Quantum mechanics is concerned with measurement and we suggest that in a bound problem impulses due to momentum are the form of measurement which occurs in x space. The Lorentz invariant A= -Et+px, which is also the free particle relativistic or nonrelativistic action with v=x/t, associates energy = pp/2m with time and p with x. Creating eigenvalue equations yields id/dt exp(-iEt) = E exp(-iEt) and -id/dx exp(ipx) = p exp(ipx). P (momentum) is associated with physical impulses and with its own two dimensional probability distribution exp(ipx). E is associated with t and has its own distribution in time exp(-iEt) which implies that the same E holds for each x point without any notion of x probability associated with it. In classical physics, a momentum p exists in a tiny dx (dx→0). For exp(ipx), a p impulse may occur within hbar/p with different probabilities, so one cannot restrict the measurement of p to a tiny dx unless dx is of the order of hbar/p. Nevertheless energy exists at all x points. Given that p measurements occur through specific impulses at different x points with exp(ipx) probabilities, one must calculate an average energy using {Sum over p pp/2m a(p) exp(ipx)} / {Sum over p a(p)exp(ipx)} using the probability associated with the measurement of p in space i.e. exp(ipx). This adds to V(x) to yield a constant E at each x point. We suggest that weighted exp(ipx)s are used to calculate average energy at each x, because it is through impulse measurements that one determines p at different x values and hence the average energy. One may note that one does not calculate {Sum over p a(p)exp(ipx) p } / {Sum over p a(p)exp(ipx)}. An impulse hit is associated with a certain probability and this measurement in x yields information about the corresponding energy pp/2m. Each impulse hit also yields information about a time probability exp(-i ppt/2m), but only if the particle is knocked out of the bound system i.e. only if pp/2m is the only energy present, which is not the case for a single particle bound system.
Quantum mechanics is concerned with measurement and we suggest that in a bound problem impulses due to momentum are the form of measurement which occurs in x space. The Lorentz invariant A= -Et+px, which is also the free particle relativistic or nonrelativistic action with v=x/t, associates energy = pp/2m with time and p with x. Creating eigenvalue equations yields id/dt exp(-iEt) = E exp(-iEt) and -id/dx exp(ipx) = p exp(ipx). P (momentum) is associated with physical impulses and with its own two dimensional probability distribution exp(ipx). E is associated with t and has its own distribution in time exp(-iEt) which implies that the same E holds for each x point without any notion of x probability associated with it. In classical physics, a momentum p exists in a tiny dx (dx→0). For exp(ipx), a p impulse may occur within hbar/p with different probabilities, so one cannot restrict the measurement of p to a tiny dx unless dx is of the order of hbar/p. Nevertheless energy exists at all x points. Given that p measurements occur through specific impulses at different x points with exp(ipx) probabilities, one must calculate an average energy using {Sum over p pp/2m a(p) exp(ipx)} / {Sum over p a(p)exp(ipx)} using the probability associated with the measurement of p in space i.e. exp(ipx). This adds to V(x) to yield a constant E at each x point. We suggest that weighted exp(ipx)s are used to calculate average energy at each x, because it is through impulse measurements that one determines p at different x values and hence the average energy. One may note that one does not calculate {Sum over p a(p)exp(ipx) p } / {Sum over p a(p)exp(ipx)}. An impulse hit is associated with a certain probability and this measurement in x yields information about the corresponding energy pp/2m. Each impulse hit also yields information about a time probability exp(-i ppt/2m), but only if the particle is knocked out of the bound system i.e. only if pp/2m is the only energy present, which is not the case for a single particle bound system.
