Ultra-cold quantum gases in space promise to boost the sensitivity of matter-wave interferometers. Applications of the latter extend from fundamental physics over the use in navigation to interdisciplinary applications such as geodesy, e.g. satellite gravimetry [1, 2]. Exploiting quantum gases for high-precision interferometry places high demands on their control and manipulation. We take benefit of various microgravity platforms such as the Bremen drop tower [3], the Einstein elevator in Hannover [4], sounding rockets [5,6] and the international space station [7] to advance the necessary methods. The DLR-mission MAIUS-1 demonstrated Bose-Einstein condensation and performed first interferometry experiments [4]. NASA’s Cold Atom Laboratory continues this research in orbit on the ISS [7]. In addition, atom interferometry is pursued in highly dynamic environments such as parabolic flights [8]. Starting from a rubidium Bose-Einstein condensate, recently lowest expansion energies have been achieved by us in the Bremen drop tower as required for extending atom interferometry over several seconds [9]. Extending these methods to quantum mixtures not only opens up new physics in the absence of buoyancy, but also faces challenges regarding their use for interferometry. Interferometers based on two chemical elements have been proposed for quantum tests of the equivalence principle on the ISS as well as on satellites. Currently we prepare a sounding rocket mission to investigate the simultaneous generation and manipulation of potassium and rubidium condensates [10]. Together with CAL [7], these experiments will prepare the DLR-NASA multi-user facility BECCAL for research on quantum gas mixtures and interferometry [11] as well as enhance the readiness level of methods required for STE-QUEST [12], a proposal for a satellite mission currently studied in an modified version within ESA’s VOYAGE 2050 program [13].
Ultra-cold quantum gases in space promise to boost the sensitivity of matter-wave interferometers. Applications of the latter extend from fundamental physics over the use in navigation to interdisciplinary applications such as geodesy, e.g. satellite gravimetry [1, 2]. Exploiting quantum gases for high-precision interferometry places high demands on their control and manipulation. We take benefit of various microgravity platforms such as the Bremen drop tower [3], the Einstein elevator in Hannover [4], sounding rockets [5,6] and the international space station [7] to advance the necessary methods. The DLR-mission MAIUS-1 demonstrated Bose-Einstein condensation and performed first interferometry experiments [4]. NASA’s Cold Atom Laboratory continues this research in orbit on the ISS [7]. In addition, atom interferometry is pursued in highly dynamic environments such as parabolic flights [8]. Starting from a rubidium Bose-Einstein condensate, recently lowest expansion energies have been achieved by us in the Bremen drop tower as required for extending atom interferometry over several seconds [9]. Extending these methods to quantum mixtures not only opens up new physics in the absence of buoyancy, but also faces challenges regarding their use for interferometry. Interferometers based on two chemical elements have been proposed for quantum tests of the equivalence principle on the ISS as well as on satellites. Currently we prepare a sounding rocket mission to investigate the simultaneous generation and manipulation of potassium and rubidium condensates [10]. Together with CAL [7], these experiments will prepare the DLR-NASA multi-user facility BECCAL for research on quantum gas mixtures and interferometry [11] as well as enhance the readiness level of methods required for STE-QUEST [12], a proposal for a satellite mission currently studied in an modified version within ESA’s VOYAGE 2050 program [13].
Extended free fall enables experiments with quantum gases unbiased by gravity. Apart from a 10m-fountain, we have access to various platforms comprising the Bremen drop- and gravi-tower, the Einstein Elevator, sounding rockets as well as NASA‘s cold atom laboratory (CAL) in orbit, all offering experiments with different durations and repetition rates. Atom chips turned out to successfully create Rubidium Bose-Einstein condensates on these platforms. Recently we have lowered the expansion energies of Bose-Einstein condensates to an unprecedented level corresponding to 38pK which makes them an excellent resource for interferometry. We exploit the latter to study delta-kick collimation as well to extend interferometry times in free fall. Atom chips also allow to investigate quantum mixtures in absence of bouyancy. For this purpose, we have been creating potassium 41 BECs by sympathetic cooling with rubidium. These experiments were continued to space by sounding rocket missions and the CAL. In future, the recently inaugurated Einstein elevator as well as gravitower will be important platforms to increase the experimental cycles to study quantum gas mixtures and high-precision interferometry as well as to test fundamental physics such as Einstein’s principle of equivalence and the nature of dark energy on ground in free fall.
BECCAL (Bose-Einstein-Condensate - Cold Atom Laboratory) is an experiment designed to be
housed on the International Space Station (ISS) within a bilateral collaboration between DLR and
NASA. The payload's design and operation are based on the previous quantum experiments under
microgravity, QUANTUS (drop tower), MAIUS (sounding rocket), and CAL (NASA operated ISS
experiment). The scienti�c capabilities, outlined here, cover a wide range of cold atom manipulation
and observation. Additionally, the payload strives to pave the road for future microgravity missions
housing cold atom ensembles.
Owing to the low-gravity conditions in space, space-borne laboratories enable experiments with extended free-fall times. Because Bose–Einstein condensates have an extremely low expansion energy, space-borne atom interferometers based on Bose–Einstein condensation have the potential to have much greater sensitivity to inertial forces than do similar ground-based interferometers. On 23 January 2017, as part of the sounding-rocket mission MAIUS- 1, we created Bose–Einstein condensates in space and conducted 110 experiments central to matter-wave interferometry, including laser cooling and trapping of atoms in the presence of the large accelerations experienced during launch. Here we report on experiments conducted during the six minutes of in-space flight in which we studied the phase transition from a thermal ensemble to a Bose–Einstein condensate and the collective dynamics of the resulting condensate. Our results provide insights into conducting cold-atom experiments in space, such as precision interferometry, and pave the way to miniaturizing cold-atom and photon-based quantum information concepts for satellite-based implementation. In addition, space-borne Bose–Einstein condensation opens up the possibility of quantum gas experiments in low-gravity conditions1,2.
