Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A versatile system for the study of light-matter interactions at the level of individual particles

Lorena C. Bianchet

Published Feb 25, 2022• 2 citations
Publisher

Abstract

In this thesis, a single-atom trap in a "Maltese cross'' geometry (MCG) was designed, built up and characterized. A MCG atom trap uses four in-vacuum lenses to achieve four-directional high-numerical-aperture optical coupling to single trapped atoms and small atomic arrays. Here, we describe the theoretical background, the design, and the optical methods used for trapping and cooling atoms in a MCG geometry optimized for high coupling efficiency. We also characterize the resulting properties of the trap and trapped atoms. For this propose we measure occupancy, loading rate, lifetime, temperature, fluorescence anti-bunching and trap frequencies using current best practices. We also report another use of the optical control and coupling offered by the MCG: we use the two on-trap-axis lenses to produce a 1D optical lattice, the sites of which are stochastically filled and emptied by the trap loading process. The two off-trap-axis lenses are used for imaging and single-mode collection. Correlations of single-mode and imaging fluorescence signals are then used to map the single-mode collection efficiency. We observe trap characteristics comparable to what has been reported for single-atom traps with one- or two-lens optical systems. This shows that four-direction high-NA coupling can be achieved with little reduction in trap performance. Finally, we conclude with the near-future plans of the experiment.

DOI
10.5821/dissertation-2117-364500

Related papers

Manipulating and measuring single atoms in the Maltese cross geometry

Lorena C. Bianchet, Natália Alves, Laura Zarraoa +2 more

Background: Optical microtraps at the focus of high numerical aperture (high-NA) imaging systems enable efficient collection, trapping, detection and manipulation of individual neutral atoms for quantum technology and studies of optical physics associated with super- and sub-radiant states. The recently developed “Maltese cross” geometry (MCG) atom trap uses four in-vacuum lenses to achieve four-directional high-NA optical coupling to single trapped atoms and small atomic arrays. This article presents the first extensive characterisation of atomic behaviour in a MCG atom trap. Methods: We employ a MCG system optimised for high coupling efficiency and characterise the resulting properties of the trap and trapped atoms. Using current best practices, we measure occupancy, loading rate, lifetime, temperature, fluorescence anti-bunching and trap frequencies. We also use the four-directional access to implement a new method to map the spatial distribution of collection efficiency from high-NA optics: we use the two on-trap-axis lenses to produce a 1D optical lattice, the sites of which are stochastically filled and emptied by the trap loading process. The two off-trap-axis lenses are used for imaging and single-mode collection. Correlations of single-mode and imaging fluorescence signals are then used to map the single-mode collection efficiency. Results: We observe trap characteristics comparable to what has been reported for single-atom traps with one- or two-lens optical systems. The collection efficiency distribution in the axial and transverse directions is directly observed to be in agreement with expected collection efficiency distribution from Gaussian beam optics. Conclusions: The multi-directional high-NA access provided by the Maltese cross geometry enables complex manipulations and measurements not possible in geometries with fewer directions of access, and can be achieved while preserving other trap characteristics such as lifetime, temperature, and trap size.

Open Research Europe•Mar 3, 2022•4 citations

Manipulating and measuring single atoms in the Maltese cross geometry

Lorena C. Bianchet, Natália Alves, Laura Zarraoa +2 more

Background: Optical microtraps at the focus of high numerical aperture (high-NA) imaging systems enable efficient collection, trapping, detection and manipulation of individual neutral atoms for quantum technology and studies of optical physics associated with super- and sub-radiant states. The recently developed “Maltese cross” geometry (MCG) atom trap uses four in-vacuum lenses to achieve four-directional high-NA optical coupling to single trapped atoms and small atomic arrays. This article presents the first extensive characterisation of atomic behaviour in a MCG atom trap. Methods: We employ a MCG system optimised for high coupling efficiency and characterise the resulting properties of the trap and trapped atoms. Using current best practices, we measure occupancy, loading rate, lifetime, temperature, fluorescence anti-bunching and trap frequencies. We also use the four-directional access to implement a new method to map the spatial distribution of collection efficiency from high-NA optics: we use the two on-trap-axis lenses to produce a 1D optical lattice, the sites of which are stochastically filled and emptied by the trap loading process. The two off-trap-axis lenses are used for imaging and single-mode collection. Correlations of single-mode and imaging fluorescence signals are then used to map the single-mode collection efficiency. Results: We observe trap characteristics comparable to what has been reported for single-atom traps with one- or two-lens optical systems. The collection efficiency distribution in the axial and transverse directions is directly observed to be in agreement with expected collection efficiency distribution from Gaussian beam optics. Conclusions: The multi-directional high-NA access provided by the Maltese cross geometry enables complex manipulations and measurements not possible in geometries with fewer directions of access, and can be achieved while preserving other trap characteristics such as lifetime, temperature, and trap size.

