Monolithic fabrication of ion traps integrated with a micro optical cavity is the building block for large scale ion trap quantum network. The authors designed such traps and successfully trapped single ions. Cavity mirrors with the desired shape and quality are fabricated on optical fibre tips robustly.
Scalable quantum information processing requires efficient coupling between stationary qubits (trapped atoms, ions, NV centres, etc.) via “flying” single-photon qubits. Here we investigate the optimisation and integration of fibre-tip microcavities into radiofrequency ion traps to achieve (i) high-fidelity transfer of ion qubits onto single photons, (ii) low-loss coupling of cavity photons into single-mode optical fibre, and (iii) achieving conditions (i) and (ii) without disturbing the ion trap. Our cavities are fabricated by laser micro-machining the ends of optical fibres and subsequent coating with a thin dielectric mirror, giving rise to cavity mirrors with a Gaussian profile. These cavities allow for small mode volume and thus large ion-photon coupling fulfilling requirement (i), while simultaneously providing intrinsic coupling to optical fibres, requirement (ii), as long as mode matching between the cavity mode and the fibre mode can be achieved at the cavity mirror. Using a semi-analytical numerical method, we show that Gaussian-shaped mirrors can in fact be used to enhance ion-photon coupling beyond what is possible with more common spherical cavity mirrors. Ion traps are notoriously sensitive to the presence of dielectric materials such as cavity mirrors near the trap centre, preventing requirement (iii) from being achieved. We performed an extensive numerical study of five different common ion traps to find the optimum configurations for integrating fibre-tip cavities with minimised effects on the trapping potentials. We discuss these results and present simple and effective design rules for realising optimum ion-cavity based quantum networks.
Combining optical cavities with trapped atomic ions is a powerful tool to investigate the interaction of light with matter on the most fundamental scale: a single atom with a single particle of light. Recent advances have not only demonstrated the emission of single photons, ion-photon entanglement and ion-ion entanglement but paved the way to use these systems in modern quantum technologies. Ion-cavity systems are now one of the most promising technologies for realising a scalable quantum computer and quantum networks. While the integration of optical cavities and ion traps is challenging, new techniques and technologies made it possible to demonstrate important building blocks for such systems.
Integrating an optical cavity into a radio-frequency ion trap yields an ideal building block for quantum information networks or quantum computers. Unfortunately, it also jeopardizes the trap's stability. The authors compare the advantages and disadvantages of known ion-trap geometries and cavity configurations, and identify general features of the geometries best suited to developing a scalable network. This comprehensive study is an essential step in the development of tomorrow's secure quantum networks.
Abstract Trapped ions in micro-cavities constitute a key platform for advancing quantum information processing and quantum networking. By providing an efficient light–matter interface within a compact architecture, they serve as highly efficient quantum nodes with strong potential for a scalable quantum network. However, in such systems, ion trapping stability is often compromised by surface charging effects, and nearby dielectric materials are known to cause a dramatic increase in the ion heating rate by several orders of magnitude. These challenges significantly hinder the practical implementation of ion trap systems integrated with micro-cavities. To overcome these limitations, we present the design and fabrication of metal-shielded fiber-cavity mirrors, enabling the stable realization of ion trap systems integrated with fiber cavities. Using this method, we constructed a needle ion trap integrated with a fiber Fabry–Pérot cavity and successfully achieved stable trapping of a single ion within the cavity. The measured ion heating rate was reduced by more than an order of magnitude compared with unshielded configurations. This work establishes a key technique toward fully integrated ion–photon interfaces for scalable quantum networks.
Precise control over internal states of atomic ions in ion traps has been possible for many years enabling high precision spectroscopy of atomic transitions. Trapped ions are suitable candidates for quantum information processing due to their long storage times, low decoherence rates and high readout efficiency. Recent advances in micro-machining fibre optic mirrors and integrated fibre optic-ion trap systems for cavity QED allows one to realise strong coupling between an ion and a cavity mode by reducing the mode volume. For strong ion-cavity coupling, deterministic transfer of quantum states between ions and photons is possible. We have designed and constructed a miniaturised linear Paul trap with an integrated optical cavity, intended for coupling multiple ions to the cavity mode. The RF-electrode separation is 50μm, while the endcap separation is 350μm. The endcap electrodes are narrow tubes of inner diameter 300μm allowing optical fibers through the tubes to form the cavity. The trap depth we calculate to be 650meV for a 10V applied potential at 20MHz. The 4P1⁄2→ 3D3⁄2 transition of the atomic ion 40Ca+ with Γ = 24π × 22MHz can be coupled to an optical fibre Fabry-Perot cavity with length of 380µm, finesse of 33,000 and cavity linewidth k = 2π ×11MHz.The ion-cavity coherent coupling g = 2π × 19:5MHz of this system will put it in single-ion strong coupling regime with cooperativity, C=1.5.