Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

PHM Society Asia-Pacific Conference

Shipping inspection trial of quantum machine learning toward sustainable quantum factory

Takao Tomono, Satoko Natsubori

Published Sep 4, 2023• 4 citations
Publisher

Abstract

In recent years, the diversification of consumer values has led to an increase in the number of small-quantity, high-mix products. For many manufacturing companies, shipping inspections of such products are of great importance. As all products have the same value, good and defective products need to be efficiently identified. Now, a promising future application of quantum technology is considered to be quantum machine learning. We believe that the quantum classifier for SVMs using quantum kernels is one of the areas where quantum advantages can be demonstrated. At present, there are few examples of quantum classifiers applied to real problems in manufacturing processes. In this study, we aim to build a classifier that can demonstrate the quantum advantage and compare SVMs using classical and quantum kernels with conventional ResNet. Initially, a binarised image was generated after image pre-processing. After principal component analysis and dimensionality reduction were performed on the images, SVM with kernels was carried out. The kernel-based SVMs was then compared with the conventionally implemented Residual neural network (ResNet) using an evaluation index: F1-score. The results showed that the F1-score of SVMs using classical kernels was equivalent to that of Resnet. In addition, SVMs using quantum kernels showed higher F1-score than ResNet. In addition, the impact of the feature map and principal components of the quantum kernel was also investigated. It was found that when the feature map became more complex, conversely, circuit generation took more time. It was also found that the principal components are highly relevant to the image and cannot lead to simple results. In the future, we plan to accumulate more experimental data, look for scenes where quantum machine learning can be used and apply it to the manufacturing field.

DOI
10.36001/phmap.2023.v4i1.3733

Related papers

Performance of quantum kernel on initial learning process

Takao Tomono, Satoko Natsubori

Abstract For many manufacturing companies, the production line is very important. In recent years, the number of small-quantity, high-mix products have been increasing, and the identification of good and defective products must be carried out efficiently. At that time, machine learning is a very important issue on shipping inspection using small amounts of data. Quantum machine learning is one of most exciting prospective applications of quantum technologies. SVM using kernel estimation is one of most popular methods for classifiers. Our purpose is to search quantum advantage on classifier to enable us to classifier in inspection test for small size datasets. In this study, we made clear the difference between classical and quantum kernel learning in initial state and propose analysis of learning process by plotting ROC space. To meet the purpose, we investigated the effect of each feature map compared to classical one, using evaluation index. The simulation results show that the learning model construction process between quantum and classical kernel learning is different in initial state. Moreover, the result indicates that the learning model of quantum kernel is the method to decrease the false positive rate (FPR) from high FPR, keeping high true positive rates on several datasets. We demonstrate that learning process on quantum kernel is different from classical one in initial state and plotting to ROC space graph is effective when we analyse the learning model process.

EPJ Quantum Technology•Dec 1, 2022•16 citations

The discriminative ability on anomaly detection using quantum kernels for shipping inspection

Takao Tomono, Kazuya Tsujimura

We aim to use quantum machine learning to detect various anomalies in image inspection by using small size data. Assuming the possibility that the expressive power of the quantum kernel space is superior to that of the classical kernel space, we are studying a quantum machine learning model. Through trials of image inspection processes not only for factory products but also for products including agricultural products, the importance of trials on real data is recognized. In this study, training was carried out on SVMs embedded with various quantum kernels on a small number of agricultural product image data sets collected in the markets. The quantum kernels prepared in this study consisted of a smaller number of rotating gates and control gates. The F1 scores for each quantum kernel showed a significant effect of using CNOT gates. After confirming the results with a quantum simulator, the usefulness of the quantum kernels was confirmed on a quantum computer. Learning with SVMs embedded with specific quantum kernels showed significantly higher values of the AUC compared to classical kernels. The reason for the lack of learning in quantum kernels is considered to be due to kernel concentration or exponential concentration similar to the Baren plateau. The reason why the F1 score does not increase as the number of features increases is suggested to be due to exponential concentration, while at the same time it is possible that only certain features have discriminative ability. Furthermore, it is suggested that controlled Toffoli gate may be a promising quantum kernel component.