Open Research Europe•Sep 6, 2021•5 citations

Manipulating and measuring single atoms in the Maltese cross geometry

Lorena C. Bianchet, Natalia Fernandes de Oliveira Alves, Laura Zarraoa +2 more

We describe optical methods for trapping, cooling, and observing single $^{87}$Rb atoms in a four-lens "Maltese cross" geometry (MCG). The use of four high numerical-aperture lenses in the cardinal directions enables efficient collection of light from non-collinear directions, but also restricts the optical access for cooling and optical pumping tasks. We demonstrate three-dimensional atom localization with sub-wavelength precision, and present measurements of the trap lifetime, temperature and transverse trap frequency in this geometry. We observe a trap performance comparable to what has been reported for single-atom traps with one- or two-lens optical systems, and conclude that the additional coupling directions provided by the MCG come at little cost to other trap characteristics.

arXiv:2103.05783•Mar 9, 2021•0 citations

Maltese cross coupling to cold atoms in free space

Natalia Bruno, Lorena C. Bianchet, Nan Li +3 more

We demonstrate a novel geometry for strong coupling of light and matter in free space, i.e., without the use of optical cavities. Guided by optical metrology tools, we use a manual pick-and-place technique to precisely and stably position four high numerical aperture (NA=0.5) aspheric lenses along the four cardinal directions with their foci at a single central point. The geometry immediately doubles the available solid angle and thus the light-atom coupling relative to two-lens schemes, and will enable new trapping, excitation, and collection methods. We test the system by trapping a single 87Rb at the common focus and observing its fluorescence simultaneously from four directions. The fluorescence signals indicate both sub-Poissonian atom number statistics and photon anti-bunching, showing suitability for cold atom quantum optics.

•Feb 8, 2019•0 citations

Maltese cross coupling to individual cold atoms in free space

Natalia Bruno, Lorena C. Bianchet, Vindhiya Prakash +3 more

Rb atoms trapped at the common focus of four high numerical aperture (NA=0.5) aspheric lenses. We use an interferometrically-guided pick-and-place technique to precisely and stably position the lenses along the four cardinal directions with their foci at a single central point. The geometry gives right angle access to a single quantum emitter, and will enable new trapping, excitation, and collection methods. The fluorescence signals indicate both sub-Poissonian atom number statistics and photon anti-bunching, showing suitability for cold atom quantum optics.

arXiv:1902.03220•Optics Express•Oct 11, 2019•19 citations

Isolating and manipulating single atoms

M. McGovern

In this thesis we study: the dynamics leading to a near-deterministic preparation of single atoms in a microscopic optical dipole trap; the non destructive imaging and counting of trapped atoms; and a system for sorting single atoms between optical dipole traps using a high numerical aperture lens and a spatial light modulator. \n \nWe near-deterministically prepare trapped single Rubidium atoms by exposing them to a tailored light field which induces light assisted collisions. By preparing pairs of Rubidium atoms in an optical micro-trap we can study the outcome of light assisted collisions at the single event level. Using this knowledge we tailor the light such that each collision releases only enough energy for one atom of a colliding atom-pair to escape the trap. This thereby yields an 83% single atom loading efficiency. \n \n \nWe demonstrate a method to count small numbers of atoms held in a deep, microscopic optical dipole trap by collecting fluorescence from atoms exposed to a standing wave of light that is blue-detuned from resonance. While scattering photons, the atoms are cooled by a Sisyphus mechanism that results from the spatial variation in light intensity. The use of a small blue detuning limits the losses due to light assisted collisions, thereby making the method suitable for counting several atoms in a microscopic volume. \n \nWe create two overlapping one-dimensional optical lattices using a single laser beam, a spatial light modulator and a high numerical aperture lens. These lattices have the potential to trap single atoms, and using the dynamic capabilities of the spatial light modulator may shift and sort atoms to a minimum atom-atom separation of 1.52 µm. We show how a simple feedback circuit can compensate for the spatial light modulator's intensity modulation.

