Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Precision Electromagnetic Measurements

300 mV Josephson Arbitrary Waveform Synthesizer Chip in NIM

Yuan Zhong, Qing Zhong, Wenhui Cao, Jinjin Li, Kunli Zhou, Jifeng Qu

Published Jul 8, 2024• 1 citation
Publisher

Abstract

This paper describes the current status of developing Josephson arbitrary waveform synthesizer (JAWS) chips in NIM (National Institute of Metrology, China). The chip has one data input channel and two Josephson junction arrays, each array consisted by 4000 double-stack Nb/NbxSi1–x/Nb junctions. The two arrays were driven with a single pulse-generator channel by using one on-chip Wilkinson power divider and inside/outside DC blocks. Root-mean-square (rms) output magnitude of 300 mV was generated with this JAWS chip.

DOI
10.1109/cpem61406.2024.10645987

Related papers

A 300 mV Josephson Arbitrary Waveform Synthesizer Chip at NIM

Weiyuan Jia, Jiuhui Song, Yuan Zhong +7 more

This paper describes the status of developing Josephson arbitrary waveform synthesizer (JAWS) chips at NIM (National Institute of Metrology, China). To obtain high junction integration density and fewer data input channels, the chip employs an on-chip Wilkinson power divider and inside/outside dc blocks, enabling both arrays to be driven by a single pulse-generator channel. In addition, the tapered coplanar waveguide structure is used to ensure the microwave uniformity of the long-junction array. Each array consisted of 4000 double-stack Nb/NbxSi1−x/Nb junctions, and 16,000 junctions are integrated in the chip in total. The JAWS chip demonstrates good performance, capable of synthesizing a 300 mV root mean square (rms) voltage with exceptionally low harmonic distortion. Dc and ac voltage-current characteristics measurements indicate that the junctions are with a critical current of 2.5 mA, and a normal-state resistance of 4.5 mΩ per junction. Contact aligners are manually operated to fabricate the chips, and process errors in the fabrication are estimated in this paper.

Applied Sciences•Nov 5, 2025•1 citation

Two-Volt Josephson Arbitrary Waveform Synthesizer Using Wilkinson Dividers

Nathan E. Flowers-Jacobs, Anna E. Fox, Paul D. Dresselhaus +2 more

The root-mean-square (rms) output voltage of the NIST Josephson arbitrary waveform synthesizer (JAWS) has been doubled from 1 V to a record 2 V by combining two new 1 V chips on a cryocooler. This higher voltage will improve calibrations of ac thermal voltage converters and precision voltage measurements that require state-of-the-art quantum accuracy, stability, and signal-to-noise ratio. We achieved this increase in output voltage by using four on-chip Wilkinson dividers and eight inner-outer dc blocks, which enable biasing of eight Josephson junction (JJ) arrays with high-speed inputs from only four high-speed pulse generator channels. This approach halves the number of pulse generator channels required in future JAWS systems. We also implemented on-chip superconducting interconnects between JJ arrays, which reduces systematic errors and enables a new modular chip package. Finally, we demonstrate a new technique for measuring and visualizing the operating current range that reduces the measurement time by almost two orders of magnitude and reveals the relationship between distortion in the output spectrum and output pulse sequence errors.

IEEE Transactions on Applied Superconductivity•Feb 19, 2016•76 citations

Towards a 1 V Josephson Arbitrary Waveform Synthesizer

Oliver Kieler, Ralf Behr, Ruediger Wendisch +3 more

The establishment at PTB of an AC Josephson voltage standard (Josephson Arbitrary Waveform Synthesizer- JAWS) based on pulse-driven Josephson arrays is focused on achieving an output voltage of at least 1 Vrms which is required for many metrology applications. In this paper, we approached this goal by increasing the number of active junctions in two ways. Firstly, we fabricated arrays containing triple-stacked SNS-type Josephson junctions with NbxSi1-xas barrier material. We obtained current operation margins of about 0.2 mA with arrays of up to 9000 Josephson junctions at an rms voltage of 355 mV. Secondly, we used a new 8-channel ternary pulse pattern generator (PPG) to bias up to 8 arrays connected in series. An output voltage of VRMS= 1006 mV(VPP= 2.845 V) was achieved by using 8 arrays (arranged on 4 separate chips) with 63000 junctions in total. Higher harmonics are suppressed by at least -116 dBc. The fabrication process and the experimental setup will be described, as well as experimental results that are leading towards our 1 V goal.

IEEE Transactions on Applied Superconductivity•Nov 10, 2014•97 citations

Pulse-Bias Electronics and Techniques for a Josephson Arbitrary Waveform Synthesizer

Samuel P. Benz, Steven B. Waltman

The Josephson arbitrary waveform synthesizer (JAWS) is a series array of thousands of superconducting Josephson junctions that are biased by current pulses such that the array produces voltage waveforms with quantum accuracy. Intrinsically accurate voltage waveforms synthesized with the quantized pulses from Josephson junctions were first demonstrated in 1996. Ten years later, a commercial ac standard was calibrated at an output root-mean-square (RMS) amplitude of 100 mV with the first practical superconducting digital-to-analog converter. Since then, many different bias techniques, pulse-drive electronics, and device technology have been developed and improved in order to achieve a maximum of 138 mV output RMS voltage per Josephson array. In this paper, we report new bias electronics and demonstrate two new pulse-bias techniques. The first technique has demonstrated 250 mV output RMS voltage per 6400-junction array and may enable a practical 1 V system with only four arrays. The second bias technique reduces inductance-related error signals at the signal frequency and should reduce systematic errors for waveforms with frequencies greater than 1 MHz.