arXiv:2412.00783•EPJ Quantum Technology•Mar 21, 2025•7 citations

Applied Quantum Machine Learning on PCB Multi-Class Defect Detection

Ching-Wen Huang, Kuan-Cheng Chen, Ching-Jui Lai

This work establishes a systematic benchmark for hybrid quantum-classical learning applied to industrial visual inspection. A hybrid framework integrating ResNet-based feature extraction with Quantum Support Vector Machines (QSVMs) is proposed to evaluate quantum kernel performance in multi-class printed circuit board (PCB) defect classification. Feature embeddings extracted from a ResNet-18 backbone are reduced via principal component analysis and classified using both classical SVMs and multiple quantum kernel variants simulated on a 9 qubit system. Results show that well-designed quantum kernels achieve accuracy comparable to the classical RBF SVM baseline. These findings highlight the importance of circuit design and provide one of the first systematic benchmarks of QSVMs in a PCB defect classification setting, offering practical insights for future quantum-classical applications in manufacturing inspection.

International Conference on Quantum Communications, Networking, and Computing (QCNC)•Apr 6, 2026•1 citation

Quantum Machine Learning for Image Classification: A Hybrid Model of Residual Network with Quantum Support Vector Machine

Md. Farhan Shahriyar, Gazi Tanbhir, Abdullah Md Raihan Chy

Recently, there has been growing attention on combining quantum machine learning (QML) with classical deep learning approaches as computational techniques are key to improving the performance of image classification tasks.This study presents a hybrid approach that uses ResNet-50 (Residual Network) for feature extraction and Quantum Support Vector Machines (QSVM) for classification in the context of potato disease detection. Classical machine learning as well as deep learning models often struggle with high-dimensional and complex datasets necessitating advanced techniques like quantum computing to improve classification efficiency.In our research, we use ResNet-50 to extract deep feature representations from RGB images of potato diseases. These features are then subjected to dimensionality reduction using PCA (Principal Component Analysis). The resulting features are processed through QSVM models which apply various quantum feature maps—such as ZZ, Z and Pauli-X to transform classical data into quantum states. To assess the model’s performance we compared it with classical ML such as Support Vector Machine (SVM) and Random Forest (RF) using 5-fold stratified cross-validation for a comprehensive evaluation. The experimental results demonstrate that the Z-feature map-based QSVM outperforms classical models achieving an accuracy of 99.23% surpassing both SVM and RF models.This research highlights the advantages of integrating quantum computing into image classification and also provides disease detection solution into the potential of hybrid quantum-classical model.

arXiv:2510.23659•International Conference on Next-Generation Computing, IoT and Machine Learning (NCIM)•Jun 27, 2025•11 citations

Quantum Kernel for Image Classification of Real World Manufacturing Defects

Daniel Beaulieu, Dylan Miracle, Anh T. Pham +1 more

The quantum kernel method results clearly outperformed a classical SVM when analyzing low-resolution images with minimal feature selection on the quantum simulator, with inconsistent results when run on an actual quantum processor. We chose to use an existing quantum kernel method for classification. We applied dynamic decoupling error mitigation using the Mitiq package to the Quantum SVM kernel method, which, to our knowledge, has never been done for quantum kernel methods for image classification. We applied the quantum kernel method to classify real world image data from a manufacturing facility using a superconducting quantum computer. The manufacturing images were used to determine if a product was defective or was produced correctly through the manufacturing process. We also tested the Mitiq dynamical decoupling (DD) methodology to understand effectiveness in decreasing noise-related errors. We also found that the way classical data was encoded onto qubits in quantum states affected our results. All three quantum processing unit (QPU) runs of our angle encoded circuit returned different results, with one run having better than classical results, one run having equivalent to classical results, and a run with worse than classical results. The more complex instantaneous quantum polynomial (IQP) encoding approach showed better precision than classical SVM results when run on a QPU but had a worse recall and F1-score. We found that DD error mitigation did not improve the results of IQP encoded circuits runs and did not have an impact on angle encoded circuits runs on the QPU. In summary, we found that the angle encoded circuit performed the best of the quantum kernel encoding methods on real quantum hardware. In future research projects using quantum kernels to classify images, we recommend exploring other error mitigation techniques than Mitiq DD.