In a classical bound state, conservation of energy: p(x)p(x)/2m + V(x) = E holds for all x. Examined in a statistical sense, one may consider each constant dx to have a probability density proportional to dt(x) where v(x)=velocity =dx/ dt(x). Thus the particle is followed in time. In quantum mechanics, even for a free particle exp(ipx), there exists a wavelength hbar/p. Within this region one cannot follow the particle in time. In fact, there are two probability distributions cos(px) and the shifted sin(px). The two dimensional nature of exp(ipx) is required to describe the direction of motion. There exists a mathematical abstraction or average which holds for any x within the wavelength and yields the classical x= p/m t. Thus there is a duality, but within a wavelength one cannot follow the particle exactly using x=p/m t. Rather there is no time and one thinks of probabilities to be at one x or another. The operator -id/dx yields the abstracted or average momentum at any x and (-id/dx)(-id/dx) average pp if one divides by probability. In other words: (-id/dx) exp(ipx)/ exp(ipx) = p and (-id/dx) (-id/dx) exp(ipx) / exp(ipx) = pp. These then apply to any x point. For a bound state, exp(ipx) is replaced with W(x)= Sum over p a(p)exp(ipx). Thus p and -p are included together. From a statistical point of view this is fine because a quantum bound state is described in terms of energy conservation (time-independent Schrodinger equation). Unlike the classical case, the probabilities of p and -p differ, i.e. exp(ipx) and exp(-ipx). The sum exp(ipx)+exp(-ipx) yields cos(px) which is the resolution probability distribution. Taking -d/dx d/dx of W(x) and then dividing by W(x) yields the average kinetic energy at any x within the wavelength. In other words this is the average kinetic energy which matches the classical result for any energy level. As a result, prms(x)prms(x)/2m + V(x) = En holds for any quantum level, but prms(x) is an rms average value which bypasses wave structure. That is why the exp(ipx) for p,-p and -id/dx must be used to calculate average quantities within a wavelength. Many different p,-p combinations are needed so that at each x within a wavelength the correct average kinetic energy value appears. Now consider a high energy level and choose a fixed dx length to represent a tiny region in the system, a cutoff for which there is no further resolution. p(x) is constant within this region. If hbar/ prms(x) <= dx, the wave structure of quantum mechanics does not play a role. (Note that for an oscillator, W(x) is a set of crests and troughs with different heights and widths.) As a result, there is no need for d/dx acting on W(x) to describe average kinetic energy within dx. The average kinetic energy is prms(x)prms(x)/2m and dx is treated like a point. Only if exp(ipx) is used does -id/dx yield the proper classical result. (An alternative scenario is that d/dx acting on a function divided by the function yields the same result as acting on exp(ipx) divided by exp(ipx) e.g. -d/dx d/dx cos(px)/cos(px) = -d/dx d/dx exp(ipx) / exp(ipx). If one has the quantum kinetic energy expression -1/2m d/dx dW/dx / W ((1)) and considers one momentum, namely prms(x), and uses W(x)= cos( prms(x) x), then with prms(x) constant at x, ((1)) yields prms(x) prms(x)/ 2m. Thus d/dx has not broken down even though it does not describe motion within dx which is now a point. A problem arises, however, if one considers Wn(x)= Wn1(x)Wn2(x) as this yields an equation containing dW1/dx dW2/dx/ (W1W2). Then the above procedure yields: dW1/dx/W1 (prms(x) sin(prms(x) x) / cos(prms(x) x). This does not match the classical value. Furthermore, dW2/dx/ W2 contains +prms(x) and -prms(x) with different weights while a classical scenario is -pP(-p,x) + pP(p,x) = 0 because P(-p,x)=P(p,x) while quantum mechanically it doesn’t. We analyze this situation and conclude that d/dx breaks down/ does not apply in the classical limit because it is used to calculate average values within a wavelength only. It only “works” if the effect of the derivative(s) on a function divided by the function is the same as the effect on exp(ipx) divided by exp(ipx). If a wavelength fits within dx, there is no need to calculate values at any lower x level and d/dx is not needed. In fact, there is a single prms(x) value in dx and the average time links different dx’s so that one follows the particle (on average in the sense that one ignores structure within each x) by x(t). As a practical consequence, using -id/dx together with the wavefunction W(x) can lead to problems in the classical limit because d/dx does apply. In short, using -id/dx operating on Wn(x) divided by Wn(x) leads to issues unless it produces the same effect as acting on exp(ipx) divided by exp(ipx).
