Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

New Journal of Physics

Capacitive coupling of coherent quantum phase slip qubits to a resonator

T. Hönigl-Decrinis, Ilya Antonov, Rais S. Shaikhaidarov, Kyung Ho Kim, Vladimir N Antonov, O. V. Astafiev

Published Oct 17, 2023• 3 citations
Publisher

Abstract

Abstract We demonstrate capacitive coupling of coherent quantum phase slip (CQPS) flux qubits to a resonator patterned on a highly disordered TiN film. We are able to detect and characterise CQPS flux qubits with linewidths down to Δ ω = 12 ± 1 MHz on several resonator modes, and show that, unlike inductive coupling, here the coupling strength does not depend on the qubit’s energy. Since the qubit is galvanically decoupled from the resonator, our approach provides flexibility in material, design and fabrication choices for CQPS-based devices. Our results are two-fold: we report CQPS in TiN and demonstrate, to our knowledge for the first time, capacitive coupling of a CQPS flux qubit.

DOI
10.1088/1367-2630/ad042e

Related papers

Coherent Quantum Phase-Slips in Superconducting Nanowires in DC Transport

JC Fenton, Jonathan Burnett

The phenomenon of coherent quantum phase-slips (CQPS) in superconducting nanowires was some time ago proposed to be the exact dual of the Josephson effect, a proposal accompanied by predictions of a new quantum current standard dual to the Josephson voltage standard. Unambiguous experimental observation of CQPS in nanowire structures has only recently been achieved through microwave spectroscopy which showed an avoided crossing between flux states for a superconducting ring interrupted by a superconducting nanowire. This observation raises expectations that the CQPS quantum current standard and a slew of CQPS devices dual to devices containing Josephson junction might be realised, including a tunable capacitance, a sensitive charge detector and small-signal detector. To date, experimental evidence for CQPS in a dc transport geometry has not been considered conclusive, and the impact of decoherence in CQPS devices still remains to be evaluated. We present experimental work which has enabled us to crystallise pertinent issues which have prevented the realisation of CQPS in dc transport experiments to date.

•Aug 7, 2014•0 citations

Ultrastrong Capacitive Coupling of Flux Qubits

María Hita-Pérez, Gabriel Jaumà, M. Pino +1 more

A flux qubit can interact strongly when it is capacitively coupled to other circuit elements. This interaction can be separated into two parts, one acting on the qubit subspaces and one in which excited states mediate the interaction. The first term dominates the interaction between the flux qubit and an $LC$ resonator, leading to ultrastrong couplings of the form ${\ensuremath{\sigma}}^{y}(a+{a}^{\ifmmode\dagger\else\textdagger\fi{}})$, which complement the inductive ${\ensuremath{\sigma}}^{x}i({a}^{\ifmmode\dagger\else\textdagger\fi{}}\ensuremath{-}a)$ coupling. However, when coupling two flux qubits capacitively, all terms need to be taken into account, leading to complex nonstoquastic ultrastrong interaction of types ${\ensuremath{\sigma}}_{1}^{y}{\ensuremath{\sigma}}_{2}^{y}$, ${\ensuremath{\sigma}}_{1}^{z}{\ensuremath{\sigma}}_{2}^{z}$, and ${\ensuremath{\sigma}}_{1}^{x}{\ensuremath{\sigma}}_{2}^{x}$. Our theory explains all these interactions, describing them in terms of general circuit properties---coupling capacitances, qubit gaps, inductive, Josephson and capacitive energies---that apply to a wide variety of circuits and flux qubit designs.

