Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Fractal superconducting nanowire single-photon detector coupled with multi-mode optical fiber

Kai Zou, Yun Meng, Zifan Hao, Jing Li, Adrian Iovan, Thomas Descamps, Val Zwiller, Xiaolong Hu

Published Jan 1, 2024• 0 citations
Publisher

Abstract

Optical absorptance of fractal SNSPDs is insensitive to the speckles in multi-mode fiber (MMF). We demonstrate 73% system detection efficiency at 1540 nm and 69 ps timing jitter with a MMF-coupled fractal SNSPD.
DOI
10.1364/cleo_at.2024.jw2a.95

Related papers

Speckle‐Insensitive Fractal Superconducting Nanowire Single‐Photon Detector Coupled with Multimode Optical Fiber (Laser Photonics Rev. 18(10)/2024)

Kai Zou, Yun Meng, Zifan Hao +5 more

Efficiently Detecting Single Photons from Multiple Spatial Modes Speckles may reduce detection efficiency and induce modal noise in photodetection. Xiaolong Hu and co-workers (article number 2400342) show that a superconducting nanowire single-photon detector (SNSPD) patterned into the fractal geometry can be insensitive to the speckles and they demonstrate an efficient fractal SNSPD coupled with multimode fiber.

Laser & Photonics Review•Oct 1, 2024•0 citations

Speckle‐Insensitive Fractal Superconducting Nanowire Single‐Photon Detector Coupled with Multimode Optical Fiber

Kai Zou, Yun Meng, Zifan Hao +5 more

Abstract Speckles are ubiquitous phenomena associated with multi‐spatial‐mode optics, which may reduce detection efficiency and induce modal noise if the photoresponse of the detector is polarization‐dependent. Thus far, they limit the performance of superconducting nanowire single‐photon detectors (SNSPDs) coupled with multimode optical fibers (MMF). To solve this problem, here, it is shown that SNSPDs patterned into the fractal geometry is insensitive to speckles and generates minimal modal noise that would otherwise be induced by the polarization‐dependent local device efficiency of the meander and spiral SNSPDs. Using this advantageous property of the fractal SNSPDs, system detection efficiency at the wavelength of 1530 nm and 42‐ps timing jitter is demonstrated when we couple a fractal SNSPD with 50‐micrometer‐core, step‐index MMF. This work not only demonstrates a scheme to achieving high system detection efficiency for MMF‐coupled SNSPDs that can be used in many applications, but also provides insight on how engineered nanostructures of photodetectors can reduce modal noise when detecting light from multiple spatial modes.

Laser & Photonics Review•May 23, 2024•10 citations

Micro-fiber coupled superconducting nanowire single photon detector (Conference Presentation)

Lixing You

Ever since superconducting nanowire single-photon detectors (SNSPDs or SSPDs) were demonstrated, they have attracted a considerable attention due to the detectors’ promising performance that includes high detection efficiency (DE), low dark count rate (DCR), broadband sensitivity, and low timing jitter. The system detection efficiency (SDE) has been improved to be over 90% with a wavelength of 1550 nm in a fiber-coupled system by embedding the SNSPD in optical cavities. However, the implementation of optical cavity usually reduces the bandwidth of SNSPDs. As a result, there are some recent works on increasing the bandwidth of SNSPD. Furthermore, the size of the active area of meandered nanowires has to be compatible with the core size of an optical fiber such that good optical coupling can be achieved; this setup requires a long nanowire with a large kinetic inductance, thus resulting in a small counting rate and a large timing jitter, particularly for multi-mode fiber-coupled devices. Nevertheless, a particularly impressive waveguide-coupled SNSPD has been developed in recent years. By placing an SNSPD atop an optical waveguide that has been fabricated on various substrate materials, photons propagating in the waveguide have been found to be evanescently absorbed by nanowires that are only a few tens of microns long. The on-chip DE of this device has been estimated to be over 90%, thus indicating that it has both high absorptance and high intrinsic DE. If the waveguide and the nanowire are correctly dimensioned, the absorptance of this device can reach over 90% for a wavelength range of more than 700 nm. Furthermore, the length of the nanowire is shorter than that of the fiber-coupled SNSPD, thus leading to a higher count rate and lower timing jitter (~18 ps). However, unsatisfactory coupling losses between the optical fiber and the waveguide in such devices can decrease its SDE (~10%), thus limiting its applicability to quantum photonic integrated circuits (QPIC). Recently, we proposed a type of SNSPD that was coupled with microfibers (MFs), and simulations for this SNSPD indicated that its absorption would be as high as 90%. Microfibers and nanofibers, tapered adiabatically from standard fibers, with diameters close to or smaller than the wavelength of the guided light were demonstrated to have low transmittance losses by Tong et al. in 2003. MFs have been shown to have many interesting properties, such as strong evanescent fields, tight optical confinement, wideband abilities, and small masses; these properties are appealing for applications such as optical sensing and coupling. MFs also provide seamless connections with high transmittance from standard fibers; therefore, MF-coupled SNSPDs can achieve both high SDEs and wideband compatibility. We proposed and demonstrated the MF-coupled SNSPDs successfully. The simulation results indicate that with optimal device structure, the optical absorption with efficiency < 90% can be realized over a wavelength range of 350 nm to 2150 nm. The fabricated MF-coupled SNSPD, shows unparalleled broadband system detection efficiencies (SDEs) of more than 50% from 630 nm to 1500 nm. The SDEs reach 66% at 785 nm and 45% at 1550 nm. These results pave the way for ultra-broadband weak light detection with quantum-limit sensitivity.