Quantum mechanics utilizes a wavefunction W(x)=Sum over p a(p)exp(ipx) (in time independent cases) with exp(ipx) being what we call a free particle complex probability. In such a case, W(x) is an OR scenario of these various probabilities. We have argued in previous notes that exp(ipx) is the probability for a p impulse hit at x, even if the center-of-mass of the particle is not at x. This means that impulse hits may occur probabilistically in space as in the 2-slit example which requires adding two probabilities as an OR case for each slit. The point then seems to be that W(x) (or even its momentum frozen form W*(x)W(x) gives a profile in space of the number of interactions (various p impulse hits) at each x. Classically, the kinetic energy (nonrelativistic) is pp/2m. In a classical bound problem this kinetic energy is considered to exist (in calculations) at the center-of-mass, but forces are also said to be rendered at this point so pp/2m, the center-of-mass and the force hit point all coincide. In quantum mechanics, a p impulse hit and the center-of-mass do not coincide. If p is said to hit at a probabilistic x, then it seems that pp/2m should also be seen to exist at this same hit point. A physical interaction point verifies in a sense the location of pp/2m in a probabilistic manner, i.e. a(p) exp(ipx)/W(x) is the probability used to calculate KEaverage and this is based on impulse hit locations. By normalizing using W(x), one removes the relative number of average hits at each x and obtains a pure energy value at x. (This may then be used in a KEave(x)+V(x)=E equation.) On average W(x) has zero points, which means that if one considers W*(x)W(x) to represent the motion-frozen-out spatial distribution of hits, then no hits are rendered at certain x points (on average). One might argue then that the particle cannot exist at x, but the center-of-mass can exist anywhere. One might next argue that there is no kinetic energy at x, but that cannot be true because 1/2m d/dx d/dx W has the same 0 points as W and the two divide. Thus, there is average kinetic energy at all bound points and this represents an average based on impulse hits (exp(ipx)). Classically, if one has many particles in a potential, one may write density(x)V(x) to find the potential energy of the particles. This implies that the particles interact with V(x), e.g. neutrinos usually do not interact. Density(x) in a classical sense means that the center-of-mass and force hit point are both at x. In quantum mechanics, exp(ipx) represents the probability for a force hit point, W(x) represents an average and W*(x)W(x) represents a motion-frozen average hit point. W*(x)W(x)V(x) seems to represent the average potential energy of the particle at x because W*(x)W(x) is linked with interaction. Even if a particle is not present, however, there is energy V(x) in space. It seems that if W*(x)W(x)=0 at some x, then there is no average particle interaction at this point, but there is still average kinetic energy Sum over p a(p)pp/2m exp(ipx) / W(x) based on the probability for average probability hits. The key idea is that one normalizes probability by dividing by W(x) in the average kinetic energy calculation. W*(x)W(x) is normalized not at x, but integrating over dx and setting this value to 1. One has relative hit at x values represented by W*(x)W(x). For exp(-ipx)exp(ipx)=1, each dx has the same average hit value (with one not being able to distinguish details in hbar/p, i.e. this is a motion frozen result. The question then becomes: Why would one write: W*(x)W(x) KEave(x)? One might argue that this term occurs if one takes the quantum mechanical equation: KEave(x) +V(x) = En and multiplies by W*(x)W(x). One may ask: Does V(x)W*(x)W(x) have physical meaning? V(x) is the potential energy at x. The average interaction probability with V(x) at x should be W(x)V(x) and not W*(x)W(x)V(x). The latter is a classical mechanical idealization. If W*(x)W(x) is 3 at x1 and 2 at x2, then it is as if the particle interacts 1.5 times more at x1 and so if V(x1)=V(x2), then this approach assumes 1.5 the interaction energy at x1. KEave(x), however, is simply free particle energy (average) at x and one does not need to take this average value and multiply it by the relative number of interactions at x. W(x) has zero points meaning that there is no interaction at such a point on average. KEave(x) on the other hand is the average energy at x based on the particle kinetic energy presence pp/2m being at the point of an impulse hit. This does not mean that an interaction is occurring with V(x) at this point in this formalism. Even a free particle has an exp(ipx) probability when it is not interacting. The sum Sum over p a(p)exp(ipx) means that all of the interactions linked with x have occurred and one is making an OR calculation. KEave(x) is free particle kinetic energy at x and V(x) is potential energy (not interaction potential energy with the particle). Multiplying by W*(x)W(x) is a classical minded approach to creating a classical equation: density(x) (KEave(x)+V(x)) = E density(x) ((1)) Here KEave(x) would represent the average kinetic energy of a single particle and density(x) would be the average number of particles at x. density(x)KE(x) has a clear meaning. W*(x)W(x) KEave(x) on the other hand is different. KEave(x) is actually the classical kinetic energy value at x and so it is not clear why one would multiply it by W*(x)W(x). W*(x)W(x) represents the probability for an impulse hit at x in a p-frozen out picture. The notion of exp(ipx) (i.e. probability for a p hit at x) is already buried within the quantum calculation of KEave(x) (which yields the classical value). In order to find the physical meaning of W*(x)W(x) multiplied by KEave(x) or V(x) it seems that one has broken dx into equally sized segments which correspond to different detection hits of the particle. This is then somehow equated with the presence of the particle per unit time in dx which is then somehow rendered as the average energy at x multiplied by the detected presence at x through a steady rate of measurement/time. Thus, multiplying by W*(x)W(x) is not multiplying by a physical density.
