The ability to measure the magnetic fields around celestial bodies enables various insights into processes and phenomena deep within such bodies.The use of magnetometry in space missions dates back to the 1950s, and a number of different technologies have been used to measure these fields, ranging from fluxgates to Anisotropic Magneto Resistance (AMR) sensors.Optically-pumped magnetometers (OPMs) represent the state-of-the-art in magnetic field sensitivity. 1 Such sensors rely upon the interaction of laser light to spin polarise a warm vapour of neutral atoms.Detecting the precession of these spins, again with laser light, is a direct way to measure a magnetic field and is relatable to fundamental constants.Improvements in quantum technology within the last decade have led to the miniaturisation of these sensors.We have now reached the point where compact, lightweight, and low power devices offer greater sensitivity to magnetic fields than any other technology.In this work, we identify the following four key space application areas in which OPMs may offer significant advantages over existing technologies: Environments in which high sensitivity is needed at low magnetic fields (10s of nT), full vector read-out with high directional sensitivity and reduced SWaP compared to helium magnetometers, miniaturised and lightweight scalar magnetometers to complement vector fluxgate measurements, vector or scalar sensors that need high (40 dB) gradiometer performance.This work identifies OPM configurations for each area and makes a first estimate of size, weight and power requirements for each.By enabling improvements in magnetic field sensitivity, this represents an exciting prospect for precision magnetic field measurements while also saving mass and reducing complexity.
The ability to measure the magnetic fields around celestial bodies enables various insights into processes and phenomena deep within such bodies.The use of magnetometry in space missions dates back to the 1950s, and a number of different technologies have been used to measure these fields, ranging from fluxgates to Anisotropic Magneto Resistance (AMR) sensors.Optically-pumped magnetometers (OPMs) represent the state-of-the-art in magnetic field sensitivity. 1 Such sensors rely upon the interaction of laser light to spin polarise a warm vapour of neutral atoms.Detecting the precession of these spins, again with laser light, is a direct way to measure a magnetic field and is relatable to fundamental constants.Improvements in quantum technology within the last decade have led to the miniaturisation of these sensors.We have now reached the point where compact, lightweight, and low power devices offer greater sensitivity to magnetic fields than any other technology.In this work, we identify the following four key space application areas in which OPMs may offer significant advantages over existing technologies: Environments in which high sensitivity is needed at low magnetic fields (10s of nT), full vector read-out with high directional sensitivity and reduced SWaP compared to helium magnetometers, miniaturised and lightweight scalar magnetometers to complement vector fluxgate measurements, vector or scalar sensors that need high (40 dB) gradiometer performance.This work identifies OPM configurations for each area and makes a first estimate of size, weight and power requirements for each.By enabling improvements in magnetic field sensitivity, this represents an exciting prospect for precision magnetic field measurements while also saving mass and reducing complexity.
The optically pumped magnetometer (OPM) is a class of atomic devices that rely on the measurement of Larmor precession of an atomic spin ensemble in a magnetic field. They need the specific frequency light to complete the pumping and detection process. OPMs typically work under the Earth's magnetic field or a limited field. When operating in near-zero field, they can realize the spin-exchange relaxation-free (SERF) regime, thereby promoting a substantial increase in sensitivity. At present, OPMs have been widely used in magnetoencephalography, magnetocardiography, geomagnetic detection, and inertia measurement (comagnetometer). There are a large number of researchers engaged in the study of relevant mechanisms, devices, technologies, and applications. More importantly, supported by MEMS technology and micro/nano optics, OPMs have the potential to move toward chip-scale sensors. This special issue contains some latest developments in OPMs and related areas. We hope the reprint can provide valuable references for researchers in the related field.
As one of the fundamental properties of matter, magnetic fields have extensive application value in fields such as military, medical, and industrial sectors. High-sensitivity magnetic field measurement technology is crucial for exploring the physical world, ensuring national security, and promoting industrial development. Traditional magnetic sensors based on classical physics principles, such as fluxgate and Hall effect sensors, have become increasingly difficult to meet growing demands in terms of sensitivity, volume, and power consumption. In contrast, atomic magnetometers based on quantum effects utilize the interaction between atomic spins and external magnetic fields for measurement, offering advantages such as high sensitivity, no requirement for cryogenic cooling, and the capability for absolute measurement, making them a novel type of magnetic sensor that has received significant attention in recent years. In particular, the development of chip-scale atomic magnetometers, through technologies such as Micro-Electro-Mechanical Systems (MEMS), has significantly reduced the volume and power consumption of atomic magnetometers, enabling them to demonstrate tremendous application potential in fields such as ocean exploration, biomedical applications, and geological exploration. This paper will review the technological advances of high-sensitivity chip-scale atomic magnetometers, with a focus on discussing the latest achievements in their miniaturization and small-scale research.
Airborne magnetometry requires rigorous calibration to isolate geomagnetic signals from sensor errors and platform magnetic fields. This magnetic compensation is needed for applications like geophysical exploration and magnetic anomaly navigation. The standard approach utilizes a quantum scalar Optically Pumped Magnetometer (OPM) and a less sensitive fluxgate vector sensor for attitude information. This configuration typically results in a scalar approximation of the platform field.
