Heating rate measurements in a prototype surface-electrode trap for optical frequency metrology

Clément Lacroûte, T. Lauprêtre, Bachir Achi, Lucas Groult, Y. Kersalé, Marion Delehaye, Moustafa Abdel Hafiz

Published Jun 20, 2022• 0 citations

Abstract

In this talk, I will review our recent work on the development of a compact, optical atomic clock based on trapped Yb+ ions. We have developed a simple surface-electrodes microtrap designed towards optical frequency metrology. After reviewing the advantages of microtraps for single-ion optical clocks, I will show our experimental results of heating rate measurements with a simple prototype trap.

Related papers

Progress on a Surface-Electrode Ion Trap for Optical Frequency Metrology

Marion Delehaye, Y. Kersalé, Clément Lacroûte +8 more

We present our latest results obtained with a surface-electrode ion trap designed for optical frequency metrology. A prototype trap, based on a simple geometry realized on a printed-circuit board, has been successfully used to trap single Yb+ions. Our long-term goal is the realization of a compact single-ion optical clock.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)Apr 1, 20190 citations

Preliminary characterization of a surface electrode Paul trap for frequency metrology

Josipa Madunic, Lucas Groult, Bachir Achi +7 more

Abstract We are developing a single-ion optical clock based on a surface-electrode (SE) trap that we will operate with 171Yb+ ions on the electric quadrupole transition at 435.5 nm. We present heating rate measurements performed with a prototype SE trap. We also introduce a new, micro-fabricated SE trapping chip using silicon on insulator technology. Electric tests were performed under ultra-high vacuum using a testing chip, including breakdown voltages measurements and flashover detection. We present suitable trapping parameters for this chip, as well as a road-map for improving its design.

arXiv:2410.06639Journal of Physics Conference SeriesNov 1, 20240 citations

Using surface-electrodes ion traps for optical frequency metrology

Clément Lacroûte, Josipa Madunic, T. Lauprêtre +5 more

In this talk, I will briefly review state-of-the-art optical atomic clocks and their potential applications for field measurements. I will then present our transportable optical clock project and the progress made in the design and fabrication of surface-electrodes ion traps

Oct 25, 20230 citations

Towards a compact Yb+ ion optical clock

Clément Lacroûte, Maël Souidi, Marion Delehaye +5 more

Optical atomic clocks are the world's most accurateinstruments. Even though they are still voluminous instruments, there is a needfor on-field measurements campaigns. I will first give a brief state-of-the-artof optical atomic clocks, and then review existing approaches towards therealization of transportable atomic clocks. Finally, I will introduce thedesign of our prototype surface electrode trap for optical frequency metrology. <!--[if gte mso 9]>

Oct 10, 20160 citations

Compact Yb+optical atomic clock project: design principle and current status

Clément Lacroûte, Maël Souidi, Pierre-Yves Bourgeois +6 more

We present the design of a compact optical clock based on the 2 S 1/2 → 2 D 3/2 435.5 nm transition in 171 Yb + . The ion trap will be based on a micro-fabricated circuit, with surface electrodes generating a trapping potential to localize a single Yb ion a few hundred μ m from the electrodes. We present our trap design as well as simulations of the resulting trapping pseudo-potential. We also present a compact, multi-channel wavelength meter that will permit the frequency stabilization of the cooling, repumping and clear-out lasers at 369.5 nm, 935.2 nm and 638.6 nm needed to cool the ion. We use this wavelength meter to characterize and stabilize the frequency of extended cavity diode lasers at 369.5 nm and 638.6 nm.

arXiv:1603.05816Journal of Physics Conference SeriesJun 1, 201620 citations

Characterization of a surface electrode Paul trap for frequency metrology

Josipa Madunic, Moustafa Abdel Hafiz, Y. Kersalé +1 more

We report on the progress on a single-ion optical clock that is being developed at the FEMTO-ST institute. Our objective is to reach a fractional frequency stability of the order of 10-14 at one second for a total volume well below 500 L. The experimental setup is based on a surface electrode single-ion trap. A new trapping chip was designed and produced at the local cleanroom facility, using deep reactive-ion etching (DRIE) on a silicon on insulator- (SOI) wafer. Paul traps require a source of highly-stable and low noise voltage in the radio-frequency (RF) domain. A resonator of our own design has been used to supply high voltage to the trap. We have developed and implemented techniques for 3D micromotion reduction in order to minimize the 2nd order Doppler shift. Indeed, for Yb+ optical spectroscopy, second order Doppler shift and Stark shift due to the ac fields can contribute significantly to the uncertainty budget. We will present the latest results of the trap characterization, which should include lifetime and heating rate measurements of the trap.

May 15, 20230 citations