arXiv:2212.08693•Dec 16, 2022•3 citations

Quantum Kernels for Difficult Visual Discrimination

Takao Tomono, Kazuya Tsujimura, Takumi Godo

Quantum machine learning has attracted much attention in recent years as one of the applications of quantum computing. In particular, classification using quantum kernels has attracted attention as a means of efficient classification by mapping to a feature space. We aim to use quantum machine learning to identify good and defective products in images including factory products, building, and farm products. Though a fruit apple looks delicious, it has a vine crack inside when it is split in two, it loses its commercial value. It is very difficult to distinguish normal apples from apples with internal vine cracks which are not visible on the exterior, using photographs of the exterior. In this study, an attempt was made to classify internal defects with classical and quantum kernels using binarized images of apples, which are difficult to distinguish with the naked eye. As a result, the accuracy of the classical kernel was less than 0.75. However, with the quantum kernel, an accuracy of over 0.94 could be obtained. The performance of the quantum kernel varied significantly depending on its type. We found that quantum kernel circuits having Hadamard, and control Ry gate have affected the construction of the learning model. We have demonstrated that high accuracy can be achieved by using quantum kernels for the classification of images that are difficult to discriminate visually.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 17, 2023•1 citation
In recent years, the diversification of consumer values has led to an increase in the number of small-quantity, high-mix products. For many manufacturing companies, shipping inspections of such products are of great importance. As all products have the same value, good and defective products need to be efficiently identified. Now, a promising future application of quantum technology is considered to be quantum machine learning. We believe that the quantum classifier for SVMs using quantum kernels is one of the areas where quantum advantages can be demonstrated. At present, there are few examples of quantum classifiers applied to real problems in manufacturing processes. In this study, we aim to build a classifier that can demonstrate the quantum advantage and compare SVMs using classical and quantum kernels with conventional ResNet. Initially, a binarised image was generated after image pre-processing. After principal component analysis and dimensionality reduction were performed on the images, SVM with kernels was carried out. The kernel-based SVMs was then compared with the conventionally implemented Residual neural network (ResNet) using an evaluation index: F1-score. The results showed that the F1-score of SVMs using classical kernels was equivalent to that of Resnet. In addition, SVMs using quantum kernels showed higher F1-score than ResNet. In addition, the impact of the feature map and principal components of the quantum kernel was also investigated. It was found that when the feature map became more complex, conversely, circuit generation took more time. It was also found that the principal components are highly relevant to the image and cannot lead to simple results. In the future, we plan to accumulate more experimental data, look for scenes where quantum machine learning can be used and apply it to the manufacturing field.
Abstract For many manufacturing companies, the production line is very important. In recent years, the number of small-quantity, high-mix products have been increasing, and the identification of good and defective products must be carried out efficiently. At that time, machine learning is a very important issue on shipping inspection using small amounts of data. Quantum machine learning is one of most exciting prospective applications of quantum technologies. SVM using kernel estimation is one of most popular methods for classifiers. Our purpose is to search quantum advantage on classifier to enable us to classifier in inspection test for small size datasets. In this study, we made clear the difference between classical and quantum kernel learning in initial state and propose analysis of learning process by plotting ROC space. To meet the purpose, we investigated the effect of each feature map compared to classical one, using evaluation index. The simulation results show that the learning model construction process between quantum and classical kernel learning is different in initial state. Moreover, the result indicates that the learning model of quantum kernel is the method to decrease the false positive rate (FPR) from high FPR, keeping high true positive rates on several datasets. We demonstrate that learning process on quantum kernel is different from classical one in initial state and plotting to ROC space graph is effective when we analyse the learning model process.
We aim to use quantum machine learning to detect various anomalies in image inspection by using small size data. Assuming the possibility that the expressive power of the quantum kernel space is superior to that of the classical kernel space, we are studying a quantum machine learning model. Through trials of image inspection processes not only for factory products but also for products including agricultural products, the importance of trials on real data is recognized. In this study, training was carried out on SVMs embedded with various quantum kernels on a small number of agricultural product image data sets collected in the markets. The quantum kernels prepared in this study consisted of a smaller number of rotating gates and control gates. The F1 scores for each quantum kernel showed a significant effect of using CNOT gates. After confirming the results with a quantum simulator, the usefulness of the quantum kernels was confirmed on a quantum computer. Learning with SVMs embedded with specific quantum kernels showed significantly higher values of the AUC compared to classical kernels. The reason for the lack of learning in quantum kernels is considered to be due to kernel concentration or exponential concentration similar to the Baren plateau. The reason why the F1 score does not increase as the number of features increases is suggested to be due to exponential concentration, while at the same time it is possible that only certain features have discriminative ability. Furthermore, it is suggested that controlled Toffoli gate may be a promising quantum kernel component.