IEEE Transactions on Applied Superconductivity•Jul 11, 2014•40 citations

Josephson Arbitrary Waveform Synthesizer With Two Layers of Wilkinson Dividers and an FIR Filter

Nathan E. Flowers-Jacobs, Steven B. Waltman, Anna E. Fox +2 more

The output voltage of Josephson arbitrary waveform synthesizers (JAWS) is limited by the number of Josephson junctions (JJs) that can be driven by a single pulse-generator channel. Here, we double the number of JJs driven by one generator channel to 51 200 JJs by distributing the pulse bias between four JJ arrays by use of two layers of Wilkinson dividers. We use this single bias to generate a voltage at 1 kHz with an rms magnitude of 1 V. This voltage is quantum-accurate over an operating current range of 1.4 mA. For comparison, the operating current range of a recent design that uses a single layer of Wilkinson dividers is twice as large, but requires two pulse-bias channels to generate 1 V. We also show that we can recover this performance by incorporating in the pulse generator a finite-impulse response (FIR) filter that acts as an equalizer. The FIR filter creates a custom transfer function that compensates for the bandwidth-limited transfer function of the Wilkinson dividers. Optimizing the FIR filter parameters increases the operating current range from 1.4 to 2.7 mA. This ability to drive additional JJ arrays with a single pulse-generator channel will enable future JAWS chips and systems to achieve significantly larger output voltages. This will increase the voltage range for JAWS calibrations of ac thermal converters and improve precision voltage measurements that require quantum-accurate, stable, and distortion-free waveforms with a large signal-to-noise ratio.

IEEE Transactions on Applied Superconductivity•Jun 23, 2016•32 citations

Development of josephson arbitrary waveform synthesizer at physikalisch-Technische bundesanstalt (PTB)

Oliver Kieler

This paper presents the basic principle of the pulse-driven ac Josephson voltage standard, also called “Josephson arbitrary waveform synthesizer” (JAWS). We will mainly focus on activities and developments at the Physikalisch-Technische Bundesanstalt (PTB). The JAWS is suitable to generate high precision quantized waveforms, which can be arbitrarily programmed in the frequency and time domain with extremely high spectral purity (typical signal-to-noise ratios SNR of 120–140 dBc). A brief overview of the fabrication technology for highly integrated JAWS circuits with more than 50 000 junctions per chip will be described. This includes the stacked junction technology with up to 5-stacked junctions. The experimental setup and the key-features of JAWS will be shown too. New approaches designed to further increase the output voltage, to simplify the experimental setup, and to extend the range of applications are the on-chip power dividers, the optical pulse drive, and the RF-JAWS. A selected application of the JAWS is described to demonstrate the usability of sophisticated JAWS waveforms for the complex characterization of electrical devices. The PTB JAWS circuits already have a significant impact on the quantum ac voltage metrology community. JAWS chips made at PTB have been distributed to more than 10 national metrology and other research institutes within the framework of international research projects.