Advanced Photon Counting Techniques•May 1, 2020•0 citations

Multimode fiber-coupled superconducting nanowire single-photon detector with 70% system efficiency at visible wavelength

Dengkuan Liu, Shigehito Miki, Taro Yamashita +3 more

We report the development of the multimode fiber-coupled superconducting nanowire single-photon detector with high system detection efficiency at visible wavelength. The detector consists of a 10.5-nm-thick and 150-nm-wide NbN nanowire meander fabricated on a Si substrate with a multilayer dielectric mirror and a quarter wavelength cavity for obtaining high optical absorptance. The meander area was 35 µm in diameter and coupled with the GRIN-lensed multimode optical fiber with a core diameter of 50 µm. The system reached detection efficiency of 70% with dark count rate of 100 Hz at the wavelength of 635 nm, 3 dB roll-off response counting rate of 8.5 Mcps, and timing jitter of 76 ps.

Optics Express•Aug 25, 2014•37 citations

Fractal superconducting nanowires detect infrared single photons with 91% polarization-independent system efficiency and 19 ps timing resolution

Yun Meng, Kai Zou, Nan Hu +6 more

The near-unity detection efficiency and excellent timing resolution of superconducting nanowire single-photon detectors (SNSPDs), combined with their other merits, have enabled many classical and quantum photonic applications. However, the prevalent design based on meandering nanowires makes the detection efficiency dependent on the polarization states of the incident photons; for unpolarized light, the major merit of high detection efficiency would get compromised, which could be detrimental for photon-starved applications. In quantum-key distribution systems, the polarization dependence of detection efficiency of the SNSPDs could also be a vulnerable security loophole. Here, we create SNSPDs with an arced fractal topology that almost completely eliminates this polarization dependence of the detection efficiency while preserving other major merits of the SNSPDs. We experimentally demonstrated 91$\pm$2% system detection efficiency at the wavelength of 1590 nm for photons in any polarization state and 19 ps timing jitter. The detector was fiber-coupled and fully packaged in a 0.1-W close-cycled Gifford-McMahon cryocooler. This demonstration provides a novel, practical device structure of SNSPDs, allowing for operation in the visible, near- and mid-infrared spectral ranges, and paves the way for polarization-insensitive single-photon detection with high detection efficiency and high timing resolution.

•Dec 12, 2020•2 citations

Timing Jitter of Fractal Superconducting Nanowire Avalanche Photodetectors in the 2-Micrometer Wavelength Range

Liang Xu, Yun Meng, Kai Zou +6 more

We developed a femtosecond, mode-locked thulium-doped fiber l aser t o characterize fractal superconducting nanowire single-photon detectors at 1993 nm. The lowest timing jitter was 64.8 ps, which should be compared with 29.2 ps at 1560 nm.

