Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Frontiers in Optics

Strong-Field Homodyne Detection with Superconducting Nanowire Single-Photon Detectors

Maximilian Protte, Timon Schapeler, Jan Philipp Höpker, Tim J. Bartley

Published Jan 1, 2023• 0 citations
Publisher

Abstract

Using continuous-wave homodyne detection, we investigate the count rate linearity of two SNSPDs. With the demonstrated broad linear regime and a shot-noise clearance of 47 dB, they are versatile detectors for DV and CV experiments.
DOI
10.1364/fio.2023.jtu5a.70

Related papers

Performing Balanced Homodyne Detection with Superconducting Nanowire-Single Photon Detectors

Maximilian Protte, Timon Schapeler, Jan Sperling +1 more

We present a continuous-wave homodyne experiment with SNSPDs. Utilizing the low noise of SNSPDs, we achieve a SNC of 46 dB. From the joint-click statistics, we characterize a weak coherent state in terms of its continuous variables.

•Jan 1, 2024•0 citations

Low-noise balanced homodyne detection with superconducting nanowire single-photon detectors

Maximilian Protte, Timon Schapeler, Jan Sperling +1 more

Superconducting nanowire single-photon detectors (SNSPDs) have been widely used to study the discrete nature of quantum states of light in the form of photon-counting experiments. We show that SNSPDs can also be used to study continuous variables of optical quantum states by performing homodyne detection at a bandwidth of 400 kHz. By measuring the interference of a continuous-wave field of a local oscillator with the field of the vacuum state using two SNSPDs, we show that the variance of the difference in count rates is linearly proportional to the photon flux of the local oscillator over almost five orders of magnitude. The resulting shot-noise clearance of (46.0 ± 1.1) dB is the highest reported clearance for a balanced optical homodyne detector, demonstrating their potential for measuring highly squeezed states in the continuous-wave regime. In addition, we measured a CMRR = 22.4 dB. From the joint click counting statistics, we also measure the phase-dependent quadrature of a weak coherent state to demonstrate our device’s functionality as a homodyne detector.

arXiv:2307.16672•Optica Quantum•Nov 29, 2023•7 citations

High-efficiency, low noise UV superconducting nanowire single-photon detectors operating above 4 K

Emma E. Wollman, Varun Boehm Verma, Ryan M. Briggs +5 more

We have demonstrated ∼ 80% detection efficiency of 370 nm photons using superconducting nanowire single-photon detectors (SNSPDs) operating at 4.2 K, with system dark count rates below 1 count/s. Prospects for detecting shorter wavelengths are discussed.

Conference on Lasers and Electro-Optics•Jan 1, 2017•1 citation

High-speed and high-efficiency superconducting nanowire single photon detector array

Danna Rosenberg, Andrew J. Kerman, R. J. Molnar +1 more

Superconducting nanowire single photon detectors (SNSPDs) have separately demonstrated high efficiency, low noise, and extremely high speed when detecting single photons. However, achieving all of these simultaneously has been limited by detector subtleties and tradeoffs. Here, we report an SNSPD system with <80 ps timing resolution, kHz noise count rates, and 76% fiber-coupled system detection efficiency in the low-flux limit at 1550 nm. We present a model for determining the detection efficiency penalty due to the detection recovery time, and we validate our method using experimental data obtained at high count rates. We demonstrate improved performance tradeoffs, such as 68% system detection efficiency, including losses due to detector recovery time, when coupled to a Poisson source emitting 100 million photons per second. Our system can provide limited photon number resolution, continuous cryogen-free operation, and scalability to future imaging and GHz-count-rate applications.

Optics Express•Jan 14, 2013•191 citations

Superconducting nanowire single-photon detectors with 98% system detection efficiency at 1550 nm

Dileep V. Reddy, Robert R. Nerem, Sae Woo Nam +2 more

Superconducting nanowire single-photon detectors (SNSPDs) are an enabling technology for myriad quantum-optics experiments that require high-efficiency detection, large count rates, and precise timing resolution. The system detection efficiencies (SDEs) for fiber-coupled SNSPDs have fallen short of theoretical predictions of near unity by at least 7%, with the discrepancy being attributed to scattering, material absorption, and other SNSPD dynamics. We optimize the design and fabrication of an all-dielectric layered stack and fiber coupling package in order to achieve 98.0 ± 0.5 % SDE, measured for single-mode-fiber guided photons derived from a highly attenuated 1550 nm continuous-wave laser. This enforces a smaller bound on the scattering and absorption losses in such systems and opens the use of SNSPDs for scenarios that demand high-SDE for throughput and fidelity.

