Abstract The gate-based model is one of the leading quantum computing paradigms for representing quantum circuits. Within this paradigm, a quantum algorithm is expressed in terms of a set of quantum gates that are executed on the quantum hardware over time, subject to a number of constraints whose satisfaction must be guaranteed before running the circuit, to allow for feasible execution. The need to guarantee the previous feasibility condition gives rise to the Quantum Circuit Compilation Problem (QCCP). The QCCP has been demonstrated to be NP-Complete, and can be considered as a Planning and Scheduling problem. In this paper, we consider quantum compilation instances deriving from the general Quantum Approximation Optimization Algorithm (QAOA), applied to the MaxCut problem, devised to be executed on Noisy Intermediate Scale Quantum (NISQ) hardware architectures. More specifically, in addition to the basic QCCP version, we also tackle other variants of the same problem such as the QCCP-X (QCCP with crosstalk constraints), the QCCP-V (QCCP with variable qubit state initialization), as well as the QCCP-VX that includes both previous variants. All problem variants are solved using genetic algorithms. We perform an experimental study across a conventional set of instances taken from the literature, and show that the proposed genetic algorithm, termed $$GA_{VX}$$ G A VX , outperforms previous approaches in the literature.
Abstract The gate-based model is one of the leading quantum computing paradigms for representing quantum circuits. Within this paradigm, a quantum algorithm is expressed in terms of a set of quantum gates that are executed on the quantum hardware over time, subject to a number of constraints whose satisfaction must be guaranteed before running the circuit, to allow for feasible execution. The need to guarantee the previous feasibility condition gives rise to the Quantum Circuit Compilation Problem (QCCP). The QCCP has been demonstrated to be NP-Complete, and can be considered as a Planning and Scheduling problem. In this paper, we consider quantum compilation instances deriving from the general Quantum Approximation Optimization Algorithm (QAOA), applied to the MaxCut problem, devised to be executed on Noisy Intermediate Scale Quantum (NISQ) hardware architectures. More specifically, in addition to the basic QCCP version, we also tackle other variants of the same problem such as the QCCP-X (QCCP with crosstalk constraints), the QCCP-V (QCCP with variable qubit state initialization), as well as the QCCP-VX that includes both previous variants. All problem variants are solved using genetic algorithms. We perform an experimental study across a conventional set of instances taken from the literature, and show that the proposed genetic algorithm, termed GAVX G A VX , outperforms previous approaches in the literature.
The Quantum Circuit Compilation Problem (QCCP) is challenging to the Artificial Intelligence community. It was already tackled with temporal planning, constraint programming, greedy heuristics and other techniques. In this paper, QCCP is formulated as a scheduling problem and solved by a genetic algorithm. We focus on QCCP for Quantum Approximation Optimization Algorithms (QAOA) applied to the MaxCut problem and consider Noisy Intermediate Scale Quantum (NISQ) hardware architectures. Based on the fact that these algorithms apply a set of basic quantum operations repeatedly over a number of rounds, we propose a genetic algorithm approach, termed Decomposition Based Genetic Algorithm (DBGA), that in each round extends the partial solutions obtained for the previous ones. DBGA is compared to the state of the art across a set of conventional instances. The results of the experimental study provided interesting insight in the problem structure and showed that DBGA is quite competitive with the state of the art. In particular, DBGA outperformed the best current method on the largest instances and provided new best solutions to most of them.
Compiling quantum circuits on target quantum hardware architectures is one of the key issues in the development of quantum algorithms, and the related problem is known as the Quantum Circuit Compilation Problem (QCCP). This paper presents a genetic algorithm for solving QCCP instances for Quantum Approximate Optimization Algorithms (QAOA). In particular, such instances represent quantum circuits for the resolution of both MaxCut and Graph-Coloring combinatorial problems. The presented algorithm represents a significant improvement over an already existing genetic algorithm called Decomposition Based Genetic Algorithm (DBGA), and is characterized by a completely new coding scheme that allows to reduce the number of SWAP gates introduced in the decoding step, consequently reducing the circuit depth. After providing a description of the problem, this paper presents the newly produced genetic algorithm (termed DBGA-X) in detail, especially focusing on the new coding/decoding scheme. Subsequently, a set of results will be presented that demonstrate the superior performance of the new method compared with the results obtained from recent literature against the same benchmark. In addition, new benchmarks characterized by larger quantum architectures and by a higher number of compilation passes are proposed in this paper, to the aim of testing the scalability of the proposed method in more realistic scenarios.
