity and efficiency as compared to pulse-based quantum frequency conversion.

Nature Communications•Sep 2, 2023•26 citations

Quantum LiDAR with non-local modulation

Xiao-Dong Fan, Zhong-Hua Ou, Yun-Ru Fan +13 more

Quantum light detection and ranging (LiDAR) utilizes quantum entanglement and correlation to improve precision, noise resilience and covertness of target detection. Despite recent advances, the development of a quantum LiDAR system that simultaneously achieves high precision and a large measurement range remains challenging. Here, we demonstrate a quantum amplitude-modulated continuous wave LiDAR with micrometer precision achievable via increased acquisition time and meter-scale measurement range. In our demonstration, the signal photons directly illuminate the target, while the idler photons are non-locally modulated with a high-frequency cosine wave and never interact with the target. By leveraging the non-local modulation and the quantum correlation, the target detection is achieved with a precision of 0.64 $\pm$ 0.06 mm within one second over a measurement range of 2-8 m. As the acquisition time is up to 500 s, the system achieves a precision of 29 $\pm\ 4{\ \mathrm{μm}}$. Furthermore, our system realizes a 50 times precision improvement over the classical single-photon scheme in a background noise 37 dB stronger than the returned probe photons. With these advantages, our method will open venues for the development of high-precision, long-range, and noise-resilient target detection.

quant-pharXiv:2606.27838•Jun 29, 2026•0 citations

Target Detection Aided by Quantum Temporal Correlations: Theoretical Analysis and Experimental Validation

Han Liu, Bhashyam Balaji, Amr Saher Helmy

The detection of objects in the presence of significant background noise is a problem of fundamental interest in sensing. In this work, we theoretically analyze a prototype target detection protocol, the quantum temporal correlation (QTC) detection protocol, which is implemented in this work utilizing spontaneous parametric down-converted photon-pair sources. The QTC detection protocol only requires time-resolved photon-counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol, we also consider a classical phase-insensitive target detection protocol based on intensity detection that is practical in the optical regime. We formulated the target detection problem as a total probe photon transmission estimation problem and obtain an analytical expression of the receiver operating characteristic (ROC) curves. We carry out experiments using a semiconductor waveguide source, which we developed and previously reported. The experimental results agree very well with the theoretical prediction. In particular, we find that in a high-level environment noise and loss, the QTC detection protocol can achieve performance comparable to that of the classical protocol (that is practical in the optical regime) but with \(\simeq 57\) times lower detection time in terms of ROC curve metric. The performance of the QTC detection protocol experiment setup could be further improved with a higher transmission of the reference photon and better detector time uncertainty. Furthermore, the probe photons in the QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable as well as tunable and thus amenable to large scale integration, which is necessary for practical applications.

