Based on Quantum illumination (QI) protocol, researcshers have developed prototypes of quantum radar and demonstrated its quantum enhancement. Nevertheless, there are still difficulties in the practical application for QI radar, especially the trade-off between the detection range and quantum enhancement, as well as the construction of the optimized receiver. Some studies have suggested that the potential solutions to these difficulties are to deploy the quantum limited amplifiers in QI radars, and have envisioned different amplification schemes. In this paper, we establish a universal and effective method to evaluate the signal-to-noise ratio of QI radar. It connects QI radar theory with classical radar signal processing theory, providing support for researchers to evaluate the performance of various QI radar schemes from a radar perspective. Based on this method, we prove that any quantum limited phase-insensitive amplification scheme will seriously weaken the quantum enhancement of QI radar. Furthermore, we also demonstrate that the QI radar with phase-sensitive amplified idler has no advantage over the optimal classical illumination. These results can help us avoid some unreasonable QI radar schemes. In addition, we believe that the proposed method can also be applied to explore other potential QI radar schemes and contribute to promoting the application development of QI radar.
Based on Quantum illumination (QI) protocol, researcshers have developed prototypes of quantum radar and demonstrated its quantum enhancement. Nevertheless, there are still difficulties in the practical application for QI radar, especially the trade-off between the detection range and quantum enhancement, as well as the construction of the optimized receiver. Some studies have suggested that the potential solutions to these difficulties are to deploy the quantum limited amplifiers in QI radars, and have envisioned different amplification schemes. In this paper, we establish a universal and effective method to evaluate the signal-to-noise ratio of QI radar. It connects QI radar theory with classical radar signal processing theory, providing support for researchers to evaluate the performance of various QI radar schemes from a radar perspective. Based on this method, we prove that any quantum limited phase-insensitive amplification scheme will seriously weaken the quantum enhancement of QI radar. Furthermore, we also demonstrate that the QI radar with phase-sensitive amplified idler has no advantage over the optimal classical illumination. These results can help us avoid some unreasonable QI radar schemes. In addition, we believe that the proposed method can also be applied to explore other potential QI radar schemes and contribute to promoting the application development of QI radar.
Abstract Based on quantum illumination (QI) protocol, microwave quantum radar has been developed, which has attracted great interest from radar researchers. While, according to the QI protocol, the quantum advantage of QI radar is related to the power of generated signal, which may lead to a trade‐off between its quantum advantage and the maximum detection range. However, the maximum detection range is an important indicator to measure the performance of the radar. Therefore, it is necessary to quantitatively analyse the maximum detection range and quantum advantages of microwave QI radar, which will help us understand its performance from the perspective of radar applications and further evaluate the potential application scenarios and future research directions of it. The microwave quantum radar equation is developed, by the authors, based on the classical radar equation with the consideration of the quantum properties of extremely weak signals. Then, the maximum detection range of QI radar and classical two mode noise radar in different microwave bands is comprehensively compared and analysed. The possible applications of microwave QI radars in different bands are also discussed. In addition, the authors demonstrate that the symmetrical quantum limited amplification actually has no contribution to improving the detection range of a QI radar.
It has been proved that quantum illumination (QI) radar has the quantum advantages in error-probability exponent. However, the error-probability exponent is not a recognized figure of merit in the radar literature, nor does it correspond in a straightforward manner to any such figure of merit. Signal to noise ratio (SNR) gain is an important criterion in radar theory. While, the theoretical analysis of quantum enhancement in SNR gain of QI radar has not been reported. In this paper, we compare the physical fundamental of matched filter (MF), which can achieve the optimal SNR gain under white noise in classical radar theory, and phase conjugation (PC) receiver. Furthermore, the quantum enhancement of SNR gain in QI radar is studied. It is shown that QI radar with practical receivers can achieve about 3dB quantum advantage in SNR gain. In addition, in the case of extremely weak signal, it can potentially achieve tens of dB enhancement in SNR gain compared with the MF based classical radar.