arXiv:2108.02549•Physical Review Applied•Jan 24, 2022•8 citations

Dephasing in Fluxonium Qubits from Coherent Quantum Phase Slips

Mallika T. Randeria, Thomas Hazard, Agustín Di Paolo +12 more

Phase slips occur across all Josephson junctions (JJs) at a rate that increases with the impedance of the junction. In superconducting qubits composed of JJ-array superinductors—such as fluxonium—phase slips in the array can lead to decoherence. In particular, phase-slip processes at the individual array junctions can coherently interfere, each with an Aharonov-Casher phase that depends on the offset charges of the array islands. These coherent quantum phase slips (CQPS) perturbatively modify the qubit frequency, and therefore charge noise on the array islands will lead to dephasing. By varying the impedance of the array junctions, we design a set of fluxonium qubits in which the expected phase-slip rate within the JJ array changes by several orders of magnitude. We characterize the coherence times of these qubits and demonstrate that the scaling of CQPS-induced dephasing rates agrees with our theoretical model. Furthermore, we perform noise spectroscopy of two qubits in regimes dominated by either CQPS or flux noise. We find that the noise power spectrum associated with CQPS dephasing appears to be featureless at low frequencies and not 1 / f . Numerical simulations indicate that this behavior is consistent with charge noise generated by charge-parity fluctuations within the array. Our findings broadly inform JJ-array-design trade-offs, relevant for the numerous superconducting-qubit designs employing JJ-array superinductors. Published by the American Physical Society 2024

arXiv:2404.02989•PRX Quantum•Aug 27, 2024•12 citations

Superconducting flux qubit capacitively coupled to an LC resonator

Tsuyoshi Yamamoto, K. Inomata, Kazuki Koshino +3 more

We study the system where a superconducting flux qubit is capacitively coupled to an LC resonator. In three devices with different coupling capacitance, the magnitude of the dispersive shift is enhanced by the third level of the qubit and quantitatively agrees with the theory. We show by numerical calculation that the capacitive coupling plays an essential role for the enhancement in the dispersive shift. We investigate the coherence properties in two of these devices, which are in the strong-dispersive regime, and show that the qubit energy relaxation is currently not limited by the coupling. We also observe the discrete ac-Stark effect, a hallmark of the strong-dispersive regime, in accordance with the theory.

New Journal of Physics•Jan 10, 2014•29 citations

Variable Qubit-Qubit Coupling Via a Tunable LC Resonator

C.J. Ballard

This dissertation examines the design, fabrication, and characterization of a superconducting lumped-element tunable LC resonator that is used to vary the coupling between two superconducting qubits. Some level of qubit-qubit coupling is needed to perform gating operations. However, with fixed coupling, single qubit operations become considerably more difficult due to dispersive shifts in their energy levels transitions that depend on the state of the other qubit. Ideally, one wants a system in which the qubit-qubit coupling can be turned off to allow for single qubit operations, and then turned back on to allow for multi-qubit gate operations. I present results on a device that has two fixed-frequency transmon qubits capacitively coupled to a tunable thin-film LC resonator. The resonator can be tuned in situ over a range of 4.14 GHz to 4.94 GHz by applying an external magnetic flux to two single-Josephson junction loops, which are incorporated into the resonator’s inductance. The qubits have 0-to-1 transition frequencies of 5.10 GHz and 4.74 GHz. To isolate the system and provide a means for reading out the state of the qubit readout, the device was mounted in a 3D Al microwave cavity with a TE101 mode resonance frequency of about 6.1 GHz. The flux-dependent transition frequencies of the system were measured and fit to results from a coupled Hamiltonian model. With the LC resonator tuned to its minimum resonance frequency, I observed a qubit-qubit dispersive shift of 2χ_qq≈ 0.1 MHz, which was less than the linewidth of the qubit transitions. This dispersive shift was sufficiently small to consider the coupling “off”, allowing single qubit operations. The qubit-qubit dispersive shift varied with the applied flux up to a maximum dispersive shift of 2χ_qq≈ 6 MHz. As a proof-of-principle, I present preliminary results on performing a CNOT gate operation on the qubits when the coupling was “on” with 2χ_qq≈ 4 MHz. This dissertation also includes observations of the temperature dependence of the relaxation time T1 of three Al/AlOx/Al transmons. We found that, in some cases, T1 increased by almost a factor of two as the temperature increased from 30 mK to 100 mK. We found that this anomalous behavior was consistent with loss due to non-equilibrium quasiparticles in a transmon where one electrode in the tunnel junction had a smaller volume and slightly smaller superconducting energy gap than the other electrode. At sufficiently low temperatures, non-equilibrium quasiparticles accumulate in the electrode with a smaller gap, leading to an increased density of quasiparticles at the junction and a corresponding decrease in the relaxation time. I present a model of this effect, use the model to extract the density of non-equilibrium quasiparticles in the device, and find the values of the two superconducting energy gaps.