•Jan 1, 2012•0 citations
In this thesis, a single-atom trap in a "Maltese cross'' geometry (MCG) was designed, built up and characterized. A MCG atom trap uses four in-vacuum lenses to achieve four-directional high-numerical-aperture optical coupling to single trapped atoms and small atomic arrays. Here, we describe the theoretical background, the design, and the optical methods used for trapping and cooling atoms in a MCG geometry optimized for high coupling efficiency. We also characterize the resulting properties of the trap and trapped atoms. For this propose we measure occupancy, loading rate, lifetime, temperature, fluorescence anti-bunching and trap frequencies using current best practices. We also report another use of the optical control and coupling offered by the MCG: we use the two on-trap-axis lenses to produce a 1D optical lattice, the sites of which are stochastically filled and emptied by the trap loading process. The two off-trap-axis lenses are used for imaging and single-mode collection. Correlations of single-mode and imaging fluorescence signals are then used to map the single-mode collection efficiency. We observe trap characteristics comparable to what has been reported for single-atom traps with one- or two-lens optical systems. This shows that four-direction high-NA coupling can be achieved with little reduction in trap performance. Finally, we conclude with the near-future plans of the experiment.
Background: Optical microtraps at the focus of high numerical aperture (high-NA) imaging systems enable efficient collection, trapping, detection and manipulation of individual neutral atoms for quantum technology and studies of optical physics associated with super- and sub-radiant states. The recently developed “Maltese cross” geometry (MCG) atom trap uses four in-vacuum lenses to achieve four-directional high-NA optical coupling to single trapped atoms and small atomic arrays. This article presents the first extensive characterisation of atomic behaviour in a MCG atom trap. Methods: We employ a MCG system optimised for high coupling efficiency and characterise the resulting properties of the trap and trapped atoms. Using current best practices, we measure occupancy, loading rate, lifetime, temperature, fluorescence anti-bunching and trap frequencies. We also use the four-directional access to implement a new method to map the spatial distribution of collection efficiency from high-NA optics: we use the two on-trap-axis lenses to produce a 1D optical lattice, the sites of which are stochastically filled and emptied by the trap loading process. The two off-trap-axis lenses are used for imaging and single-mode collection. Correlations of single-mode and imaging fluorescence signals are then used to map the single-mode collection efficiency. Results: We observe trap characteristics comparable to what has been reported for single-atom traps with one- or two-lens optical systems. The collection efficiency distribution in the axial and transverse directions is directly observed to be in agreement with expected collection efficiency distribution from Gaussian beam optics. Conclusions: The multi-directional high-NA access provided by the Maltese cross geometry enables complex manipulations and measurements not possible in geometries with fewer directions of access, and can be achieved while preserving other trap characteristics such as lifetime, temperature, and trap size.
Background: Optical microtraps at the focus of high numerical aperture (high-NA) imaging systems enable efficient collection, trapping, detection and manipulation of individual neutral atoms for quantum technology and studies of optical physics associated with super- and sub-radiant states. The recently developed “Maltese cross” geometry (MCG) atom trap uses four in-vacuum lenses to achieve four-directional high-NA optical coupling to single trapped atoms and small atomic arrays. This article presents the first extensive characterisation of atomic behaviour in a MCG atom trap. Methods: We employ a MCG system optimised for high coupling efficiency and characterise the resulting properties of the trap and trapped atoms. Using current best practices, we measure occupancy, loading rate, lifetime, temperature, fluorescence anti-bunching and trap frequencies. We also use the four-directional access to implement a new method to map the spatial distribution of collection efficiency from high-NA optics: we use the two on-trap-axis lenses to produce a 1D optical lattice, the sites of which are stochastically filled and emptied by the trap loading process. The two off-trap-axis lenses are used for imaging and single-mode collection. Correlations of single-mode and imaging fluorescence