To address the potential threat to the power grid industry posed by quantum computers and ensure the security of bidirectional communication in smart grids, it is imperative to develop quantum-safe authentication protocols. This paper proposes a semi-quantum bidirectional authentication protocol between a control center (CC) and a neighboring gateway (NG). This method uses single photons to facilitate communication between the CC and the NG. Security analysis demonstrates that the protocol can effectively resist common attack methods, including double CNOT attacks, impersonation attacks, interception-measurement-retransmission attacks, and entanglement-measurement attacks. Comparisons with other protocols reveal that this protocol has significant advantages, making it more appealing and practical for real-world applications. Finally, by simulating the protocol on the IBM quantum simulator, this protocol not only validates the theoretical framework but also confirms the practical feasibility of the protocol.
To address the potential threat to the power grid industry posed by quantum computers and ensure the security of bidirectional communication in smart grids, it is imperative to develop quantum-safe authentication protocols. This paper proposes a semi-quantum bidirectional authentication protocol between a control center (CC) and a neighboring gateway (NG). This method uses single photons to facilitate communication between the CC and the NG. Security analysis demonstrates that the protocol can effectively resist common attack methods, including double CNOT attacks, impersonation attacks, interception-measurement-retransmission attacks, and entanglement-measurement attacks. Comparisons with other protocols reveal that this protocol has significant advantages, making it more appealing and practical for real-world applications. Finally, by simulating the protocol on the IBM quantum simulator, this protocol not only validates the theoretical framework but also confirms the practical feasibility of the protocol.
This paper is concerned with the privacy-preserving bidirectional electric power data transmission problem of the smart grid. A privacy-preserving bidirectional data transmission (BDT) protocol is developed over semi-quantum computation with aim to achieve bidirectional sensitive data flow between power suppliers and users. The minimal quantum cost is pursued under practical constraints while ensuring that power sensitive information is not leaked. To achieve the goal, a two-way data transmission protocol is first proposed that combines mutual identity authentication with message authentication for the benefits of enhanced security. Furthermore, for the preservation of privacy, a semi-quantum duplex communication approach is utilized, wherein the quantum state is randomly divided into two parts: teleportation and measurement qubits. The effectiveness of the privacy-preserving scheme against existing attack strategies is also rigorously analyzed. Lastly, simulation studies conducted on the IBM quantum cloud platform validate and underscore the superiority of the developed privacy-preserving BDT protocol.
The Smart Grid (SG) represents the next-generation power system in the future grid infrastructure, designed for self-healing, adaptability, and sustainability. However, the interconnected and geographically dispersed nature of SG systems introduces cybersecurity risks, potentially leading to severe incidents. Cyber attacks on SG applications could result in significant events, including outages and infrastructure damage. These attacks may compromise energy data, starting with the leakage of personal information from grid members. To address these risks, confidentiality, device authentication, and data integrity are essential, traditionally implemented through public-key cryptography (PKC). The rise of quantum computers and the potential adaptation of algorithms like Shor’s poses a threat to PKC algorithms in SG communications. In response, we propose a security protocol for post-quantum communication in SG applications, ensuring resilience against classical and quantum attacks. The protocol has been tested through rigorous informal security analysis, and comparative analysis demonstrates its scalability and effectiveness in real-world scenarios.
The smart grid (SG) embodies the future of power systems, featuring self-healing mechanisms, adaptability, and sustainability. Nevertheless, its interconnected and widely distributed architecture presents substantial cybersecurity challenges, rendering it susceptible to cyber attacks that may cause outages, infrastructure failures, and data breaches, including the exposure of personal information. Public-key cryptography (PKC) has historically been utilized to ensure confidentiality, authenticate devices, and maintain data integrity. However, the rise of quantum computing poses a serious threat to the viability of these PKC algorithms, particularly with the potential implementation of algorithms such as Shor’s algorithm. To address these vulnerabilities, we propose an innovative security protocol for post-quantum communication within SG applications, engineered to resist both classical and quantum threats. Our comparative study reveals that this protocol delivers enhanced security and improved functionality while maintaining low communication and computational costs compared to existing methods. We further demonstrate its practicality through real-time testbed experiments and implementations on a Raspberry Pi, supported by an extensive security assessment using the Scyther automated validation tool. A detailed comparison with Kyber in terms of computational efficiency, storage requirements, and implementation overhead to support our lightweight claim. Finally, a network simulation conducted using Network Simulator 3 (NS3) further demonstrates the performance of the proposed scheme, highlighting its scalability and reliability.