Microwave quantum illumination (QI) represents a paradigm shift in low-power wireless radar detection, leveraging entanglement between signal and idler microwave photons to achieve detection performance exceeding classical limits by up to 6 dB in error exponent, particularly in high-noise environments where traditional coherent radars falter. This comprehensive survey delineates the theoretical foundations and practical protocols of microwave QI, beginning with two-mode squeezed vacuum state generation using Josephson parametric amplifiers in cryogenic setups, which produce highly correlated photon pairs resilient to channel decoherence. Receiver architectures, including optical parametric amplifier-single-photon avalanche diode (OPA-SPADE) systems with sum-frequency generation for joint measurements and digital phase-conjugation for computational correlation recovery, enable efficient extraction of quantum discord even after significant atmospheric loss or low target reflectivity (under 1%).Performance analyses under realistic thermal noise models ( ) and -loss channels confirm sustained quantum advantages via the quantum Chernoff exponent , validated by ray-tracing simulations showing doubled detection range at fixed power and lab experiments at 10 GHz carriers detecting weak reflectors amid 100 K noise. Low-power optimizations such as adaptive entanglement tuning, chirped pulse shaping, and neural network-aided parameter selection yield 50% energy reductions without sacrificing fidelity, making QI viable for battery-limited platforms. Applications encompass short-range automotive/UAV radar for fog-penetrating obstacle avoidance, non-invasive biomedical subsurface imaging with safe radiation levels, covert perimeter security against jamming, and seamless integration into 6G networks via joint communication-sensing waveforms at mm Wave/THz bands. The paper identifies key challenges including multi-target scalability, real-time gigascale processing, and quantum RF interface standardization, proposing hybrid quantum-classical frameworks and entanglement-swapped sensor arrays as pathways to deployment. This work bridges quantum optics with RF engineering, equipping researchers with blueprints for prototyping transformative quantum-enhanced wireless sensing systems.
Quantum illumination radars rely on quantum sources of two-mode squeezing vacuum to produce signals with quantum-enhanced correlations. The recent demonstration of quantum radar transmitters in the laboratory has shown promising progress in the technology. Amplification of the faint quantum signals is however necessary in order to make quantum radars practical. Here we discuss the possibility of amplifying quantum signals while preserving a quantum advantage. We find that amplifying both signals equally cannot beat an ideal source of classically correlated signals, but does provide a quantum advantage over noisy classical sources. We also briefly discuss other amplifications scheme that may provide further enhancements.
We propose a hetero-homodyne receiver for quantum illumination (QI) target detection. Unlike prior QI receivers, it uses a cascaded positive operator-valued measurement (POVM) that does not require a quantum interaction between QI's returned radiation and its stored idler. When used without sequential detection its performance matches the 3-dB quantum advantage over optimum classical illumination (CI) that Guha and Erkmen's [Phys. Rev. A 80, 052310 (2009)] phase-conjugate and parametric amplifier receivers enjoy. When used in a sequential detection QI protocol, the hetero-homodyne receiver offers a 9-dB quantum advantage over a conventional CI radar, and a 3-dB advantage over a CI radar with sequential detection. Our work is a significant step forward toward a practical quantum radar for the microwave region, and, more generally, emphasizes the potential offered by cascaded POVMs for quantum radar.
Quantum illumination has been suggested as a way to improve the sensitivity of remote target detection by taking advantage of quantum entanglement between a traveling electromagnetic beam of light interrogating the target, and a second beam kept in the lab. In the microwave domain, superconducting quantum circuit utilizing superconducting Josephson tunnel junctions can be used as quantum-limited amplifiers of faint microwave signals, as well as bright sources of quantum entangled signals. These Josephson parametric amplifiers (JPAs) are poised to become fundamental building block in a future quantum illumination radar operating in the microwave domain. Demonstrating a practical advantage of quantum illumination with ambient temperature signals is, however, challenging. Indeed, current quantum protocols are not practical as they require a complex receiver with stringent phase-matching conditions, which cannot be met in the field. Notably, it is also not currently known how one can transfer faint microwave signals out of cryogenic systems without destroying their fragile entanglement. In this article, we discuss the recent progress and challenges regarding the development of an all-microwave quantum illumination radar using the recently developed and implemented quantum-enhanced noise radar protocol. This quantum illumination protocol is simpler to implement and procures a quantum enhancement over its classical analog. Finally, we discuss different strategies that may resolve the issue of transmitting microwave entanglement under ambient conditions. We, thus, conclude that successful transmission of entangled microwaves can be done in the near future, with possible demonstrations of practical quantum advantage over short distances.