arXiv:2004.06765•IEEE Transactions on Aerospace and Electronic Systems•Feb 14, 2020•20 citations
Quantum enhanced optical target detection provides a unique route to increased noise resilience of classical LiDARs (laser imaging, detection, and ranging) by using time correlation of non-classical photon pairs. Such enhancement is dictated by the detector temporal uncertainty that is typically orders of magnitude larger than the intrinsic correlation time. To circumvent such detector limitation, we explore the possibility of measuring correlation in the fractional-order Fourier domain (FrFD), which can be realized with the non-local dispersion cancellation. Experimentally, we verify this principle using a fiber-coupled waveguide source of photon pairs, showing enhanced noise rejection as compared with conventional time-domain coincidence detection and classical intensity detection. For false alarm rates of 10 −9 , an 89 dB improved detection rate is measured using receiver operating characteristics when comparing our FrFD protocol with classical intensity detection. Additionally, we discussed the resilience of FrFD correlation against intentionally prepared counterfeit signal photons. The possibility enabled by measuring correlation in the FrFD should also provide potential benefit for various sensing and communication protocols that relies on coincidence detection.
Non-local effects have the potential to radically move forward quantum enhanced imaging to provide an advantage over classical imaging not only in laboratory environments but practical implementation. In this work, we demonstrate a 43dB higher signal-to-noise ratio (SNR) using a quantum enhanced LiDAR based on time-frequency entanglement compared with a classical phase-insensitive quantum imaging system. Our system can tolerate more than 3 orders of magnitude higher noise than classical single-photon counting quantum imaging systems before detector saturation with a detector dead time of 25ns. To achieve these advantages, we use non-local cancellation of dispersion to take advantage of the strong temporal correlations in photon pairs in spite of the orders of magnitude larger detector temporal uncertainty. We go on to incorporate this scheme with purpose-built scanning collection optics to image non-reflecting targets in an environment with noise.
In order to enhance LIDAR performance metrics such as target detection sensitivity, noise resilience and ranging accuracy, we exploit the strong temporal correlation within the photon pairs generated in continuous-wave pumped semiconductor waveguides. The enhancement attained through the use of such non-classical sources is measured and compared to a corresponding target detection scheme based on simple photon-counting detection. The performances of both schemes are quantified by the estimation uncertainty and Fisher information of the probe photon transmission, which is a widely adopted sensing figure of merit. The target detection experiments are conducted with high probe channel loss (≃1−5×10−5\simeq 1-5\times10^{-5}≃1−5×10−5) and formidable environment noise up to 36 dB stronger than the detected probe power of 1.64×10−51.64\times 10^{-5}1.64×10−5 pW. The experimental result shows significant advantages offered by the enhanced scheme with up to 26.3 dB higher performance in terms of estimation uncertainty, which is equivalent to a reduction of target detection time by a factor of 430 or 146 (21.6 dB) times more resilience to noise. We also experimentally demonstrated ranging with these non-classical photon pairs generated with continuous-wave pump in the presence of strong noise and loss, achieving ≈\approx≈5 cm distance resolution that is limited by the temporal resolution of the detectors.
Entanglement and correlation of quantum light can enhance LiDAR sensitivity in the presence of strong background noise. However, the power of such quantum sources is fundamentally limited to a stream of single photons and cannot compete with the detection range of high-power classical LiDAR transmitters. To circumvent this, we develop and demonstrate a quantum-inspired LiDAR prototype based on coherent measurement of classical time-frequency correlation. This system uses a high-power classical source and maintains the high noise rejection advantage of quantum LiDARs. In particular, we show that it can achieve over 100dB rejection (with 100ms integration time) of indistinguishable (with statistically identical properties in every degree of freedom) in-band noise while still being sensitive to single photon signals. In addition to the LiDAR demonstration, we also discuss the potential of the proposed LiDAR receiver for quantum information applications. In particular, we propose the chaotic quantum frequency conversion technique for coherent manipulation of high dimensional quantum states of light. It is shown that this technique can provide improved performance in terms of selectivity and efficiency as compared to pulse-based quantum frequency conversion.
Quantum light detection and ranging (LiDAR) utilizes quantum entanglement and correlation to improve precision, noise resilience and covertness of target detection. Despite recent advances, the development of a quantum LiDAR system that simultaneously achieves high precision and a large measurement range remains challenging. Here, we demonstrate a quantum amplitude-modulated continuous wave LiDAR with micrometer precision achievable via increased acquisition time and meter-scale measurement range. In our demonstration, the signal photons directly illuminate the target, while the idler photons are non-locally modulated with a high-frequency cosine wave and never interact with the target. By leveraging the non-local modulation and the quantum correlation, the target detection is achieved with a precision of 0.64 ±\pm± 0.06 mm within one second over a measurement range of 2-8 m. As the acquisition time is up to 500 s, the system achieves a precision of 29 ± 4 μm\pm\ 4{\ \mathrm{μm}}± 4 μm. Furthermore, our system realizes a 50 times precision improvement over the classical single-photon scheme in a background noise 37 dB stronger than the returned probe photons. With these advantages, our method will open venues for the development of high-precision, long-range, and noise-resilient target detection.
The detection of objects in the presence of significant background noise is a problem of fundamental interest in sensing. In this work, we theoretically analyze a prototype target detection protocol, the quantum temporal correlation (QTC) detection protocol, which is implemented in this work utilizing spontaneous parametric down-converted photon-pair sources. The QTC detection protocol only requires time-resolved photon-counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol, we also consider a classical phase-insensitive target detection protocol based on intensity detection that is practical in the optical regime. We formulated the target detection problem as a total probe photon transmission estimation problem and obtain an analytical expression of the receiver operating characteristic (ROC) curves. We carry out experiments using a semiconductor waveguide source, which we developed and previously reported. The experimental results agree very well with the theoretical prediction. In particular, we find that in a high-level environment noise and loss, the QTC detection protocol can achieve performance comparable to that of the classical protocol (that is practical in the optical regime) but with ≃57\simeq 57≃57 times lower detection time in terms of ROC curve metric. The performance of the QTC detection protocol experiment setup could be further improved with a higher transmission of the reference photon and better detector time uncertainty. Furthermore, the probe photons in the QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable as well as tunable and thus amenable to large scale integration, which is necessary for practical applications.