This work establishes a systematic benchmark for hybrid quantum-classical learning applied to industrial visual inspection. A hybrid framework integrating ResNet-based feature extraction with Quantum Support Vector Machines (QSVMs) is proposed to evaluate quantum kernel performance in multi-class printed circuit board (PCB) defect classification. Feature embeddings extracted from a ResNet-18 backbone are reduced via principal component analysis and classified using both classical SVMs and multiple quantum kernel variants simulated on a 9 qubit system. Results show that well-designed quantum kernels achieve accuracy comparable to the classical RBF SVM baseline. These findings highlight the importance of circuit design and provide one of the first systematic benchmarks of QSVMs in a PCB defect classification setting, offering practical insights for future quantum-classical applications in manufacturing inspection.
Recently, there has been growing attention on combining quantum machine learning (QML) with classical deep learning approaches as computational techniques are key to improving the performance of image classification tasks.This study presents a hybrid approach that uses ResNet-50 (Residual Network) for feature extraction and Quantum Support Vector Machines (QSVM) for classification in the context of potato disease detection. Classical machine learning as well as deep learning models often struggle with high-dimensional and complex datasets necessitating advanced techniques like quantum computing to improve classification efficiency.In our research, we use ResNet-50 to extract deep feature representations from RGB images of potato diseases. These features are then subjected to dimensionality reduction using PCA (Principal Component Analysis). The resulting features are processed through QSVM models which apply various quantum feature maps—such as ZZ, Z and Pauli-X to transform classical data into quantum states. To assess the model’s performance we compared it with classical ML such as Support Vector Machine (SVM) and Random Forest (RF) using 5-fold stratified cross-validation for a comprehensive evaluation. The experimental results demonstrate that the Z-feature map-based QSVM outperforms classical models achieving an accuracy of 99.23% surpassing both SVM and RF models.This research highlights the advantages of integrating quantum computing into image classification and also provides disease detection solution into the potential of hybrid quantum-classical model.
The quantum kernel method results clearly outperformed a classical SVM when analyzing low-resolution images with minimal feature selection on the quantum simulator, with inconsistent results when run on an actual quantum processor. We chose to use an existing quantum kernel method for classification. We applied dynamic decoupling error mitigation using the Mitiq package to the Quantum SVM kernel method, which, to our knowledge, has never been done for quantum kernel methods for image classification. We applied the quantum kernel method to classify real world image data from a manufacturing facility using a superconducting quantum computer. The manufacturing images were used to determine if a product was defective or was produced correctly through the manufacturing process. We also tested the Mitiq dynamical decoupling (DD) methodology to understand effectiveness in decreasing noise-related errors. We also found that the way classical data was encoded onto qubits in quantum states affected our results. All three quantum processing unit (QPU) runs of our angle encoded circuit returned different results, with one run having better than classical results, one run having equivalent to classical results, and a run with worse than classical results. The more complex instantaneous quantum polynomial (IQP) encoding approach showed better precision than classical SVM results when run on a QPU but had a worse recall and F1-score. We found that DD error mitigation did not improve the results of IQP encoded circuits runs and did not have an impact on angle encoded circuits runs on the QPU. In summary, we found that the angle encoded circuit performed the best of the quantum kernel encoding methods on real quantum hardware. In future research projects using quantum kernels to classify images, we recommend exploring other error mitigation techniques than Mitiq DD.
Quantum machine learning has attracted much attention in recent years as one of the applications of quantum computing. In particular, classification using quantum kernels has attracted attention as a means of efficient classification by mapping to a feature space. We aim to use quantum machine learning to identify good and defective products in images including factory products, building, and farm products. Though a fruit apple looks delicious, it has a vine crack inside when it is split in two, it loses its commercial value. It is very difficult to distinguish normal apples from apples with internal vine cracks which are not visible on the exterior, using photographs of the exterior. In this study, an attempt was made to classify internal defects with classical and quantum kernels using binarized images of apples, which are difficult to distinguish with the naked eye. As a result, the accuracy of the classical kernel was less than 0.75. However, with the quantum kernel, an accuracy of over 0.94 could be obtained. The performance of the quantum kernel varied significantly depending on its type. We found that quantum kernel circuits having Hadamard, and control Ry gate have affected the construction of the learning model. We have demonstrated that high accuracy can be achieved by using quantum kernels for the classification of images that are difficult to discriminate visually.