We try to consider free particle and single bound state quantum mechanics from the viewpoint of classical physics. We first assume that a free particle moves as x=vt. Secondly, we assume that dx and dt cannot be 0 as in Newtonian mechanics, but must be finite. This begs the question: How does one measure dx and dt? If one can measure a particle at a given x and t, then dx→0, dt→0. Thus, finite dx, dt means that a given p=constant and pp/2m=kinetic energy (nonrelativistic) interact with a force over a finite dx. In other words, one does not know where the interaction occurs within dx. As long as the free particle moves without interacting, then x=vt and there is no interest in any dx or interactions. For example, one may measure very large x and t ranges. Even if there are dx and dt effects at the start and end points, these are small compared to the large x and t values. As a result, one has a F(x,p) probability within dx, which repeats itself for the next dx (i.e. is periodic), where F is a probability for a p impulse hit at x within dx. At the same time, the particle moves with x=vt it seems within dx. In general, one might then think that F(x,p) and x=vt are decoupled. In previous notes, we have argued that one way to couple F(x,p) and x=vt is through special relativity, i.e. A = -Et+px. X and t values used would presumably satisfy x=vt, but for any x,t one has x+hbar/p and t+hbar/E as solutions yielding the same A value and so might consider dx= hbar/p and dt=hbar/E. The question we ask here is whether one may arrive at this conclusion without using special relativity. The answer seems to be that one can if one suggests that F(x,p) must contain information making it consistent with x=vt, i.e. with every x and t point having the same weight. Clearly, however, each x,t do not have the same weight within dx and dt, but are rather governed by F(x,p). This means, however, that F(x,-p) also represents a probability distribution and so if one has F(x,p)F(x,-p) there is no momentum at a given x point. In such a case, the distribution within dx must disappear and one must have a uniform distribution. This holds even if F(x,p) has the same dx value for any p. Thus, F(x,p)F(x,-p) = constant and must be periodic in x. This implies that F(x,p) = 1/F(x,-p) for constant=1. Given that F(x,p) =0 at the initial and final points of dx, then F(x,-p) = infinite at these points and that is not allowable. Thus, one is forced to use complex variables and try exp(i g(p) x). If g(p) is a function of p (i.e. not a constant), then conservation of momentum implies that exp(i g(p1) x) exp(i g(p2) x) = exp(i g(p1+p2) x), suggesting exp(ipx). What, however, if g(p) = constant? In such a case, one has issues creating an average kinetic energy: ( Sum over p a(p) exp(i constant x) pp/2m) / (Sum over p a(p) exp(i constant x) ((1)) This leads to a kinetic energy which does not depend on x and cannot be used with V(x) in a conservation of energy equation. Thus, we choose exp(ipx). Note: there is no reason to choose a(p,x) because the physics of finite dx and dt is restricted to exp(i constant x). Finally, we try to explain why the same dx=hbar/p and dt=hbar/E together with x=vt follow from special relativity.
It is sometimes stated in the literature (1) that quantum mechanics is based on conditional probabilities. If this is the case, one would expect such conditional probabilities to appear in a single particle bound state. A free quantum particle is associated with a probability to interact of exp(ipx) (linked to 2-slit interference, 1-D reflection-refraction at an n1-n2 junction etc), but the kinetic energy and momentum are pp/2m (nonrelativistic) and p at all x even though each x has a different phase according to exp(ipx). The momentum is p at x, but the probability for an impulse hit at x is not the same even though its modulus is. When different probabilities exp(ipx) add in an OR situation, this leads to a spatial pattern which no longer has a modulus of 1, i.e. translational invariance is broken. Such a pattern also occurs for a single particle bound state W(x)=Sum over p a(p)exp(ipx). W(x) can have 0 points, but the average kinetic energy -1/2m d/dx dW/dx / W is not 0 at such a point. One has, on average (a statistical calculation), no average interaction at such an x point. One might ask why this should have anything to do with average kinetic energy? If one writes a conservation law: KEave(x) + V(x) = 0, then one considers kinetic energy interacting with potential energy. If there is no interaction at some x point for a given p (not W(x) on average), then it should not be part of the conservation of energy at this point. One is only interested in kinetic energy which interacts with potential energy at each x point. Thus, a(p) exp(ipx) + a(-p) exp(-ipx) (with a(p)=a(-p)) may have a 0 point at some x and so it does not have an average interaction at such a point, i.e. pp/2m (a(p)exp(ipx) + a(-p)exp(-ipx)) = 0. As a result, in a bound state, one considers kinetic energy per p, -p multiplied by the average probability (p, -p). Different a(p)exp(ipx) + a(-p)exp(-ipx) (a(p)=a(-p)) weights in this average picture indicate the extent to which the particle interacts. This idea holds for a single p,-p pair, but one must normalize over all such pairs, leading to the idea of a conditional probability. Given that hbar/p must be “created physically” in space so to speak, one must have interaction probability which creates this physical situation even in cos(px)+ i sin(px). This leads to the idea of interaction probability being 0, positive, but <1, or even negative and it is the interaction which allows one to consider conservation of energy with a potential V(x) in the first place. As a result, one cannot include a full pp/2m if there is negative, 0 or only particle interaction. Thus, pp/2m is multiplied by 2 a(p)cos(px) /W(x) for a(p)=a(-p).
