The immense potential of the Internet of Things (IoT) is challenged by grave security vulnerabilities that are easily exploitable in resource-constrained environments. We propose a lightweight Authentication and Key Agreement (AKA) protocol to derive a shared session key for each communicating node in amutually communicating cluster of IoT nodes. Each IoT device is embedded with a Physically Unclonable Function (PUF), and a Fuzzy Extractor (FE) is deployed to correct and reproduce the private key and public helper data pair from the possibly erroneous PUF response. This secret raw PUF response is not stored explicitly in the server. A forward-secure authenticated key agreement is achieved by incorporating Elliptic Curve Diffie-Hellman Key Exchange (ECDH) protocol. The security of the proposed scheme has been formally verified while considering both active and passive attackers using the Verifpal tool. A prototype implementation with the Arbiter PUF circuit, FE, and associated software has successfully demonstrated the efficacy of our scheme.
The immense potential of the Internet of Things (IoT) is challenged by grave security vulnerabilities that are easily exploitable in resource-constrained environments. We propose a lightweight Authentication and Key Agreement (AKA) protocol to derive a shared session key for each communicating node in amutually communicating cluster of IoT nodes. Each IoT device is embedded with a Physically Unclonable Function (PUF), and a Fuzzy Extractor (FE) is deployed to correct and reproduce the private key and public helper data pair from the possibly erroneous PUF response. This secret raw PUF response is not stored explicitly in the server. A forward-secure authenticated key agreement is achieved by incorporating Elliptic Curve Diffie-Hellman Key Exchange (ECDH) protocol. The security of the proposed scheme has been formally verified while considering both active and passive attackers using the Verifpal tool. A prototype implementation with the Arbiter PUF circuit, FE, and associated software has successfully demonstrated the efficacy of our scheme.
Device authentication and key exchange protocol are essential front line of access controls in IoT security, and physical unclonable function (PUF) is a key enabler to lightweight, low-power and secure authentication of internet enabled endpoint devices in IoT. Current PUF-enabled authentication protocol requires the verifier to store a sufficiently large number of challenge-response pairs (CRPs) of each of its interlocutors, which makes the protocol impractical in application scenarios where the verifier is a resource-constrained device, especially when the verifier needs to communicate with multiple PUF- embedded endpoints. To solve this problem, a new lightweight PUF-based mutual authentication and key-exchange protocol is proposed in this paper to allow two resource-constrained PUF embedded endpoint devices to authenticate each other without the need to store the CRPs locally, and simultaneously establish the session key for secure data exchange without resorting to public-key algorithm. The PUF response reliability is mitigated by the use of reverse fuzzy extractor to offload the compute- intensive error decoding to the server during the initialization phase of the protocol. The proposed protocol is evaluated using ProVerif to corroborate its secrecy, mutual authenticity as well as resistance against replay and man-in-the-middle attacks.
We propose a lightweight end-to-end authentication and key-exchange protocol for resource-constrained IoT devices that avoids computationally expensive cryptographic operations by leveraging Physically Unclonable Functions (PUFs) and employs a lightweight Fuzzy Extractor (FE) to reliably handle PUF noise. The protocol relies exclusively on lightweight hash, XOR, and symmetric encryption/decryption operations. Moreover, the proposed protocol mitigates the storage overhead by avoiding the maintenance of large CRP repositories at the server. Security properties are formally verified using the scyther tool. A prototype implementation using two ESP32-based IoT nodes and a server further demonstrates its practicality for real-world deployments. Finally, benchmarking against state-of-the-art schemes indicates that the proposed protocol incurs comparatively low computation time and communication cost, highlighting its efficiency and lightweight nature.
Device authentication and key exchange are essential issues for Internet of Things (IoT) which plays an indispensable role in modern life. Many sensor devices in IoT, with limited resources and poor self-protection capabilities, are deployed in the unattended and open places, making them vulnerable to physical attacks while facing traditional security threats. Despite several researches have been conducted by using the physical unclonable function (PUF) to immune the communication between IoT devices from the security threats above, as per the knowledge of the authors, current solutions rely on the participation of the server to distribute the key parameters, which requires high message overhead and markedly influences the efficiency. To fill this gap, this article proposes an end-to-end mutual authentication and key exchange protocol for IoT by combining PUF with certificateless public key cryptography (CL-PKC) on elliptic curve, which only needs “three handshakes” without the real-time participation of the server. The security analysis shows that the proposed protocol can not only secure the IoT devices from various attacks, but also provide perfect forward secrecy. Moreover, the experimental validation and performance analysis show the proposed protocol outperforms existing related protocols in terms of security features, protocol rounds and communication cost.