Advancements in high-sensitivity Diamond Nitrogen-Vacancy (NV) vector magnetometers now enable a re-evaluation of the standard hardware configuration and full vector calibration models. We show through rigorous theoretical analysis that scalar calibration models are robust to misalignment. Vector calibration models, however, are intrinsically first-order sensitive to attitude errors, irrespective of the accuracy of the magnetic field measurements. These errors arise from inaccurate representation of the background field direction in the body frame, and can amplify small orientation errors into noticeable calibration residuals.
Using realistic sensor models and flight trajectories, we evaluate different sensor configurations for magnetic calibration and assess the use of onboard Inertial Navigation Systems (INS) as an independent attitude reference to enable stable compensation. Our results suggest that quantum vector magnetometers like NV sensors are not sufficient to solve the attitude bottleneck for airborne vector magnetic calibration. However, as a single sensor capable of providing both absolute field and directional measurements, they may offer benefits regarding sensor placement, synchronization, and scalar calibration accuracy.
The development of optically pumped magnetometers (OPMs) capable of operating in fields up to and beyond Earth's field has been accelerated in recent years by advances in the micro-fabrication of components, such as alkali-vapour cells and chip-scale lasers, and the application of spin-exchange relaxation suppression techniques, such as light-narrowing. Using these techniques, OPMs can be built for highly-accurate scalar geo-magnetometry. Sub-picotesla sensitivity can be achieved in compact packages, and commercialisation of these technologies is progressing globally. We review the underlying principles for OPM operation, including optimisation of microfabricated alkali vapour cells, and summarise the current state-of-the-art in their application.
Advances in Optical and Photonic Devices 330 integration into microfabricated packages.Such packages will be not only inexpensive and easy to batch produce they will also have lower power consumption, light weight and unimpeded mobility (Knappe et al., 2006).Sensitive magnetic field measurements, for which AMs can be used, are important owing to many existing and potential applications.Magnetometers have been in wide use, for example, in geology, military, biomagnetism, space magnetic field measurements.AMs have been used because they are both relatively sensitive compared to conventional inexpensive magnetometers, such as fluxgates, and more convenient compared to SQUIDs that require cryogenic cooling.For a long time low-T c SQUIDs had been by far the most sensitive magnetometers at low frequency.However, this has changed with the demonstration with AMs of record 0.5 fT/Hz 1/2 sensitivity (Kominis et al., 2003).High-sensitivity AMs are based on spin-polarized atomic gases or vapors, and AM research is closely related to the atomic physics subfield dedicated to the investigation of spin interactions in such media.This subfield includes the research on optical pumping and related topics such as atomic clocks, masers, hyperpolarized gases, spin-based spectroscopy, and some others.A comprehensive review of optical pumping experiments before 1972 and theory of optical pumping and various relaxation mechanisms are given by William Happer (Happer, 1972).This theory, which still stands the test of time, includes the formulation of density matrix equations, which can be directly applied to the analysis of magnetic resonances of vapors on which atomic magnetometers are based.Atomic magnetometers find many applications as other magnetometers, but they are most useful when high sensitivity and non-cryogenic operation are required.For example, AMs have been developed for submarine detection, and many other military applications are possible on similar principles.Some applications of Rb-vapor or 3 He magnetometers in geophysics and space physics were mentioned as early as in 1961 by Bloom (Bloom, 1961) who did some pioneering work on the high-sensitivity measurements of magnetic fields and theory for the operation of atomic magnetometers.Theoretical analysis of early atomic magnetometers was also done by Dehmelt (Dehmelt, 1957) and by Bell and Bloom (Bell & Bloom, 1957).Although the history of atomic magnetometers is quite fascinating and they played an important role in applications where simpler and less expensive methods did not provide sufficient sensitivity, the atomic magnetometers of the past were much less sensitive than the modern ones.Most exciting results appeared only recently with the various demonstrations of performance of high-density AMs, which we would like to focus on in this chapter. How to referenceIn order to correctly reference this scholarly work, feel free to copy and paste the following: Igor Savukov (2010).Ultra-Sensitive Optical Atomic Magnetometers and Their Applications, Advances in Optical and Photonic Devices, Ki Young Kim (Ed.),
Abstract To address the demands in healthcare and industrial settings for spatially resolved magnetic imaging, we present a modular optically pumped magnetometer (OPM) system comprising a multi-sensor array of highly sensitive quantum magnetometers. This system is designed and built to facilitate fast prototyping and testing of new measurement schemes by enabling quick reconfiguration of the self-contained laser and sensor modules as well as allowing for the construction of various array layouts with a shared light source. The modularity of this system facilitates the development of methods for managing high-density arrays for magnetic imaging. The magnetometer sensitivity and bandwidth are first characterised in both individual channel and differential gradiometer configurations before testing in a real-world magnetoencephalography environment by measuring alpha rhythms from the brain of a human participant. We demonstrate the OPM system in a first-order axial gradiometer configuration with a magnetic field gradient sensitivity of 10 fT / cm / Hz at a baseline of 4.5 cm. Single-channel operation achieved a sensitivity of 65 fT / Hz . Bandwidths exceeding 200 Hz were achieved for two independent modules. The system’s increased temporal resolution allows for the measurement of spinal cord signals, which we demonstrate by using phantom signal trials and comparing with an existing commercial sensor.