In the literature (1), the Schrodinger equation: {p1p1/2m + p2p2/2m + V(x1-x2)} W(x1,x2,t) = id/dt partial W(x1,x2,t) may be transformed using P=p1+p2 and (p=m1p2-m2p1)/M and x=x1=x2 where M=m1+m2 ((1)). This leads to a bound Schrodinger equation in x and a “center of mass” equation” in P i..e Hcm =PP/2M which depends on m1 and m2, but not binding energy. . In a previous note, we argued that a free particle’s classical action A (relativistic or nonrelativistic) may be obtained by setting v=x/t and treating x and t as independent (2). This leads to dA/dx partial=p and dA/dt partial = -E. One may write eigenvalue equations: -id/dx partial exp(iA) = pexp(iA) and id/dt partial exp(iA) = E exp(iA). A solution is A=-Et+px with E,t,p and x independent. -Et+px is a Lorentz invariant and this form is used in both relativistic and nonrelativistic quantum mechanics (although E and p have different values). We argue that a free particle rest mass mo may actually involve internal quantum physics, yet the “system” is replaced with a parameter mo and exp(-iEt+px) used to describe it. One may try to apply this approach to a bound system, but exp(-iEt+px) is a statistical probability like object. Thus one needs a statistical theory. We have suggested using an ensemble of exp(-iEt+px) with E=En for all p to indicate a resonance. Then: { Sum over p pp/2m a(p)exp(ipx) } / {Sum over p a(p)exp(ipx) } + V(x) = En ((2)) This is the Schrodinger bound equation. We argue that W=Sum over p a(p)exp(ipx) should be real and this implies that Sum over p a(p) p exp(ipx) = 0 i.e. average momentum for this type of average is 0. As a result, one may create a 4-vector using { 0, mcc + En} and use the Lorentz boost approach to find the momentum and energy in a moving frame. One may then take the nonrelativistic limit to find kinetic energy i.e. the full center of mass kinetic energy. We argue that this is equivalent to considering exp(-iEt+ipx) for the overall bound system which is now translating in space. We argue that ((2)) is a different approach to ((1)) in that binding energy, which may be significant with respect to mcc, should be part of the overall energy of the translating bound system which is called the “center of mass” system in the literature.
In a series of notes (1), we argued that the time-independent Schrodinger equation may be considered as a statistical conservation of average energy equation. We further argued that V(x)=Sum over k Vk exp(ikx) delivers stochastic potential hits which create a momentum distribution W(x)= Sum over p a(p) exp(ipx) at each x. The form exp(ipx) describes a free particle and a statistical distribution is made of such free particles. The form exp(ipx) has a modulus of 1 indicating that P(x)=constant. d/dx exp(ipx) = ip suggesting the change in conditional probability with space is related to classical momentum. Given a momentum distribution, each p at x occurs at a different time. Thus, one does not follow a classical particle in time x(t), nevertheless an average energy conservation equation applies. Taking the time-independent Schrodinger equation E W = -1/2m d/dx d/dx W + V(x) W and writing EW = i d/dt exp(-iEt), one obtains a time-dependent equation. We argue that if the time-independent case represents a classical conservation of average energy, the time-dependent equation should be linked to Newton’s equation of motion. This immediately leads to a problem because we argue one does not want x(t) for a statistical system. As a result, x in the time-dependent Schrodinger equation, which represented spatial position before, now represents a spatial variable that is independent of time. We consider the oscillator case and note that an amplitude is such a candidate where x(t)=XA(t). Thus, the time-dependent Schrodinger equation ultimately becomes an equation in A(t) with the amplitude cancelling, at least in the free particle and oscillator case. From such a consideration, one may work “backwards” and find a function for which the time-dependent Schrodinger equation (equating powers of X) becomes Newton’s second law. From this, one may show that exp(i Action) where Action = Integral dt1 (0,t) L where L is the classical Lagrangian is this solution with d/dX applying to X which is an amplitude, not x(t).