Conference on Lasers and Electro-Optics•Jan 1, 2021•0 citations
Abstract Speckles are ubiquitous phenomena associated with multi‐spatial‐mode optics, which may reduce detection efficiency and induce modal noise if the photoresponse of the detector is polarization‐dependent. Thus far, they limit the performance of superconducting nanowire single‐photon detectors (SNSPDs) coupled with multimode optical fibers (MMF). To solve this problem, here, it is shown that SNSPDs patterned into the fractal geometry is insensitive to speckles and generates minimal modal noise that would otherwise be induced by the polarization‐dependent local device efficiency of the meander and spiral SNSPDs. Using this advantageous property of the fractal SNSPDs, system detection efficiency at the wavelength of 1530 nm and 42‐ps timing jitter is demonstrated when we couple a fractal SNSPD with 50‐micrometer‐core, step‐index MMF. This work not only demonstrates a scheme to achieving high system detection efficiency for MMF‐coupled SNSPDs that can be used in many applications, but also provides insight on how engineered nanostructures of photodetectors can reduce modal noise when detecting light from multiple spatial modes.
Ever since superconducting nanowire single-photon detectors (SNSPDs or SSPDs) were demonstrated, they have attracted a considerable attention due to the detectors’ promising performance that includes high detection efficiency (DE), low dark count rate (DCR), broadband sensitivity, and low timing jitter. The system detection efficiency (SDE) has been improved to be over 90% with a wavelength of 1550 nm in a fiber-coupled system by embedding the SNSPD in optical cavities. However, the implementation of optical cavity usually reduces the bandwidth of SNSPDs. As a result, there are some recent works on increasing the bandwidth of SNSPD. Furthermore, the size of the active area of meandered nanowires has to be compatible with the core size of an optical fiber such that good optical coupling can be achieved; this setup requires a long nanowire with a large kinetic inductance, thus resulting in a small counting rate and a large timing jitter, particularly for multi-mode fiber-coupled devices. Nevertheless, a particularly impressive waveguide-coupled SNSPD has been developed in recent years. By placing an SNSPD atop an optical waveguide that has been fabricated on various substrate materials, photons propagating in the waveguide have been found to be evanescently absorbed by nanowires that are only a few tens of microns long. The on-chip DE of this device has been estimated to be over 90%, thus indicating that it has both high absorptance and high intrinsic DE. If the waveguide and the nanowire are correctly dimensioned, the absorptance of this device can reach over 90% for a wavelength range of more than 700 nm. Furthermore, the length of the nanowire is shorter than that of the fiber-coupled SNSPD, thus leading to a higher count rate and lower timing jitter (~18 ps). However, unsatisfactory coupling losses between the optical fiber and the waveguide in such devices can decrease its SDE (~10%), thus limiting its applicability to quantum photonic integrated circuits (QPIC). Recently, we proposed a type of SNSPD that was coupled with microfibers (MFs), and simulations for this SNSPD indicated that its absorption would be as high as 90%. Microfibers and nanofibers, tapered adiabatically from standard fibers, with diameters close to or smaller than the wavelength of the guided light were demonstrated to have low transmittance losses by Tong et al. in 2003. MFs have been shown to have many interesting properties, such as strong evanescent fields, tight optical confinement, wideband abilities, and small masses; these properties are appealing for applications such as optical sensing and coupling. MFs also provide seamless connections with high transmittance from standard fibers; therefore, MF-coupled SNSPDs can achieve both high SDEs and wideband compatibility. We proposed and demonstrated the MF-coupled SNSPDs successfully. The simulation results indicate that with optimal device structure, the optical absorption with efficiency < 90% can be realized over a wavelength range of 350 nm to 2150 nm. The fabricated MF-coupled SNSPD, shows unparalleled broadband system detection efficiencies (SDEs) of more than 50% from 630 nm to 1500 nm. The SDEs reach 66% at 785 nm and 45% at 1550 nm. These results pave the way for ultra-broadband weak light detection with quantum-limit sensitivity.
We report the development of the multimode fiber-coupled superconducting nanowire single-photon detector with high system detection efficiency at visible wavelength. The detector consists of a 10.5-nm-thick and 150-nm-wide NbN nanowire meander fabricated on a Si substrate with a multilayer dielectric mirror and a quarter wavelength cavity for obtaining high optical absorptance. The meander area was 35 µm in diameter and coupled with the GRIN-lensed multimode optical fiber with a core diameter of 50 µm. The system reached detection efficiency of 70% with dark count rate of 100 Hz at the wavelength of 635 nm, 3 dB roll-off response counting rate of 8.5 Mcps, and timing jitter of 76 ps.
The near-unity detection efficiency and excellent timing resolution of superconducting nanowire single-photon detectors (SNSPDs), combined with their other merits, have enabled many classical and quantum photonic applications. However, the prevalent design based on meandering nanowires makes the detection efficiency dependent on the polarization states of the incident photons; for unpolarized light, the major merit of high detection efficiency would get compromised, which could be detrimental for photon-starved applications. In quantum-key distribution systems, the polarization dependence of detection efficiency of the SNSPDs could also be a vulnerable security loophole. Here, we create SNSPDs with an arced fractal topology that almost completely eliminates this polarization dependence of the detection efficiency while preserving other major merits of the SNSPDs. We experimentally demonstrated 91$\pm$2% system detection efficiency at the wavelength of 1590 nm for photons in any polarization state and 19 ps timing jitter. The detector was fiber-coupled and fully packaged in a 0.1-W close-cycled Gifford-McMahon cryocooler. This demonstration provides a novel, practical device structure of SNSPDs, allowing for operation in the visible, near- and mid-infrared spectral ranges, and paves the way for polarization-insensitive single-photon detection with high detection efficiency and high timing resolution.