Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Problems of Information Transmission

Time Synchronization in Satellite Quantum Key Distribution

Alexander V. Miller

Published Dec 1, 2023• 4 citations
Publisher

Abstract

Time synchronization is one of the most crucial issues that must be addressed in developing quantum key distribution (QKD) systems. It not only lets the transmitter and the receiver to assign a sequence number to each event and then do correct basis reconciliation, but also allows to increase signal-to-noise ratio. Time synchronization in satellite communications is especially complicated due to such factors as high loss, signal fading, and Doppler effect. In this work, a simple, efficient, and robust algorithm for time synchronization is proposed. It was tested during experiments on QKD between Micius, the world’s first quantum communications satellite, and an optical ground station located in Russia. The obtained synchronization precision lies in the range from 467 to 497 ps. The authors compare their algorithm for time synchronization with the previously used methods. The proposed approach can also be applied to terrestrial QKD systems.

DOI
10.1134/s0032946023040026

Related papers

A fast and efficient algorithm for time synchronization in satellite quantum key distribution

Alexander V. Miller

Abstract Time synchronization is one of the most crucial issues that must be addressed in developing quantum key distribution (QKD) systems. It not only lets the transmitter and the receiver to assign a sequence number to each event and then do correct basis reconciliation, but also allows to increase signal-to-noise ratio. Time synchronization in satellite communications is especially complicated due to such factors as high loss, signal fading and Doppler effect. In this work, a simple, efficient and robust algorithm for time synchronization is proposed. It was tested during experiments on QKD between Micius, the world’s first quantum communications satellite, and an optical ground station located in Russia. The obtained synchronization precision lies in the range from 467 to 497 ps. The authors compare their algorithm for time synchronization with the previously used methods. The proposed approach can also be applied to terrestrial QKD systems.

Journal of Physics Conference Series•Feb 1, 2024•4 citations

Robust aperiodic synchronous scheme for satellite-to-ground quantum key distribution

Chao-Ze Wang, Yang Li, Wenqi Cai +4 more

Time synchronization is essential for quantum key distribution (QKD) applications, not only in fiber links and terrestrial free-space links but also in satellite-to-ground links. To compensate for the time drift caused by the Doppler effect and adapt to the unstable optical link in satellite-to-ground QKD, previous demonstrations adopted a two-stage solution, combining a global navigation satellite system (GNSS) and light synchronization. In this paper, we propose a novel aperiodic synchronization scheme that can achieve high-precision time synchronization by encoding time information into pseudo-random laser pulse positions. This solution can simplify the use of GNSS hardware, thus reducing the complexity and cost of the system. Successful experiments have been conducted to demonstrate the feasibility and robustness of the presented scheme, resulting in a synchronization precision of 208-222 ps even when 90% of the light signals are lost. Further analysis of the Doppler effect between the satellite and the ground station is also given. The presented robust aperiodic synchronization can be widely applied to future satellite-based quantum information applications.

Applied Optics•May 11, 2021•15 citations

Synchronization using quantum photons for satellite-to-ground quantum key distribution

Chao-Ze Wang, Yang Li, Wenqi Cai +3 more

Time synchronization is crucial for quantum key distribution (QKD) systems. In order to compensate for the time drift caused by the Doppler effect and adapt to the unstable optical link in satellite-to-ground QKD, previous demonstrations generally adopted synchronization methods requiring additional hardware. In this paper, we present a novel synchronization method based on the detected quantum photons, thus simplifying additional hardware and reducing the complexity and cost. This method adopts target frequency scanning to realize fast frequency recovery, utilizes polynomial fitting to compensate for the Doppler effect, and takes use of the vacuum state in the decoy-state BB84 protocol to recover the time offset. This method can avoid the influence of synchronization light jitter, thus improving the synchronization precision and the secure keys as well. Successful satellite-to-ground QKD based on this new synchronization scheme has been conducted to demonstrate its feasibility and performance. The presented scheme provides an effective synchronization solution for quantum communication applications.