Optica•Oct 28, 2020•407 citations

Superconducting nanowire single-photon detectors for communication and fundamental physics applications

Jamie Luskin, Emma E. Wollman, Ekkehart Schmidt +9 more

Superconducting Nanowire Single Photon Detectors (SNSPDs) excel at a wide variety of performance criteria for single photon counting. They combine unprecedented high detection efficiency, high timing resolution, high count rates, low intrinsic dark count rates, and are sensitive to ultraviolet through mid-infrared single-photons. At JPL, we are working on several projects to push the performance limits of SNSPDs to achieve higher maximum count rates, larger active areas, higher timing resolution, and a wider spectral range. Our recent advances enable new applications for dark matter detection, imaging, and space-to-ground communication and provide insight into the fundamental physics of single-photon detection in superconducting nanowires.

Advanced Photon Counting Techniques•Apr 30, 2021•0 citations
Superconducting nanowire single-photon detectors (SNSPDs) have been widely used to study the discrete nature of quantum states of light in the form of photon-counting experiments. We show that SNSPDs can also be used to study continuous variables of optical quantum states by performing homodyne detection at a bandwidth of 400 kHz. By measuring the interference of a continuous-wave field of a local oscillator with the field of the vacuum state using two SNSPDs, we show that the variance of the difference in count rates is linearly proportional to the photon flux of the local oscillator over almost five orders of magnitude. The resulting shot-noise clearance of (46.0 ± 1.1) dB is the highest reported clearance for a balanced optical homodyne detector, demonstrating their potential for measuring highly squeezed states in the continuous-wave regime. In addition, we measured a CMRR = 22.4 dB. From the joint click counting statistics, we also measure the phase-dependent quadrature of a weak coherent state to demonstrate our device’s functionality as a homodyne detector.
Superconducting nanowire single photon detectors (SNSPDs) have separately demonstrated high efficiency, low noise, and extremely high speed when detecting single photons. However, achieving all of these simultaneously has been limited by detector subtleties and tradeoffs. Here, we report an SNSPD system with <80 ps timing resolution, kHz noise count rates, and 76% fiber-coupled system detection efficiency in the low-flux limit at 1550 nm. We present a model for determining the detection efficiency penalty due to the detection recovery time, and we validate our method using experimental data obtained at high count rates. We demonstrate improved performance tradeoffs, such as 68% system detection efficiency, including losses due to detector recovery time, when coupled to a Poisson source emitting 100 million photons per second. Our system can provide limited photon number resolution, continuous cryogen-free operation, and scalability to future imaging and GHz-count-rate applications.
Superconducting nanowire single-photon detectors (SNSPDs) are an enabling technology for myriad quantum-optics experiments that require high-efficiency detection, large count rates, and precise timing resolution. The system detection efficiencies (SDEs) for fiber-coupled SNSPDs have fallen short of theoretical predictions of near unity by at least 7%, with the discrepancy being attributed to scattering, material absorption, and other SNSPD dynamics. We optimize the design and fabrication of an all-dielectric layered stack and fiber coupling package in order to achieve 98.0 ± 0.5 % SDE, measured for single-mode-fiber guided photons derived from a highly attenuated 1550 nm continuous-wave laser. This enforces a smaller bound on the scattering and absorption losses in such systems and opens the use of SNSPDs for scenarios that demand high-SDE for throughput and fidelity.
Superconducting Nanowire Single Photon Detectors (SNSPDs) excel at a wide variety of performance criteria for single photon counting. They combine unprecedented high detection efficiency, high timing resolution, high count rates, low intrinsic dark count rates, and are sensitive to ultraviolet through mid-infrared single-photons. At JPL, we are working on several projects to push the performance limits of SNSPDs to achieve higher maximum count rates, larger active areas, higher timing resolution, and a wider spectral range. Our recent advances enable new applications for dark matter detection, imaging, and space-to-ground communication and provide insight into the fundamental physics of single-photon detection in superconducting nanowires.