Peer to Peer (P2P) or direct connection IoT has become increasingly popular owing to its lower latency and higher privacy compared to database-driven or server-based IoT. However, wireless vulnerabilities raise severe concerns on IoT device-to-device communication. This is further aggravated by the challenge to achieve lightweight direct mutual authentication and secure key exchange between IoT peer nodes in P2P IoT applications. Physical unclonable function (PUF) is a key enabler to lightweight, low-power and secure authentication of resource-constrained devices in IoT. Nevertheless, current PUF-enabled authentication protocols, with or without the challenge-response pairs (CRPs) of each of its interlocutors stored in the verifier’s side, are incompatible for P2P IoT scenarios due to the security, storage and computing power limitations of IoT devices. To solve this problem, a new lightweight PUF-based mutual authentication and key-exchange protocol is proposed. It allows two resource-constrained PUF embedded endpoint devices to authenticate each other directly without the need for local storage of CRP or any private secrets, and simultaneously establish the session key for secure data exchange without resorting to public-key algorithm. The proposed protocol is evaluated using the Mao and Boyd logic as well as the automatic security analysis tool ProVerif to corroborate its mutual authenticity, secrecy, and resistance against replay and man-in-the-middle attacks. Using two Avnet Ultra96-V2 boards to emulate the two IoT endpoint devices of a network, a physical prototype system is also constructed to demonstrate and validate the feasibility of the proposed secure P2P connection scheme.
The advent of Internet of Things (IoT) ushers in a significant potential to integrate individuals, devices, and data, leading to a profound change in our professional and social environments. The small, resource-constrained IoT devices are usually deployed to collect various types of critical data in remote or unmonitored locations. Due to extensive interconnectivity, limited resources, and inadequate security design, IoT systems are vulnerable to communication-specific cyber threats, which aim to disrupt operations, steal sensitive information, or cause damage. To resolve the security concerns in IoT communications, many recent efforts have been devoted to designing authenticated key agreement protocols for IoT systems. However, not only most of the existing solutions fail to adopt cost-effective techniques for resource-limited IoT devices, but also they ignore the differentiation among various data types in the established session keys. A few approaches use traditional physical unclonable functions (PUFs) to address resource concerns, yet they introduce new security issues into IoT systems. Once the PUF cryptographic information is compromised by machine learning attacks, the entire authentication framework collapses. Therefore, in this paper we propose an authenticated key agreement protocol for device-to-gateway communication in IoT systems based on Chebyshev polynomial and probability-based PUF. We examine the proposed protocol’s security features through formal security validation. We also conduct performance evaluation through a simulation-oriented study, and the results clearly prove that the proposed protocol offers superior security and privacy, while maintaining low computational overhead.
The rapid proliferation of the Internet of Things (IoT) has connected billions of devices that continuously exchange sensitive data over public wireless channels, making secure authentication a critical requirement. However, most IoT end devices are severely resource-constrained, which renders conventional public-key infrastructures based on RSA, bilinear pairings, or digital certificates impractical. Although many authentication and key agreement schemes have been proposed, recent cryptanalytic studies show that they often either omit essential security properties such as perfect forward secrecy or resistance to ephemeral secret leakage or incur overhead that is unacceptable for low-power nodes. To address this gap, this paper proposes a lightweight Elliptic Curve Cryptography (ECC)-based authentication and key agreement protocol for a three-tier IoT architecture consisting of a user, a semi-trusted gateway server, and an IoT sensor. The protocol relies solely on elliptic-curve scalar multiplication, one-way hash functions, and bitwise XOR operations, avoiding bilinear pairings and certificate management. It achieves mutual authentication among all three parties through timestamped, hash-based authenticators and establishes a contributory session-key derived from fresh ephemeral keys, ensuring perfect forward secrecy. The security of the protocol is established through a detailed informal analysis, demonstrating resistance to major attacks, and is formally verified using the AVISPA tool, where both the OFMC and CL-AtSe back-ends report the protocol as SAFE under the Dolev–Yao adversary model. A comparative performance evaluation against several recent ECC-based authentication schemes shows that the proposed protocol maintains low cost requirements suitable for constrained IoT devices, and resulting in a communication overhead of 1828 bits, which is competitive with most recent ECC-based schemes evaluated, and imposing a minimal storage burden on end devices. The results demonstrate that the proposed protocol achieves a favorable balance between security and efficiency, making it well suited to resource-constrained IoT environments.