Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

Sensitivity of Rydberg microwave electrometry limited by laser frequency noise

Bowen Yang, Yuhan Yan, Xuejie Li, Haojie Zhao, Ling Xiao, Xiaolin Li, Jianliao Deng, Hua-Dong Cheng

Published Mar 11, 2024• 9 citations
Publisher

Abstract

Laser frequency or phase noise is a main factor that limits the sensitivity of Rydberg microwave (MW) electrometry. In this study, we proposed a theoretical approach to estimate the effect of laser frequency noise on the atomic coherence of Rydberg sensors based on an atomic superheterodyne receiver. The noisy lasers were characterized using a phase-diffusion model. In particular, explicit formulas were derived to evaluate the noise-limited sensitivity for a given laser linewidth. Furthermore, the effect of Doppler broadening on the sensitivity of the Rydberg sensor at different atomic temperatures was estimated. Our theoretical results provide guidance for the development of Rydberg MW sensors and the method discussed herein can be applied to many other quantum systems.

DOI
10.1103/physreva.109.032609

Related papers

Linear dynamic range of a Rydberg-atom microwave superheterodyne receiver

Feng-Chuan Wu, Qiang An, Zhanshan Sun +1 more

In recent years, electric field measurement techniques based on Rydberg atoms have shown unique advantages in high sensitivity and wideband applications and miniaturization. The Rydberg atom receiver senses the electromagnetic signal using the quantum coherence effect, which overcomes the inherent defects of traditional electronic receivers in terms of thermal noise, insertion loss of microwave devices, and the use of wavelength-dependent antennas, thus providing the Rydberg atomic receivers the potential to become the next generation of microwave receivers. For some particular application scenarios such as radar and communication, superheterodyne reception is a critical technical approach, and the linear dynamic range is an essential factor in evaluating the performance of the superheterodyne receivers. It is challenging to promote the Rydberg atomic receiver without figuring out the influence of system parameters on the linear dynamic range. This paper starts with the response mechanism of the Rydberg atomic superheterodyne receiver, and a theoretical model is established to simulate the atom-microwave responses. Then the harmonics' generation mechanism is discussed, and the atomic linear dynamic range under different probe light Rabi frequencies is studied further. Furthermore, a method to evaluate the antiblocking performance of the system is proposed. This work is expected to provide theoretical guidance for the design and performance optimization of the Rydberg atomic superheterodyne receiver.

Physical Review A•Apr 10, 2023•26 citations

Photon shot-noise-limited Rydberg-EIT electrometry

Gyeongmin Ju, Ye Jin Yu, Heewoo Kim +4 more

Rydberg-atom electrometry is a core technique in the development of highly sensitive quantum electric-field sensors. Its sensitivity based on atom-photon interaction is typically limited by photon shot-noise (PSN) and spectral broadenings. Here, we experimentally demonstrate a near PSN-limited Rydberg electrometry from a 85Rb atomic vapor cell. By engineering atomic coherence through control of residual magnetic fields and laser frequency noise, we achieve the Rydberg electromagnetically induced transparency (EIT) with the narrow linewidth of 1.6 MHz, yielding an enhanced spectral slope for high-sensitivity Rydberg-EIT electrometry. Under optimized superheterodyne detection conditions, we obtain an electric-field sensitivity of 12.5(8) nV cm^-1 Hz^-1/2 at 37 GHz, in close agreement with the calculated PSN limit. These results provide direct experimental evidence of the high-sensitive quantum electrometry and establish a practical route toward quantum-noise-limited Rydberg electrometry.

physics.atom-phCross-listedarXiv:2606.04354•Jun 4, 2026•0 citations

Sensitivity extension of atom-based amplitude-modulation microwave electrometry via high Rydberg states

Minghao Cai, Shuhang You, Shanshan Zhang +2 more

The Rydberg atom-based microwave electric field sensor has high sensitivity for weak RF-field detection. Selection of Rydberg states with larger electric dipole moment is beneficial to enhance the sensitivity, and we choose Rydberg states with its principal quantum number up to n ∼ 80. We study the probe laser transmission response to a microwave field for these chosen high Rydberg states at room temperature. It agrees well with theoretical simulation based on an optical Bloch equation with considered microwave-atom interaction and Doppler broadening effect. In our experiment, the microwave sensing sensitivity based on 85 Rb transition | 78 S 1 / 2 ⟩ → | 78 P 3 / 2 ⟩ arrives at 5.102(49) nV cm − 1 Hz − 1 / 2 at 1 kHz.

