As an imperative division of the Internet of Things (IoT), Industrial IoT (IIoT) has also attracted full attention. IIoT networks are equipped with various authenticated key exchange techniques under the cumbersome Diffie–Hellman (DH) problems and certificate management overheads. However, DH-type problems are vulnerable to quantum cryptanalysis. In this article, a novel identity-based authenticated key exchange protocol is designed using the concept of lattice cryptography, which enables the different security features in the IIoT in open wireless communication. Due to the lattice hard assumptions, the proposed protocol can withstand a quantum attack. Rigorous formal security analysis has been made, which shows the ability of the proposed protocol to resist existing as well as quantum attacks. Performance results demonstrate that the proposed protocol exhibits better communication, energy consumption, cryptographic key storage, and computation costs than other similar state of the arts.
As an imperative division of the Internet of Things (IoT), Industrial IoT (IIoT) has also attracted full attention. IIoT networks are equipped with various authenticated key exchange techniques under the cumbersome Diffie–Hellman (DH) problems and certificate management overheads. However, DH-type problems are vulnerable to quantum cryptanalysis. In this article, a novel identity-based authenticated key exchange protocol is designed using the concept of lattice cryptography, which enables the different security features in the IIoT in open wireless communication. Due to the lattice hard assumptions, the proposed protocol can withstand a quantum attack. Rigorous formal security analysis has been made, which shows the ability of the proposed protocol to resist existing as well as quantum attacks. Performance results demonstrate that the proposed protocol exhibits better communication, energy consumption, cryptographic key storage, and computation costs than other similar state of the arts.
The proliferation of Industrial Internet of Things (IIoT) devices, coupled with their computational constraints, has necessitated robust authenticated key exchange mechanisms to secure communications. To address this issue, Gupta recently introduced a lattice-based lightweight authenticated key exchange protocol, PiLike, in the IEEE Systems Journal. Despite rigorous security proofs being provided, our cryptanalysis unveils a critical vulnerability in their scheme which may cause impersonation attacks. Specifically, in the private key extraction phase, an adversary can leverage secret information obtained during registration to impersonate legitimate users, successfully negotiating session keys while evading detection. In addition to the theoretical analysis, a corresponding concrete experiment was also conducted, showing that the adversary has a 100% success rate in breaking the required security claimed in PiLike. Our findings underscore the urgency to address PiLike's vulnerabilities, ensuring its reliability in safeguarding IIoT communications against conventional and quantum threats.
The rapid expansion of Internet of Things (IoT) ecosystems has introduced significant security challenges due to resource-constrained devices, heterogeneous network architectures, and largescale connectivity. Traditional authentication and key exchange mechanisms, primarily based on classical cryptographic algorithms such as RSA and ECC, are vulnerable to future quantum computing attacks. The emergence of quantum algorithms, particularly Shor’s algorithm, threatens the long-term confidentiality and integrity of IoT communications. This paper proposes a Quantum-Resistant Authentication and Key Exchange Protocol specifically designed for secure IoT architectures. The proposed framework integrates post-quantum cryptographic primitives, including lattice-based key exchange mechanisms and hash-based authentication schemes, optimized for low computational overhead suitable for constrained IoT devices. The protocol ensures mutual authentication, forward secrecy, and resistance against quantum adversaries while maintaining minimal communication latency. Security analysis demonstrates robustness against replay, man-in-the-middle, and key-compromise attacks. Performance evaluation shows that the proposed solution achieves a balance between quantum security strength and resource efficiency, making it suitable for next-generation IoT deployments in smart cities, healthcare systems, and industrial automation.
The Edge-enabled Industrial Internet of Things (Edge-IIoT) has emerged as a fundamental architecture for intelligent manufacturing by enabling low-latency data collection, processing, and communication among distributed industrial devices. However, the open and distributed nature of Edge-IIoT introduces significant challenges to secure data authentication and privacy preservation. Meanwhile, conventional public key infrastructure incurs considerable certificate management overhead and is not well suited for future industrial environments in the presence of quantum computing. To address these challenges, this paper proposes a lattice-based certificateless blind signature scheme for secure and privacy-preserving authentication in Edge-IIoT. The proposed scheme integrates the Dilithium signature algorithm with certificateless public key cryptography and blind signature techniques to simultaneously provide anonymous authentication, data integrity, conditional identity revocation, and post-quantum security while eliminating the certificate management overhead associated with traditional public key infrastructures. Furthermore, the proposed construction improves existing lattice-based certificateless blind signature schemes by addressing identified security weaknesses and strengthening resistance against forgery attacks, while effectively avoiding the key escrow problem inherent in identity-based cryptography. The correctness, blindness, and unforgeability of the proposed scheme are formally proved in the random oracle model based on the hardness of the Module Short Integer Solution (MSIS) problem. In addition, theoretical performance analysis demonstrates that the proposed scheme incurs acceptable computational, communication, and storage overhead while providing comprehensive security properties, including certificateless operation, identity anonymity, no key escrow, conditional revocation, and post-quantum security. Overall, the proposed scheme achieves an effective balance between security, privacy preservation, and efficiency, which exhibits favorable theoretical security-efficiency trade-offs for secure industrial data authentication in resource-constrained Edge-IIoT environments. Practical implementation is left for future investigation.