Optics Express•Aug 23, 2021•29 citations

Satellite QKD developments for secure communications

Agnes Ferenczi, Stefanie Häusler, Davide Orsucci +2 more

Quantum key distribution (QKD), the technology to generate distant secure keys for later usage in secure communication, has become a mature topic since the 1980s. While terrestrial QKD over fiber networks is suitable for short-distance urban networks, QKD via satellites promises to gap the distance requirement on a global scale that limits terrestrial QKD. Satellite QKD requires the exchange of quantum states between a satellite and multiple ground stations. The goal is then to facilitate shared secret keys between the ground stations, which can then be relayed to users near the ground stations. The satellite usually carries the quantum sources as its payload and sends them to the ground station via a downlink. The QKD protocol is heavily influenced by the choice of the quantum source, with typically one of two types: approximate single photon source (such as a weak laser) or an entangled source. Similarly, the ground station must be equipped to receive, measure and process the quantum signals sent by the satellite. Although there are also reverse schemes, where the satellite acts as the receiver and the ground station as the sender, these schemes are less explored due to higher noise in the uplink and less engineering experience. As with any system containing a high heterogeneity, many different implementation schemes lead to a variety of optimized use cases based on different criteria. Satellite QKD carries the further complication that it must be adapted to international standards. In this paper we present different satellite and ground station architectures that lean on the developments in the projects EAGLE-1, QUBE, QuNET, RoGloQuaN, addressing different protocols, sources, satellite sizes and telescope sizes. We also discuss the need for agility and configuration of components in a heterogeneous environment.

SPIE Quantum Technologies for Defence and Security•Oct 29, 2025•1 citation

Synchronization of quantum communications over an optical classical communications channel

Federico Berra, Costantino Agnesi, Andrea Stanco +5 more

Precise synchronization between a transmitter and receiver is crucial for quantum communications protocols such as quantum key distribution (QKD) to efficiently correlate the transmitted and received signals and increase the signal-to-noise ratio. In this work, we introduce a synchronization technique that exploits a co-propagating classical optical communications link and tests its performance in a free-space QKD system. Previously, existing techniques required additional laser beams or relied on the capability to retrieve the synchronization from the quantum signal itself; this approach, however, is not applicable in high channel loss scenarios. On the contrary, our method exploits classical and quantum signals locked to the same master clock, allowing the receiver to synchronize both the classical and quantum communications links by performing a clock-data-recovery routine on the classical signal. In this way, by exploiting the same classical communications already required for post-processing and key generation, no additional hardware is required, and the synchronization can be reconstructed from a high-power signal. Our approach is suitable for both satellite and fiber infrastructures, where a classical and quantum channel can be transmitted through the same link.

arXiv:2306.17603•Applied Optics•Oct 2, 2023•14 citations

Blockwise Maximization of the Secret Key with Signal Breaks in Satellite-Based Quantum Key Distribution

E. Ivchenko, A. Chernov, A. V. Khmelev +1 more

Abstract Satellite-based quantum communication is a promising technology for the secure worldwide sharing of data because quantum states are conveyed across free-space links with significantly less attenuation than optical fiber. However, the restricted communication time and dynamic parameter changes limit the secret key length, and to maximize the possible final key, an effective division of satellite-to-ground quantum communication at intervals must be chosen. Here, we present an original blockwise analysis for maximizing secret key length using the signal-to-noise ratio obtained after the frequency synchronization procedure. To validate our method, we perform an experimental simulation of the quantum key distribution protocol between the Micius satellite and the 600 mm aperture ground station with additional random channel breaks. As a result, the proposed blockwise method leads to an increase in the final key length compared to processing the full amount of noisy data.