Applied Physics Letters•Apr 17, 2023•42 citations

Sensitivity enhancement in Rydberg atomic microwave superheterodyne measurements through laser-atom-microwave interaction mechanisms

Zhongzhou Tian, Guojin Zeng, Chao Yan +3 more

Measurement sensitivity is crucial for the practical application of Rydberg atomic microwave superheterodyne receiver systems in communication, radar, and navigation. Based on laser-atom-microwave interaction mechanisms, the influence of laser powers and local-oscillator (LO) microwave field intensity on measurement sensitivity is systematically studied in this paper. Measurement sensitivity is analyzed through electromagnetically induced transparency (EIT) spectral characteristics, specifically EIT amplitude and full-width-half-maximum (FWHM),larger amplitudes and narrower FWHM indicate improved signal-to-noise ratios. For a 60D-state Rydberg atomic system with fixed probe and coupling laser beam waists (800 µm and 875 µm), optimal parameters are determined: probe laser power of 60 µW(Rabi frequency: 2π×7.02 MHz), coupling laser power of 40 mW (Rabi frequency: 2π×0.66 MHz), and LO microwave Rabi frequency of 2π×8.34 MHz. Experimental results demonstrate a 4.6 dB sensitivity enhancement, advancing from −137.5dBm/Hz to −142.1 dBm/Hz at 3.21 GHz microwave field. This improvement is attributed to precise alignment of laser-atom and microwave-atom interactions, bridging the gap toward quantum sensitivity limits.

Applied Optics and Photonics China (AOPC)•Oct 28, 2025•0 citations

Rydberg-atom-based radio-frequency sensors: amplitude-regime sensing

Matthias Schmidt, Stephanie M. Bohaichuk, Vijin Venu +5 more

Rydberg atom-based radio frequency electromagnetic field sensors are drawing wide-spread interest because of their unique properties, such as small size, dielectric construction, and self-calibration. These photonic sensors use lasers to prepare atoms and read out the atomic response to a radio frequency electromagnetic field based on electromagnetically induced transparency, or related phenomena. Much of the theoretical work has focused on the Autler-Townes splitting induced by the radio frequency wave. The amplitude regime, where the change in transmission observed on resonance is measured to determine electric field strength, has received less attention. In this paper, we deliver analytic expressions that are useful for calculating the absorption coefficient in the amplitude regime. Our main goal is to describe the analytic expressions for the absorption coefficient and demonstrate their validity over a large range of the interesting parameter space. The effect of the thermal motion of the atoms is explicitly addressed. The analytic formulas for the absorption coefficient for different types of Doppler broadening are compared to estimate the sensitivity under conditions where it is limited by the laser shot noise. Residual Doppler shifts are shown to limit sensitivity. The expressions, approximations and descriptions presented in the paper are important for understanding the absorption of Rydberg atom-based sensors in the amplitude regime. This provides insight into the physics of multi-level interference phenomena.

arXiv:2307.00121•Optics Express•Jun 13, 2024•22 citations

Atom-based sensing of microwave electric fields using highly excited atoms: mechanisms affecting sensitivity

