Programmable multiphoton quantum interference in a single spatial mode
Lorenzo Carosini, Virginia Oddi, Francesco Giorgino, L. M. Hansen, Benoît Seron, Simone Piacentini, Tobias Guggemos, Iris Agresti, J. C. Loredo, Philip John Walther
The interference of nonclassical states of light enables quantum-enhanced applications reaching from metrology to computation. Most commonly, the polarization or spatial location of single photons are used as addressable degrees of freedom for turning these applications into praxis. However, the scale-up for the processing of a large number of photons of these architectures is very resource-demanding due to the rapidly increasing number of components, such as optical elements, photon sources, and detectors. Here, we demonstrate a resource-efficient architecture for multiphoton processing based on time-bin encoding in a single spatial mode. We use an efficient quantum dot single-photon source and a fast programmable time-bin interferometer to observe the interference of up to eight photons in 16 modes, all recorded only with one detector, thus considerably reducing the physical overhead previously needed for achieving equivalent tasks. Our results can form the basis for a future universal photonics quantum processor operating in a single spatial mode.
The interference of nonclassical states of light enables quantum-enhanced applications reaching from metrology to computation. Most commonly, the polarization or spatial location of single photons are used as addressable degrees of freedom for turning these applications into praxis. However, the scale-up for the processing of a large number of photons of these architectures is very resource-demanding due to the rapidly increasing number of components, such as optical elements, photon sources, and detectors. Here, we demonstrate a resource-efficient architecture for multiphoton processing based on time-bin encoding in a single spatial mode. We use an efficient quantum dot single-photon source and a fast programmable time-bin interferometer to observe the interference of up to eight photons in 16 modes, all recorded only with one detector, thus considerably reducing the physical overhead previously needed for achieving equivalent tasks. Our results can form the basis for a future universal photonics quantum processor operating in a single spatial mode.
The interference of non-classical states of light enables quantum-enhanced applications reaching from metrology to computation. Most commonly, the polarisation or spatial location of single photons are used as addressable degrees-of-freedom for turning these applications into praxis. However, the scale-up for the processing of a large number of photons of such architectures is very resource demanding due to the rapidily increasing number of components, such as optical elements, photon sources and detectors. Here we demonstrate a resource-efficient architecture for multi-photon processing based on time-bin encoding in a single spatial mode. We employ an efficient quantum dot single-photon source, and a fast programmable time-bin interferometer, to observe the interference of up to 8 photons in 16 modes, all recorded only with one detector--thus considerably reducing the physical overhead previously needed for achieving equivalent tasks. Our results can form the basis for a future universal photonics quantum processor operating in a single spatial mode.
Multiphoton interference is crucial to many photonic quantum technologies. In particular, interference forms the basis of optical quantum information processing platforms and can lead to significant computational advantages. It is therefore interesting to study the interference arising from various states of light in large interferometric networks. Here, we implement a quantum walk in a highly stable, low-loss, multiport interferometer with up to 12 ultrafast time bins. This time-bin interferometer comprises a sequence of birefringent crystals that produce pulses separated by 4.3 ps, all along a single optical axis. Ultrafast Kerr gating in an optical fiber is employed to time-demultiplex the output from the quantum walk. We measure one-, two-, and three-photon output states arising from various input state combinations, including a heralded single-photon state, a thermal state, and an attenuated coherent state at one or more input ports. Our results demonstrate that ultrafast time bins are a promising platform to observe large-scale multiphoton interference.
Quantum technologies promise computational capabilities beyond the reach of classical systems. A forward-looking application lies in satellite missions, which increasingly depend on onboard computing under stringent constraints on size, weight and power. Quantum photonics is particularly attractive here: photon interference can enhance the machine-learning models needed to process large onboard data volumes, at fixed hardware resources. However, harnessing this interference requires more than generating single photons, as they must remain mutually indistinguishable: a fragile condition that is hard to maintain within the technically demanding framework of a space mission, which includes a rocket launch, strong thermal drifts, and radiation. This is why quantum states of light, though already generated and transmitted in orbit for secure communication and fundamental tests, have never been used as a computational resource. Here, we report a programmable quantum photonic platform operating on a nanosatellite, processing two photons in a six-mode universal integrated circuit. By programming distinct unitaries and tuning the photons into indistinguishability, we observe two-photon interference, establishing the on-board generation, manipulation and detection of non-classical light. This extends space-based technologies towards in-orbit quantum-assisted computing, for instance local encoding of Earth-observation data, or nodes in a distributed quantum network.
The temporal degree-of-freedom of light is incredibly powerful for modern quantum technologies, enabling large-scale quantum computing architectures and record key-rates in quantum key distribution. However, the generalized measurement of large and complex quantum superpositions of the time-of-arrival of a photon remains a unique experimental challenge. Conventional methods based on unbalanced Franson-type interferometers scale poorly with dimension, requiring multiple cascaded devices and active phase stabilization. In addition, these are limited by construction to a restricted set of phase-only superposition measurements. Here we show how the coupling of spatial and temporal information inside a single multi-mode fiber can be harnessed to program completely generalized measurements for high-dimensional superpositions of photonic time-bin. Using the multi-spectral transmission matrix of the fiber, we find special sets of spatial modes that experience distinct dispersive delays through the fiber. By exciting coherent superpositions of these spatial modes, we engineer the equivalent of large, unbalanced multi-mode interferometers inside the fiber and use them to perform high-quality measurements of arbitrary time-bin superpositions in up to dimension 11. The single fiber functions as a scalable, common-path interferometer for time-bin qudits that significantly eases the experimental overheads of standard approaches based on unbalanced Franson-type interferometers, serving as an essential tool for quantum technologies that harness the temporal properties of light.
Multiphoton interference is crucial to many photonic quantum technologies. In particular, interference forms the basis of optical quantum information processing platforms and can lead to significant computational advantages. It is therefore interesting to study the interference arising from various states of light in large interferometric networks. Here, we implement a quantum walk in a highly stable, low-loss, multiport interferometer with up to 24 ultrafast time bins. This time-bin interferometer comprises a sequence of birefringent crystals which produce pulses separated by 4.3\,ps, all along a single optical axis. Ultrafast Kerr gating in an optical fiber is employed to time-demultiplex the output from the quantum walk. We measure one-, two-, and three-photon interference arising from various input state combinations, including a heralded single-photon state, a thermal state, and an attenuated coherent state at one or more input ports. Our results demonstrate that ultrafast time bins are a promising platform to observe large-scale multiphoton interference.
Current photon entangling schemes require resources that grow with the photon number. We present a new approach that generates quantum entanglement between many photons, using only a single source of entangled photon pairs. The different spatial modes, one for each photon as required by other schemes, are replaced by different time slots of only two spatial modes. States of any number of photons are generated with the same setup, solving the scalability problem caused by the previous need for extra resources. Consequently, entangled photon states of larger numbers than before are practically realizable.