Russian Microelectronics•Dec 1, 2023•1 citation
Time synchronization is one of the most crucial issues that must be addressed in developing quantum key distribution (QKD) systems. It not only lets the transmitter and the receiver to assign a sequence number to each event and then do correct basis reconciliation, but also allows to increase signal-to-noise ratio. Time synchronization in satellite communications is especially complicated due to such factors as high loss, signal fading, and Doppler effect. In this work, a simple, efficient, and robust algorithm for time synchronization is proposed. It was tested during experiments on QKD between Micius, the world’s first quantum communications satellite, and an optical ground station located in Russia. The obtained synchronization precision lies in the range from 467 to 497 ps. The authors compare their algorithm for time synchronization with the previously used methods. The proposed approach can also be applied to terrestrial QKD systems.
Abstract Time synchronization is one of the most crucial issues that must be addressed in developing quantum key distribution (QKD) systems. It not only lets the transmitter and the receiver to assign a sequence number to each event and then do correct basis reconciliation, but also allows to increase signal-to-noise ratio. Time synchronization in satellite communications is especially complicated due to such factors as high loss, signal fading and Doppler effect. In this work, a simple, efficient and robust algorithm for time synchronization is proposed. It was tested during experiments on QKD between Micius, the world’s first quantum communications satellite, and an optical ground station located in Russia. The obtained synchronization precision lies in the range from 467 to 497 ps. The authors compare their algorithm for time synchronization with the previously used methods. The proposed approach can also be applied to terrestrial QKD systems.
Time synchronization is essential for quantum key distribution (QKD) applications, not only in fiber links and terrestrial free-space links but also in satellite-to-ground links. To compensate for the time drift caused by the Doppler effect and adapt to the unstable optical link in satellite-to-ground QKD, previous demonstrations adopted a two-stage solution, combining a global navigation satellite system (GNSS) and light synchronization. In this paper, we propose a novel aperiodic synchronization scheme that can achieve high-precision time synchronization by encoding time information into pseudo-random laser pulse positions. This solution can simplify the use of GNSS hardware, thus reducing the complexity and cost of the system. Successful experiments have been conducted to demonstrate the feasibility and robustness of the presented scheme, resulting in a synchronization precision of 208-222 ps even when 90% of the light signals are lost. Further analysis of the Doppler effect between the satellite and the ground station is also given. The presented robust aperiodic synchronization can be widely applied to future satellite-based quantum information applications.
Time synchronization is crucial for quantum key distribution (QKD) systems. In order to compensate for the time drift caused by the Doppler effect and adapt to the unstable optical link in satellite-to-ground QKD, previous demonstrations generally adopted synchronization methods requiring additional hardware. In this paper, we present a novel synchronization method based on the detected quantum photons, thus simplifying additional hardware and reducing the complexity and cost. This method adopts target frequency scanning to realize fast frequency recovery, utilizes polynomial fitting to compensate for the Doppler effect, and takes use of the vacuum state in the decoy-state BB84 protocol to recover the time offset. This method can avoid the influence of synchronization light jitter, thus improving the synchronization precision and the secure keys as well. Successful satellite-to-ground QKD based on this new synchronization scheme has been conducted to demonstrate its feasibility and performance. The presented scheme provides an effective synchronization solution for quantum communication applications.
Quantum key distribution (QKD), the technology to generate distant secure keys for later usage in secure communication, has become a mature topic since the 1980s. While terrestrial QKD over fiber networks is suitable for short-distance urban networks, QKD via satellites promises to gap the distance requirement on a global scale that limits terrestrial QKD. Satellite QKD requires the exchange of quantum states between a satellite and multiple ground stations. The goal is then to facilitate shared secret keys between the ground stations, which can then be relayed to users near the ground stations. The satellite usually carries the quantum sources as its payload and sends them to the ground station via a downlink. The QKD protocol is heavily influenced by the choice of the quantum source, with typically one of two types: approximate single photon source (such as a weak laser) or an entangled source. Similarly, the ground station must be equipped to receive, measure and process the quantum signals sent by the satellite. Although there are also reverse schemes, where the satellite acts as the receiver and the ground station as the sender, these schemes are less explored due to higher noise in the uplink and less engineering experience. As with any system containing a high heterogeneity, many different implementation schemes lead to a variety of optimized use cases based on different criteria. Satellite QKD carries the further complication that it must be adapted to international standards. In this paper we present different satellite and ground station architectures that lean on the developments in the projects EAGLE-1, QUBE, QuNET, RoGloQuaN, addressing different protocols, sources, satellite sizes and telescope sizes. We also discuss the need for agility and configuration of components in a heterogeneous environment.
Precise synchronization between a transmitter and receiver is crucial for quantum communications protocols such as quantum key distribution (QKD) to efficiently correlate the transmitted and received signals and increase the signal-to-noise ratio. In this work, we introduce a synchronization technique that exploits a co-propagating classical optical communications link and tests its performance in a free-space QKD system. Previously, existing techniques required additional laser beams or relied on the capability to retrieve the synchronization from the quantum signal itself; this approach, however, is not applicable in high channel loss scenarios. On the contrary, our method exploits classical and quantum signals locked to the same master clock, allowing the receiver to synchronize both the classical and quantum communications links by performing a clock-data-recovery routine on the classical signal. In this way, by exploiting the same classical communications already required for post-processing and key generation, no additional hardware is required, and the synchronization can be reconstructed from a high-power signal. Our approach is suitable for both satellite and fiber infrastructures, where a classical and quantum channel can be transmitted through the same link.
Abstract Satellite-based quantum communication is a promising technology for the secure worldwide sharing of data because quantum states are conveyed across free-space links with significantly less attenuation than optical fiber. However, the restricted communication time and dynamic parameter changes limit the secret key length, and to maximize the possible final key, an effective division of satellite-to-ground quantum communication at intervals must be chosen. Here, we present an original blockwise analysis for maximizing secret key length using the signal-to-noise ratio obtained after the frequency synchronization procedure. To validate our method, we perform an experimental simulation of the quantum key distribution protocol between the Micius satellite and the 600 mm aperture ground station with additional random channel breaks. As a result, the proposed blockwise method leads to an increase in the final key length compared to processing the full amount of noisy data.