James P. Shaffer, Harald Kübler, James Keaveney +5 more

We have shown that Rydberg states can be used for high-sensitivity, absolute sensing of microwave (MW) electric fields. We achieved a sensitivity of 3 μVcm-1Hz-1/2 for two read-out strategies. Depending on the spectral resolution of the read-out, either the MW induced transmission line frequency splitting, the Autler-Townes regime, or a change in the on-resonant absorption, the amplitude regime, can be used to determine the MW electric field. Results using a Mach-Zehnder interferometer and frequency modulated spectroscopy both achieve similar photon shot noise limited sensitivity. In addition, we have also explored amplitude modulation and the displacement of a probe laser beam due to index of refraction changes in a prism shaped vapor cell. These latter methods were not able to achieve photon shot noise limited performance. Fundamental limits to the sensitivity of the Rydberg atom-based MW electric field sensing have been addressed, but it is important to clarify the differences between noise in different parts or subsystems of the sensor. Shot noise in the probe laser usually dominates the projection noise of the atoms participating in the measurement of the MW electric field because of the desire to operate at low effective Rydberg atom densities in order to avoid collisional dephasing and ionization.

Optical and Quantum Sensing and Precision Metrology II•Mar 1, 2019•9 citations
Laser frequency or phase noise is a main factor that limits the sensitivity of Rydberg microwave (MW) electrometry. In this study, we proposed a theoretical approach to estimate the effect of laser frequency noise on the atomic coherence of Rydberg sensors based on an atomic superheterodyne receiver. The noisy lasers were characterized using a phase-diffusion model. In particular, explicit formulas were derived to evaluate the noise-limited sensitivity for a given laser linewidth. Furthermore, the effect of Doppler broadening on the sensitivity of the Rydberg sensor at different atomic temperatures was estimated. Our theoretical results provide guidance for the development of Rydberg MW sensors and the method discussed herein can be applied to many other quantum systems.
In recent years, electric field measurement techniques based on Rydberg atoms have shown unique advantages in high sensitivity and wideband applications and miniaturization. The Rydberg atom receiver senses the electromagnetic signal using the quantum coherence effect, which overcomes the inherent defects of traditional electronic receivers in terms of thermal noise, insertion loss of microwave devices, and the use of wavelength-dependent antennas, thus providing the Rydberg atomic receivers the potential to become the next generation of microwave receivers. For some particular application scenarios such as radar and communication, superheterodyne reception is a critical technical approach, and the linear dynamic range is an essential factor in evaluating the performance of the superheterodyne receivers. It is challenging to promote the Rydberg atomic receiver without figuring out the influence of system parameters on the linear dynamic range. This paper starts with the response mechanism of the Rydberg atomic superheterodyne receiver, and a theoretical model is established to simulate the atom-microwave responses. Then the harmonics' generation mechanism is discussed, and the atomic linear dynamic range under different probe light Rabi frequencies is studied further. Furthermore, a method to evaluate the antiblocking performance of the system is proposed. This work is expected to provide theoretical guidance for the design and performance optimization of the Rydberg atomic superheterodyne receiver.
Rydberg-atom electrometry is a core technique in the development of highly sensitive quantum electric-field sensors. Its sensitivity based on atom-photon interaction is typically limited by photon shot-noise (PSN) and spectral broadenings. Here, we experimentally demonstrate a near PSN-limited Rydberg electrometry from a 85Rb atomic vapor cell. By engineering atomic coherence through control of residual magnetic fields and laser frequency noise, we achieve the Rydberg electromagnetically induced transparency (EIT) with the narrow linewidth of 1.6 MHz, yielding an enhanced spectral slope for high-sensitivity Rydberg-EIT electrometry. Under optimized superheterodyne detection conditions, we obtain an electric-field sensitivity of 12.5(8) nV cm^-1 Hz^-1/2 at 37 GHz, in close agreement with the calculated PSN limit. These results provide direct experimental evidence of the high-sensitive quantum electrometry and establish a practical route toward quantum-noise-limited Rydberg electrometry.