•Jan 1, 2018•0 citations

Probing the quantum coherence of a nanomechanical resonator using a superconducting qubit: II. Implementation

M. P. Blencowe, Andrew D. Armour

We describe a possible implementation of the nanomechanical quantum superposition generation and detection scheme described in the preceding, companion paper (Armour A D and Blencowe M P 2008 New. J. Phys. 10 095004). The implementation is based on the circuit quantum electrodynamics (QED) set-up, with the addition of a mechanical degree of freedom formed out of a suspended, doubly-clamped segment of the superconducting loop of a dc SQUID located directly opposite the centre conductor of a coplanar waveguide (CPW). The relative merits of two SQUID based qubit realizations are addressed, in particular a capacitively coupled charge qubit and inductively coupled flux qubit. It is found that both realizations are equally promising, with comparable qubit–mechanical resonator mode as well as qubit–microwave resonator mode coupling strengths.

arXiv:0804.2179•New Journal of Physics•Sep 30, 2008•15 citations
Abstract We demonstrate capacitive coupling of coherent quantum phase slip (CQPS) flux qubits to a resonator patterned on a highly disordered TiN film. We are able to detect and characterise CQPS flux qubits with linewidths down to Δ ω = 12 ± 1 MHz on several resonator modes, and show that, unlike inductive coupling, here the coupling strength does not depend on the qubit’s energy. Since the qubit is galvanically decoupled from the resonator, our approach provides flexibility in material, design and fabrication choices for CQPS-based devices. Our results are two-fold: we report CQPS in TiN and demonstrate, to our knowledge for the first time, capacitive coupling of a CQPS flux qubit.
The phenomenon of coherent quantum phase-slips (CQPS) in superconducting nanowires was some time ago proposed to be the exact dual of the Josephson effect, a proposal accompanied by predictions of a new quantum current standard dual to the Josephson voltage standard. Unambiguous experimental observation of CQPS in nanowire structures has only recently been achieved through microwave spectroscopy which showed an avoided crossing between flux states for a superconducting ring interrupted by a superconducting nanowire. This observation raises expectations that the CQPS quantum current standard and a slew of CQPS devices dual to devices containing Josephson junction might be realised, including a tunable capacitance, a sensitive charge detector and small-signal detector. To date, experimental evidence for CQPS in a dc transport geometry has not been considered conclusive, and the impact of decoherence in CQPS devices still remains to be evaluated. We present experimental work which has enabled us to crystallise pertinent issues which have prevented the realisation of CQPS in dc transport experiments to date.
A flux qubit can interact strongly when it is capacitively coupled to other circuit elements. This interaction can be separated into two parts, one acting on the qubit subspaces and one in which excited states mediate the interaction. The first term dominates the interaction between the flux qubit and an LCLCLC resonator, leading to ultrastrong couplings of the form ${\ensuremath{\sigma}}^{y}(a+{a}^{\ifmmode\dagger\else\textdagger\fi{}})$, which complement the inductive ${\ensuremath{\sigma}}^{x}i({a}^{\ifmmode\dagger\else\textdagger\fi{}}\ensuremath{-}a)$ coupling. However, when coupling two flux qubits capacitively, all terms need to be taken into account, leading to complex nonstoquastic ultrastrong interaction of types ${\ensuremath{\sigma}}_{1}^{y}{\ensuremath{\sigma}}_{2}^{y}$, ${\ensuremath{\sigma}}_{1}^{z}{\ensuremath{\sigma}}_{2}^{z}$, and ${\ensuremath{\sigma}}_{1}^{x}{\ensuremath{\sigma}}_{2}^{x}$. Our theory explains all these interactions, describing them in terms of general circuit properties---coupling capacitances, qubit gaps, inductive, Josephson and capacitive energies---that apply to a wide variety of circuits and flux qubit designs.
Phase slips occur across all Josephson junctions (JJs) at a rate that increases with the impedance of the junction. In superconducting qubits composed of JJ-array superinductors—such as fluxonium—phase slips in the array can lead to decoherence. In particular, phase-slip processes at the individual array junctions can coherently interfere, each with an Aharonov-Casher phase that depends on the offset charges of the array islands. These coherent quantum phase slips (CQPS) perturbatively modify the qubit frequency, and therefore charge noise on the array islands will lead to dephasing. By varying the impedance of the array junctions, we design a set of fluxonium qubits in which the expected phase-slip rate within the JJ array changes by several orders of magnitude. We characterize the coherence times of these qubits and demonstrate that the scaling of CQPS-induced dephasing rates agrees with our theoretical model. Furthermore, we perform noise spectroscopy of two qubits in regimes dominated by either CQPS or flux noise. We find that the noise power spectrum associated with CQPS dephasing appears to be featureless at low frequencies and not 1 / f . Numerical simulations indicate that this behavior is consistent with charge noise generated by charge-parity fluctuations within the array. Our findings broadly inform JJ-array-design trade-offs, relevant for the numerous superconducting-qubit designs employing JJ-array superinductors. Published by the American Physical Society 2024