signals are then used to map the single-mode collection efficiency. Results: We observe trap characteristics comparable to what has been reported for single-atom traps with one- or two-lens optical systems. The collection efficiency distribution in the axial and transverse directions is directly observed to be in agreement with expected collection efficiency distribution from Gaussian beam optics. Conclusions: The multi-directional high-NA access provided by the Maltese cross geometry enables complex manipulations and measurements not possible in geometries with fewer directions of access, and can be achieved while preserving other trap characteristics such as lifetime, temperature, and trap size.
We describe optical methods for trapping, cooling, and observing single 87^{87}87Rb atoms in a four-lens "Maltese cross" geometry (MCG). The use of four high numerical-aperture lenses in the cardinal directions enables efficient collection of light from non-collinear directions, but also restricts the optical access for cooling and optical pumping tasks. We demonstrate three-dimensional atom localization with sub-wavelength precision, and present measurements of the trap lifetime, temperature and transverse trap frequency in this geometry. We observe a trap performance comparable to what has been reported for single-atom traps with one- or two-lens optical systems, and conclude that the additional coupling directions provided by the MCG come at little cost to other trap characteristics.
We demonstrate a novel geometry for strong coupling of light and matter in free space, i.e., without the use of optical cavities. Guided by optical metrology tools, we use a manual pick-and-place technique to precisely and stably position four high numerical aperture (NA=0.5) aspheric lenses along the four cardinal directions with their foci at a single central point. The geometry immediately doubles the available solid angle and thus the light-atom coupling relative to two-lens schemes, and will enable new trapping, excitation, and collection methods. We test the system by trapping a single 87Rb at the common focus and observing its fluorescence simultaneously from four directions. The fluorescence signals indicate both sub-Poissonian atom number statistics and photon anti-bunching, showing suitability for cold atom quantum optics.
Rb atoms trapped at the common focus of four high numerical aperture (NA=0.5) aspheric lenses. We use an interferometrically-guided pick-and-place technique to precisely and stably position the lenses along the four cardinal directions with their foci at a single central point. The geometry gives right angle access to a single quantum emitter, and will enable new trapping, excitation, and collection methods. The fluorescence signals indicate both sub-Poissonian atom number statistics and photon anti-bunching, showing suitability for cold atom quantum optics.
In this thesis we study: the dynamics leading to a near-deterministic preparation of single atoms in a microscopic optical dipole trap; the non destructive imaging and counting of trapped atoms; and a system for sorting single atoms between optical dipole traps using a high numerical aperture lens and a spatial light modulator. \n \nWe near-deterministically prepare trapped single Rubidium atoms by exposing them to a tailored light field which induces light assisted collisions. By preparing pairs of Rubidium atoms in an optical micro-trap we can study the outcome of light assisted collisions at the single event level. Using this knowledge we tailor the light such that each collision releases only enough energy for one atom of a colliding atom-pair to escape the trap. This thereby yields an 83% single atom loading efficiency. \n \n \nWe demonstrate a method to count small numbers of atoms held in a deep, microscopic optical dipole trap by collecting fluorescence from atoms exposed to a standing wave of light that is blue-detuned from resonance. While scattering photons, the atoms are cooled by a Sisyphus mechanism that results from the spatial variation in light intensity. The use of a small blue detuning limits the losses due to light assisted collisions, thereby making the method suitable for counting several atoms in a microscopic volume. \n \nWe create two overlapping one-dimensional optical lattices using a single laser beam, a spatial light modulator and a high numerical aperture lens. These lattices have the potential to trap single atoms, and using the dynamic capabilities of the spatial light modulator may shift and sort atoms to a minimum atom-atom separation of 1.52 µm. We show how a simple feedback circuit can compensate for the spatial light modulator's intensity modulation.