Low Temperature Physics•Nov 1, 2024•6 citations
This paper describes the current status of developing Josephson arbitrary waveform synthesizer (JAWS) chips in NIM (National Institute of Metrology, China). The chip has one data input channel and two Josephson junction arrays, each array consisted by 4000 double-stack Nb/NbxSi1–x/Nb junctions. The two arrays were driven with a single pulse-generator channel by using one on-chip Wilkinson power divider and inside/outside DC blocks. Root-mean-square (rms) output magnitude of 300 mV was generated with this JAWS chip.
This paper describes the status of developing Josephson arbitrary waveform synthesizer (JAWS) chips at NIM (National Institute of Metrology, China). To obtain high junction integration density and fewer data input channels, the chip employs an on-chip Wilkinson power divider and inside/outside dc blocks, enabling both arrays to be driven by a single pulse-generator channel. In addition, the tapered coplanar waveguide structure is used to ensure the microwave uniformity of the long-junction array. Each array consisted of 4000 double-stack Nb/NbxSi1−x/Nb junctions, and 16,000 junctions are integrated in the chip in total. The JAWS chip demonstrates good performance, capable of synthesizing a 300 mV root mean square (rms) voltage with exceptionally low harmonic distortion. Dc and ac voltage-current characteristics measurements indicate that the junctions are with a critical current of 2.5 mA, and a normal-state resistance of 4.5 mΩ per junction. Contact aligners are manually operated to fabricate the chips, and process errors in the fabrication are estimated in this paper.
The root-mean-square (rms) output voltage of the NIST Josephson arbitrary waveform synthesizer (JAWS) has been doubled from 1 V to a record 2 V by combining two new 1 V chips on a cryocooler. This higher voltage will improve calibrations of ac thermal voltage converters and precision voltage measurements that require state-of-the-art quantum accuracy, stability, and signal-to-noise ratio. We achieved this increase in output voltage by using four on-chip Wilkinson dividers and eight inner-outer dc blocks, which enable biasing of eight Josephson junction (JJ) arrays with high-speed inputs from only four high-speed pulse generator channels. This approach halves the number of pulse generator channels required in future JAWS systems. We also implemented on-chip superconducting interconnects between JJ arrays, which reduces systematic errors and enables a new modular chip package. Finally, we demonstrate a new technique for measuring and visualizing the operating current range that reduces the measurement time by almost two orders of magnitude and reveals the relationship between distortion in the output spectrum and output pulse sequence errors.
The establishment at PTB of an AC Josephson voltage standard (Josephson Arbitrary Waveform Synthesizer- JAWS) based on pulse-driven Josephson arrays is focused on achieving an output voltage of at least 1 Vrms which is required for many metrology applications. In this paper, we approached this goal by increasing the number of active junctions in two ways. Firstly, we fabricated arrays containing triple-stacked SNS-type Josephson junctions with NbxSi1-xas barrier material. We obtained current operation margins of about 0.2 mA with arrays of up to 9000 Josephson junctions at an rms voltage of 355 mV. Secondly, we used a new 8-channel ternary pulse pattern generator (PPG) to bias up to 8 arrays connected in series. An output voltage of VRMS= 1006 mV(VPP= 2.845 V) was achieved by using 8 arrays (arranged on 4 separate chips) with 63000 junctions in total. Higher harmonics are suppressed by at least -116 dBc. The fabrication process and the experimental setup will be described, as well as experimental results that are leading towards our 1 V goal.
The Josephson arbitrary waveform synthesizer (JAWS) is a series array of thousands of superconducting Josephson junctions that are biased by current pulses such that the array produces voltage waveforms with quantum accuracy. Intrinsically accurate voltage waveforms synthesized with the quantized pulses from Josephson junctions were first demonstrated in 1996. Ten years later, a commercial ac standard was calibrated at an output root-mean-square (RMS) amplitude of 100 mV with the first practical superconducting digital-to-analog converter. Since then, many different bias techniques, pulse-drive electronics, and device technology have been developed and improved in order to achieve a maximum of 138 mV output RMS voltage per Josephson array. In this paper, we report new bias electronics and demonstrate two new pulse-bias techniques. The first technique has demonstrated 250 mV output RMS voltage per 6400-junction array and may enable a practical 1 V system with only four arrays. The second bias technique reduces inductance-related error signals at the signal frequency and should reduce systematic errors for waveforms with frequencies greater than 1 MHz.
The output voltage of Josephson arbitrary waveform synthesizers (JAWS) is limited by the number of Josephson junctions (JJs) that can be driven by a single pulse-generator channel. Here, we double the number of JJs driven by one generator channel to 51 200 JJs by distributing the pulse bias between four JJ arrays by use of two layers of Wilkinson dividers. We use this single bias to generate a voltage at 1 kHz with an rms magnitude of 1 V. This voltage is quantum-accurate over an operating current range of 1.4 mA. For comparison, the operating current range of a recent design that uses a single layer of Wilkinson dividers is twice as large, but requires two pulse-bias channels to generate 1 V. We also show that we can recover this performance by incorporating in the pulse generator a finite-impulse response (FIR) filter that acts as an equalizer. The FIR filter creates a custom transfer function that compensates for the bandwidth-limited transfer function of the Wilkinson dividers. Optimizing the FIR filter parameters increases the operating current range from 1.4 to 2.7 mA. This ability to drive additional JJ arrays with a single pulse-generator channel will enable future JAWS chips and systems to achieve significantly larger output voltages. This will increase the voltage range for JAWS calibrations of ac thermal converters and improve precision voltage measurements that require quantum-accurate, stable, and distortion-free waveforms with a large signal-to-noise ratio.
This paper presents the basic principle of the pulse-driven ac Josephson voltage standard, also called “Josephson arbitrary waveform synthesizer” (JAWS). We will mainly focus on activities and developments at the Physikalisch-Technische Bundesanstalt (PTB). The JAWS is suitable to generate high precision quantized waveforms, which can be arbitrarily programmed in the frequency and time domain with extremely high spectral purity (typical signal-to-noise ratios SNR of 120–140 dBc). A brief overview of the fabrication technology for highly integrated JAWS circuits with more than 50 000 junctions per chip will be described. This includes the stacked junction technology with up to 5-stacked junctions. The experimental setup and the key-features of JAWS will be shown too. New approaches designed to further increase the output voltage, to simplify the experimental setup, and to extend the range of applications are the on-chip power dividers, the optical pulse drive, and the RF-JAWS. A selected application of the JAWS is described to demonstrate the usability of sophisticated JAWS waveforms for the complex characterization of electrical devices. The PTB JAWS circuits already have a significant impact on the quantum ac voltage metrology community. JAWS chips made at PTB have been distributed to more than 10 national metrology and other research institutes within the framework of international research projects.