The Industrial Internet of Things (IIoT) enables smart manufacturing through advanced sensing, monitoring, and control capabilities. However, securing these resource-constrained IIoT devices poses critical challenges due to limited memory and energy resources, while the emergence of quantum computing threatens existing security mechanisms. This study addresses the urgent need for practical quantum-resistant security solutions for deployment in resource-limited industrial environments. It presents QLight-IIoT, a quantum-resistant authentication and key agreement (AKA) scheme established solely on hash-based hardness assumption, demonstrating that lightweight quantum-resistant authentication is achievable without relying on computationally intensive primitives like lattices or codes. The proposed scheme is deployed and tested over Raspberry Pi 4 to demonstrate its practicality in real-world IIoT environments. Experimental validation shows that the scheme ensures mutual authentication with session key establishment with an average key generation time of 0.3200 seconds. The security of the proposed QLight-IIoT scheme is systematically evaluated using the Real-or-Random (ROR) model, the Scyther tool, and the Automated Validation of Internet Security Protocols and Applications (AVISPA) framework. Performance evaluation reveals significant efficiency improvements, achieving 9.29–77.36% reduction in communication cost and 4.41–95.37% reduction in Computational overhead relative to existing schemes. The scheme requires minimal storage of 632 bits per IIoT device, resulting in up to 64.84% reduction in total system storage cost. Comparative security analysis further validates the scheme’s security against various attack vectors. This work provides a practical pathway for industrial organizations to prepare IIoT infrastructure for quantum-resistant security challenges while maintaining compatibility with current resource-constrained hardware.
The rapid expansion of the Internet of Things (IoT) has led to an unprecedented scale of data exchange across heterogeneous and resource-constrained devices. Ensuring confidentiality and secure key management in such environments is challenging. Traditional public-key infrastructures require heavy certificate-handling overhead. Identity-Based Encryption (IBE) offers a lightweight alternative by deriving public keys directly from device identities, making it attractive for IoT deployments. However, IoT devices are highly vulnerable to side-channel and key-extraction attacks, motivating the need for Forward-Secure IBE(FS-IBE), where the compromise of a current secret key does not threaten past communications. Existing FS-IBE constructions based on classical hardness assumptions are not secure in the era of post-quantum, while the lattice-based (LWE-based) forward-secure scheme suffer from large key and ciphertext sizes, limiting their suitability for constrained IoT systems. Here, we propose a new lattice-based fs-IBE scheme in the ring setting, relying on the RLWE assumption to achieve post-quantum security and significant efficiency gains. Our design uses trapdoor delegation with a minimal-cover mechanism over a binary tree. It results in compact public parameters and efficient per-epoch key updates. Compared to prior LWE-based constructions, our scheme reduces public key, secret key, and ciphertext sizes, and thus, making it better suited for practical IoT environments.
The rapid growth of the Internet of Things (IoT) has connected billions of smart devices across healthcare, transportation, industrial automation, and smart home environments. While IoT has enhanced automation and data-driven decision-making, its widespread deployment has also increased the risk of cyberattacks. Conventional public-key cryptographic algorithms such as RSA and Elliptic Curve Cryptography (ECC) are vulnerable to future quantum computing attacks, particularly those based on Shor's algorithm. This paper proposes a Quantum-Resistant Cryptographic Framework (QRCF) for secure IoT communication using lattice-based cryptography integrated with lightweight authentication and efficient key management. The framework is designed to meet the computational limitations of IoT devices while ensuring long-term confidentiality and integrity. Performance evaluation demonstrates improvements in security resilience, authentication efficiency, and communication reliability compared with traditional cryptographic approaches. The proposed framework offers a scalable and future-ready solution for protecting IoT ecosystems in the post-quantum era.