Quantum algorithms will likely play a key role in future high-performance-computing (HPC) environments. These algorithms are typically expressed as quantum circuits composed of arbitrary gates or as unitary matrices. Executing these on physical devices, however, requires translation to device-compatible circuits, in a process called quantum compilation or circuit synthesis, since these devices support a limited number of native gates. Moreover, these devices typically have specific qubit topologies, which constrain how and where gates can be applied. Consequently, logical qubits in input circuits and unitaries may need to be mapped to and routed between physical qubits. Furthermore, current Noisy Intermediate-Scale Quantum (NISQ) devices present additional constraints. They are vulnerable to errors during gate application and their short decoherence times lead to qubits rapidly succumbing to accumulated noise and possibly corrupting computations. Therefore, circuits synthesized for NISQ devices need to minimize gates and execution times. The problem of synthesizing device-compatible circuits, while optimizing for low gate count and short execution times, can be shown to be computationally intractable using analytical methods. Therefore, interest has grown towards heuristics-based synthesis techniques, which are able to produce approximations of the desired algorithm, while optimizing depth and gate-count. In this work, we investigate using genetic algorithms (GA)—a proven gradient-free optimization technique based on natural selection—for circuit synthesis. In particular, we formulate the quantum synthesis problem as a multi-objective optimization (MOO) problem, with the objectives of minimizing the approximation error, number of multi-qubit gates, and circuit depth. We also employ fuzzy logic for runtime parameter adaptation of GA to enhance search efficiency and solution quality in our proposed method.
Computationally expensive applications, including machine learning, chemical simulations, and financial modeling, are promising candidates for noisy intermediate scale quantum (NISQ) computers. In these problems, one important challenge is mapping a quantum circuit onto NISQ hardware while satisfying physical constraints of an underlying quantum architecture. Quantum circuit compilation (QCC) aims to generate feasible mappings such that a quantum circuit can be executed in a given hardware platform with acceptable confidence in outcomes. Physical constraints of a NISQ computer change frequently, requiring QCC process to be repeated often. When a circuit cannot directly be executed on a quantum hardware due to its physical limitations, it is necessary to modify the circuit by adding new quantum gates and auxiliary qubits, increasing its space and time complexity. An inefficient QCC may significantly increase error rate and circuit latency for even the simplest algorithms. In this article, we present artificial intelligence (AI)-based and heuristic-based methods recently reported in the literature that attempt to address these QCC challenges. We group them based on underlying techniques that they implement, such as AI algorithms including genetic algorithms, genetic programming, ant colony optimization and AI planning, and heuristics methods employing greedy algorithms, satisfiability problem solvers, dynamic, and graph optimization techniques. We discuss performance of each QCC technique and evaluate its potential limitations.
Quantum computing emerges as a promising direction for high-performance computing in the post-Moore era. Leveraging quantum mechanical properties, quantum devices can theoretically provide significant speedup over classical computers in certain problem domains. Quantum algorithms are typically expressed as quantum circuits composed of quantum gates, or as unitary matrices. Execution of quantum algorithms on physical devices requires translation to machine-compatible circuits -- a process referred to as quantum compilation or synthesis. Quantum synthesis is a challenging problem. Physical quantum devices support a limited number of native basis gates, requiring synthesized circuits to be composed of only these gates. Moreover, quantum devices typically have specific qubit topologies, which constrain how and where gates can be applied. Consequently, logical qubits in input circuits and unitaries may need to be mapped to and routed between physical qubits on the device. Current Noisy Intermediate-Scale Quantum (NISQ) devices present additional constraints, through their gate errors and high susceptibility to noise. NISQ devices are vulnerable to errors during gate application and their short decoherence times leads to qubits rapidly succumbing to accumulated noise and possibly corrupting computations. Therefore, circuits synthesized for NISQ devices need to have a low number of gates to reduce gate errors, and short execution times to avoid qubit decoherence. The problem of synthesizing device-compatible quantum circuits, while optimizing for low gate count and short execution times, can be shown to be computationally intractable using analytical methods. Therefore, interest has grown towards heuristics-based compilation techniques, which are able to produce approximations of the desired algorithm to a required degree of precision. In this work, we investigate using Genetic Algorithms (GAs) -- a proven gradient-free optimization technique based on natural selection -- for circuit synthesis. In particular, we formulate the quantum synthesis problem as a multi-objective optimization (MOO) problem, with the objectives of minimizing the approximation error, number of multi-qubit gates, and circuit depth. We also employ fuzzy logic for runtime parameter adaptation of GA to enhance search efficiency and solution quality of our proposed quantum synthesis method.
Quantum Computing represents the next big step towards speed boost in computation, which promises major breakthroughs in several disciplines including Artificial Intelligence. This paper investigates the performance of a genetic algorithm to optimize the realization (compilation) of nearest-neighbor compliant quantum circuits. Currrent technological limitations (e.g., decoherence effect) impose that the overall duration (makespan) of the quantum circuit realization be minimized, and therefore the makespanminimization problem of compiling quantum algorithms on present or future quantum machines is dragging increasing attention in the AI community. In our genetic algorithm, a solution is built utilizing a novel chromosome encoding where each gene controls the iterative selection of a quantum gate to be inserted in the solution, over a lexicographic double-key ranking returned by a heuristic function recently published in the literature.Our algorithm has been tested on a set of quantum circuit benchmark instances of increasing sizes available from the recent literature. We demonstrate that our genetic approach obtains very encouraging results that outperform the solutions obtained in previous research against the same benchmark, succeeding in significantly improving the makespan values for a great number of instances.