The Rydberg atom-based microwave electric field sensor has high sensitivity for weak RF-field detection. Selection of Rydberg states with larger electric dipole moment is beneficial to enhance the sensitivity, and we choose Rydberg states with its principal quantum number up to n ∼ 80. We study the probe laser transmission response to a microwave field for these chosen high Rydberg states at room temperature. It agrees well with theoretical simulation based on an optical Bloch equation with considered microwave-atom interaction and Doppler broadening effect. In our experiment, the microwave sensing sensitivity based on 85 Rb transition | 78 S 1 / 2 ⟩ → | 78 P 3 / 2 ⟩ arrives at 5.102(49) nV cm − 1 Hz − 1 / 2 at 1 kHz.
Measurement sensitivity is crucial for the practical application of Rydberg atomic microwave superheterodyne receiver systems in communication, radar, and navigation. Based on laser-atom-microwave interaction mechanisms, the influence of laser powers and local-oscillator (LO) microwave field intensity on measurement sensitivity is systematically studied in this paper. Measurement sensitivity is analyzed through electromagnetically induced transparency (EIT) spectral characteristics, specifically EIT amplitude and full-width-half-maximum (FWHM),larger amplitudes and narrower FWHM indicate improved signal-to-noise ratios. For a 60D-state Rydberg atomic system with fixed probe and coupling laser beam waists (800 µm and 875 µm), optimal parameters are determined: probe laser power of 60 µW(Rabi frequency: 2π×7.02 MHz), coupling laser power of 40 mW (Rabi frequency: 2π×0.66 MHz), and LO microwave Rabi frequency of 2π×8.34 MHz. Experimental results demonstrate a 4.6 dB sensitivity enhancement, advancing from −137.5dBm/Hz to −142.1 dBm/Hz at 3.21 GHz microwave field. This improvement is attributed to precise alignment of laser-atom and microwave-atom interactions, bridging the gap toward quantum sensitivity limits.
Rydberg atom-based radio frequency electromagnetic field sensors are drawing wide-spread interest because of their unique properties, such as small size, dielectric construction, and self-calibration. These photonic sensors use lasers to prepare atoms and read out the atomic response to a radio frequency electromagnetic field based on electromagnetically induced transparency, or related phenomena. Much of the theoretical work has focused on the Autler-Townes splitting induced by the radio frequency wave. The amplitude regime, where the change in transmission observed on resonance is measured to determine electric field strength, has received less attention. In this paper, we deliver analytic expressions that are useful for calculating the absorption coefficient in the amplitude regime. Our main goal is to describe the analytic expressions for the absorption coefficient and demonstrate their validity over a large range of the interesting parameter space. The effect of the thermal motion of the atoms is explicitly addressed. The analytic formulas for the absorption coefficient for different types of Doppler broadening are compared to estimate the sensitivity under conditions where it is limited by the laser shot noise. Residual Doppler shifts are shown to limit sensitivity. The expressions, approximations and descriptions presented in the paper are important for understanding the absorption of Rydberg atom-based sensors in the amplitude regime. This provides insight into the physics of multi-level interference phenomena.
We have shown that Rydberg states can be used for high-sensitivity, absolute sensing of microwave (MW) electric fields. We achieved a sensitivity of 3 μVcm-1Hz-1/2 for two read-out strategies. Depending on the spectral resolution of the read-out, either the MW induced transmission line frequency splitting, the Autler-Townes regime, or a change in the on-resonant absorption, the amplitude regime, can be used to determine the MW electric field. Results using a Mach-Zehnder interferometer and frequency modulated spectroscopy both achieve similar photon shot noise limited sensitivity. In addition, we have also explored amplitude modulation and the displacement of a probe laser beam due to index of refraction changes in a prism shaped vapor cell. These latter methods were not able to achieve photon shot noise limited performance. Fundamental limits to the sensitivity of the Rydberg atom-based MW electric field sensing have been addressed, but it is important to clarify the differences between noise in different parts or subsystems of the sensor. Shot noise in the probe laser usually dominates the projection noise of the atoms participating in the measurement of the MW electric field because of the desire to operate at low effective Rydberg atom densities in order to avoid collisional dephasing and ionization.