"What are atoms doing in space anyways?" This talk will provide a brief overview of applications of quantum technologies in space ranging from precise timing and inertial measurements to fundamental physics. Quantum technologies have seen a wide field of applications in medicine, geosciences, computing and communications, in many cases bridging the gap from laboratory experiments to commercial products in the last decade. For terrestrial applications that is. But what about going to space? Quantum physics based sensors and experiments promise higher accuracy, sensitivity or better long term stability as they rely on immutable properties of atoms. When properly manipulated, these (ultra-)cold atoms are likely to outperform state of the art instruments. Experiments conducted on sounding rockets demonstrated important steps like Bose-Einstein Condensate creation during a few minutes in microgravity, enabling more advanced quantum experiments in the future. The International Space Station and the Tiangong Space Station host dedicated experiments like ultrastable clocks as well as flexible research infrastructure for fundamental research benefitting from long free-fall times. However, the deployment of such technologies on satellites is not as advanced. Satellite missions utilizing quantum sensors or performing long term experiments are subject to studies and proposals backed by a broad scientific community aiming at better understanding of climate change, interplanetary navigation or tests of general relativity. First steps towards realization of such missions are taken by ESA, NASA and various national space agencies as well as universities funded by national agencies or the EU. This talk will detect the current state of atoms in space and give an overview of active programs to deploy quantum sensors on operational satellite missions. The focus is on future applications in geosciences and related fields employing the same technology.
Recent developments in quantum technology have resulted in a new generation of sensors for measuring inertial quantities, such as acceleration and rotation. These sensors can exhibit unprecedented sensitivity and accuracy when operated in space, where the free-fall interrogation time can be extended at will and where the environment noise is minimal. European laboratories have played a leading role in this field by developing concepts and tools to operate these quantum sensors in relevant environment, such as parabolic flights, free-fall towers, or sounding rockets. With the recent achievement of Bose–Einstein condensation on the International Space Station, the challenge is now to reach a technology readiness level sufficiently high at both component and system levels to provide “off the shelf” payload for future generations of space missions in geodesy or fundamental physics. In this roadmap, we provide an extensive review on the status of all common parts, needs, and subsystems for the application of atom-based interferometers in space, in order to push for the development of generic technology components.
Quantum sensors based on the interference of cold atoms have advanced to the forefront of precision measurements in geodesy, metrology and tests of fundamental physics. The ultimate potential of these devices is realized using quantum degenerate atoms in extended free fall. This can be achieved on microgravity platforms such as drop towers, parabolic flights, ballistic rockets, satellites and space stations. The transition to mobile and robust devices that can withstand the demands of these environments comes with many challenges. Quantum sensors need to be scaled down and integrated without compromising their performance. In fact, they need to significantly outpace conventional instruments, since microgravity time is an expensive resource and limited to a few seconds at a time on the most accessible platforms. This thesis describes the construction, qualification and operation of a miniaturized ultracold atom experiment that meets these challenges. The QUANTUS-2 apparatus features a payload weight of 147 kg and a payload volume of 0.3 m^3. It generates Bose-Einstein condensates of 4×10^5 ^87Rb atoms every 1.6 seconds, a flux of ultra-cold atoms that is on par with the best lab-sized devices. Ensembles of 1×10^5 atoms can be created at a 1 Hz rate. It is currently the fastest machine of its kind and achieves the highest atom number of any atom chip setup. The apparatus continuously withstands peak accelerations of up to 45 g during microgravity campaigns at the drop tower facility in Bremen, Germany. Here, the payload has accrued 208 drops and 9 catapult launches over 24 month. The setup is the first atom optics experiment to stand up to the technical demands of catapult operation. Four condensates can be created and observed consecutively during nine seconds of free fall in a single catapult launch. In total, the experiment has been suspended in microgravity for over 17 minutes. With the record source performance, the repetition rate for microgravity experiments with ultra-cold atoms was increased by a factor of four compared to previous devices. The total atom number was increased by a factor of 40, vastly improving the signal to noise ratio for absorption images of spatially extended clouds. The ensembles can be prepared consistently over many weeks of drop tower operation. The variance of the mean center of mass velocity in two observable directions is 7.3 μm/s and 6.9 μm/s. Magnetic lensing techniques were employed to manipulate the expansion of the ensembles. First results yield a residual expansion rate in three dimensions of σ_v = 116.9 ± 13.9 μm/s, which implies a three-dimensional effective temperature of T = 47.6 ± 11.3 pK at an average condensate atom number of N = 93000. These values constitute the best collimation of any atomic ensemble and the most promising source for atom interferometry reported to date. Optimizing the current lensing sequence will reduce the expansion rate further to effective temperatures in the femtokelvin regime. The level of control demonstrated over the condensates is highly relevant for the advancement of matter-wave optics and quantum sensors. Controlling the motion and size of atomic clouds is intrinsically tied to many systematic effects in high precision measurements. QUANTUS-2 will provide a platform to explore and mitigate these limitations on unprecedented time scales of up to seven seconds of free evolution.