The key management faces significant challenges in terms of efficiency, scalability, and quantum resistance in smart grid environments. This paper addresses these challenges by proposing a novel mutual authentication and key agreement (AKA) protocol for the Noisy Intermediate-Scale Quantum (NISQ) era. The protocol integrates quantum and classical information streams, enabling secure key agreement without third-party reliance. For the first time, quantum-based mutual identity authentication is applied to smart grid security, with a comprehensive analysis of resilience against various attacks, including man-in-the-middle, quantum computation, relay, impersonation, and DoS. Experimental results show that the scheme achieves a communication cost of 0.9 KB for 2 rounds, outperforming quantum-resistant schemes (2.5 KB) and performing similarly to classical schemes (1.2 KB). The scheme requires 2 quantum preparations and 1 measurement, offering higher efficiency compared to quantum-resistant methods. Compared to QKD and computational hardness-based models, our approach provides superior key management efficiency, practical implementation in non-fault-tolerant quantum systems, and enhanced security protection. Rigorous analysis and validation using IBM’s quantum-enabled environments demonstrate the robustness of the protocol in addressing modern smart grid security challenges.
The development and evolution of the smart grid into complex, cyber-physical energy systems make it essential to secure?communication among the distributed components. The rise of quantum computing has made it even more pressing to develop protocols that?are secure outside the limitations of classical cryptosystems. In this paper, it proposes a quantum-assisting secure communication scheme (QASCP) to?boost the security and energy for smart grid communication systems. The proposed protocol combines quantum key distribution with lightweight entropy-based mutual authentication and dynamic session management. It is designed to defend grid assets such as control centers, smart meters, and distribute energy?resources from sophisticated adversarial models, including quantum-capable threats. The approach consists of system level simulation utilizing a?co-simulation framework customized for quantum smart grid communication. The performance of this scheme was compared?against classical and PQ lattice-based schemes in terms of the authentication latency, energy consumption, entropy preservation, and scalability to handle the load and delay effects, under the assumptions of different loading and delay scenarios. Simulation results show that QASCP is able to reduce the energy consumption and authenticity latency, simultaneously it keeps the high throughput and leaves strong entropy?under attack scenarios. The protocol is also shown to?remain robust with varying quantum bit error rates as well as having a smaller memory footprint on popular network topologies. The results provide evidence for the practical integration of?quantum-secure communication in smart grid architectures. By addressing security and performance simultaneously, the protocol?provides a path to future-proof energy networks which can support dependable operations in a quantum-enhanced environment. This could be future enhance for energy efficiency.
The incorporation of Electric Vehicles into smart grid networks poses great cybersecurity threats, especially with respect to the secure authentication of devices and communications between charging stations, electric vehicles, and grid operators. Conventional cryptography methods like RSA and ECC are susceptible to quantum computing attacks, which call for the implementation of post-quantum cryptography in order to make these systems quantum-resistant. This paper discusses need and imminence of post-quantum cryptography-based authentication mechanisms for improving the security of smart grid infrastructure that facilitates Electric Vehicles operation and charging stations. It introduces the existing authentication protocols, their shortcomings from a quantum threat perspective, and suggests a framework using quantum-resistant algorithms for authenticating devices, exchanging keys, and ensuring data integrity. Moreover, we tackle scalability, efficiency, and standardization issues regarding the deployment of PQC-based solutions in large-scale smart grid settings. This research identifies the compelling need for secure, quantum-resistant authentication systems to protect the increasing overlap of electric vehicles and smart grid networks, with a view to maintaining secure, reliable, and future-proof energy infrastructures.