We demonstrate an inertia sensitive atom interferometer optically guided inside a 22-cm-long negative curvature hollow-core photonic crystal fiber with an interferometer time of 20 ms.The result improves the previous fiber guided atom interferometer sensitivity by three orders of magnitude.The improvement arises from the realization of in-fiber -enhanced gray molasses and delta-kick cooling to cool atoms from 32 μK to below 1 μK in 4 ms.The in-fiber cooling overcomes the inevitable heating during the atom loading process and allows a shallow guiding optical potential to minimize decoherence.Our results permit bringing atoms close to source fields for sensing and could lead to compact inertial quantum sensors with a submillimeter resolution.
In conclusion, we have developed a new laser system to laser cool rubidium atoms based on frequency doubling of a 1560 nm fiber bench. The use of telecom components gives us a reliable and compact system robust compare to environmental perturbations. Our laser system should find applications for onboard cold atoms experiments like inertial captors or atomic clocks. For example, our laser could be used in matter wave interferometers in space like the project ICE supported by CNES. We should also point out that our laser system can also address potassium atoms which have a laser cooling wavelength of 767 nm.
The paper presents the results of the development of a laser-optical system for atomic interferometer based on rubidium atoms cooled to sub-Doppler temperatures. The laser-optical scheme was created to ensure the processes of cooling, pumping, and detecting atoms involved in interferometric measurements of free-fall acceleration. The system utilizes frequency doubled fiber lasers and broadband fiber electro-optical modulators. The choice of fiber lasers is driven by their high efficiency, narrow spectral line, low phase noise levels, as well as ease of operation and reliability. Laser frequency stabilization was carried out using modulation transfer spectroscopy and optical phase-locking methods. Experimental setups were described that allow the generation of multichromatic radiation and minimize spontaneous scattering by detuning from excited levels. It was noted that the design provides a full set of optical frequencies necessary for Raman spectroscopy. The amplitudes of frequency fluctuations of the cooling and pumping lasers were studied. It was shown that the implemented laser-optical system can ensure continuous operation of an atomic interferometer based on clouds of cold rubidium atoms, and an assessment of the fundamental sensitivity limit was conducted.