We study the system where a superconducting flux qubit is capacitively coupled to an LC resonator. In three devices with different coupling capacitance, the magnitude of the dispersive shift is enhanced by the third level of the qubit and quantitatively agrees with the theory. We show by numerical calculation that the capacitive coupling plays an essential role for the enhancement in the dispersive shift. We investigate the coherence properties in two of these devices, which are in the strong-dispersive regime, and show that the qubit energy relaxation is currently not limited by the coupling. We also observe the discrete ac-Stark effect, a hallmark of the strong-dispersive regime, in accordance with the theory.
This dissertation examines the design, fabrication, and characterization of a superconducting lumped-element tunable LC resonator that is used to vary the coupling between two superconducting qubits. Some level of qubit-qubit coupling is needed to perform gating operations. However, with fixed coupling, single qubit operations become considerably more difficult due to dispersive shifts in their energy levels transitions that depend on the state of the other qubit. Ideally, one wants a system in which the qubit-qubit coupling can be turned off to allow for single qubit operations, and then turned back on to allow for multi-qubit gate operations. I present results on a device that has two fixed-frequency transmon qubits capacitively coupled to a tunable thin-film LC resonator. The resonator can be tuned in situ over a range of 4.14 GHz to 4.94 GHz by applying an external magnetic flux to two single-Josephson junction loops, which are incorporated into the resonator’s inductance. The qubits have 0-to-1 transition frequencies of 5.10 GHz and 4.74 GHz. To isolate the system and provide a means for reading out the state of the qubit readout, the device was mounted in a 3D Al microwave cavity with a TE101 mode resonance frequency of about 6.1 GHz. The flux-dependent transition frequencies of the system were measured and fit to results from a coupled Hamiltonian model. With the LC resonator tuned to its minimum resonance frequency, I observed a qubit-qubit dispersive shift of 2χ_qq≈ 0.1 MHz, which was less than the linewidth of the qubit transitions. This dispersive shift was sufficiently small to consider the coupling “off”, allowing single qubit operations. The qubit-qubit dispersive shift varied with the applied flux up to a maximum dispersive shift of 2χ_qq≈ 6 MHz. As a proof-of-principle, I present preliminary results on performing a CNOT gate operation on the qubits when the coupling was “on” with 2χ_qq≈ 4 MHz. This dissertation also includes observations of the temperature dependence of the relaxation time T1 of three Al/AlOx/Al transmons. We found that, in some cases, T1 increased by almost a factor of two as the temperature increased from 30 mK to 100 mK. We found that this anomalous behavior was consistent with loss due to non-equilibrium quasiparticles in a transmon where one electrode in the tunnel junction had a smaller volume and slightly smaller superconducting energy gap than the other electrode. At sufficiently low temperatures, non-equilibrium quasiparticles accumulate in the electrode with a smaller gap, leading to an increased density of quasiparticles at the junction and a corresponding decrease in the relaxation time. I present a model of this effect, use the model to extract the density of non-equilibrium quasiparticles in the device, and find the values of the two superconducting energy gaps.
We describe a possible implementation of the nanomechanical quantum superposition generation and detection scheme described in the preceding, companion paper (Armour A D and Blencowe M P 2008 New. J. Phys. 10 095004). The implementation is based on the circuit quantum electrodynamics (QED) set-up, with the addition of a mechanical degree of freedom formed out of a suspended, doubly-clamped segment of the superconducting loop of a dc SQUID located directly opposite the centre conductor of a coplanar waveguide (CPW). The relative merits of two SQUID based qubit realizations are addressed, in particular a capacitively coupled charge qubit and inductively coupled flux qubit. It is found that both realizations are equally promising, with comparable qubit–mechanical resonator mode as well as qubit–microwave resonator mode coupling strengths.