The research on superconducting quantum circuits has expanded greatly, from applications of magnetic field sensors using superconducting quantum interference devices to the development of quantum computers based on superconducting quantum bits (qubits).Superconducting quantum circuits have been progressing rapidly, and as examples of applying these circuits to quantum sensing, this article introduces electron spin resonance spectrometers having high sensitivity and high spatial resolution and an ultrasmall high-sensitivity thermometer operating at extremely low temperatures.As an application to quantum computing, this article also introduces a bosonic qubit that executes quantum error correction using the many degrees of freedom within a superconducting resonator.
The research on superconducting quantum circuits has expanded greatly, from applications of magnetic field sensors using superconducting quantum interference devices to the development of quantum computers based on superconducting quantum bits (qubits).Superconducting quantum circuits have been progressing rapidly, and as examples of applying these circuits to quantum sensing, this article introduces electron spin resonance spectrometers having high sensitivity and high spatial resolution and an ultrasmall high-sensitivity thermometer operating at extremely low temperatures.As an application to quantum computing, this article also introduces a bosonic qubit that executes quantum error correction using the many degrees of freedom within a superconducting resonator.
Superconducting circuits are promising components for future quantum information technologies such as quantum computing, quantum simulation, and quantum sensing. Superconducting quantum interference devices (SQUIDs) and superconducting flux qubits can be used as a sensitive magnetic field sensor to detect local electron spin resonance (ESR). These types of sensor are characterized by good sensitivity and high spatial resolution for electron spins. In fact, we have achieved a sensitivity of 20 spins/Hz with a sensing volume of 6 fl combining a flux qubit and qubit readout using a Josephson bifurcation amplifier. As a demonstration, we measured the ESR spectrum of erbium electron spins in a Y2SiO5 crystal and nitrogen vacancy centers in diamond. In both cases, we obtained reasonable electron spin parameters by fitting a simulation to the spectrum. In this way, we proved superconducting circuits to be promising magnetic field sensors for evaluating the properties of solid materials.
Sensing and metrology play an important role in fundamental science and applications, by fulfilling the ever-present need for more precise data sets, and by allowing to make more reliable conclusions on the validity of theoretical models. Sensors are ubiquitous, they are used in applications across a diverse range of fields including gravity imaging, geology, navigation, security, timekeeping, spectroscopy, chemistry, magnetometry, healthcare, and medicine. Current progress in quantum technologies inevitably triggers the exploration of quantum systems to be used as sensors with new and improved capabilities. This perspective initially provides a brief review of existing and tested quantum sensing systems, before discussing future possible directions of superconducting quantum circuits use for sensing and metrology: superconducting sensors including many entangled qubits and schemes employing Quantum Error Correction. The perspective also lists future research directions that could be of great value beyond quantum sensing, e.g. for applications in quantum computation and simulation.
Information processing technology based on the basic principle of quantum mechanics shows great potential applications in computing, sensing and other fields, and is far superior to classical technology. With the advance of experimental technology, quantum control technology develops rapidly. Compared with other quantum information processing platforms, the superconducting system based on solid materials has the advantages of accurate quantum controllability, excellent quantum coherence and the potential for large-scale integration. Therefore, superconducting quantum system is one of the most promising platforms for quantum information processing. The existing superconducting circuits, which can integrate about one hundred qubits, have already demonstrated the advantages of quantum systems, but further development is limited by system noise. In order to break through this bottleneck, quantum error correction technology, which is developed from the classical error correction technology, has attracted extensive attention. Here, we mainly summarize the research progress of quantum error correction in superconducting quantum systems including the basic principles of superconducting quantum systems, the quantum error correction codes, the related control techniques and the recent applications. At the end of the article, we summarize seven key problems in this field.
SQUIDs (superconducting quantum interference devices) have been in use for more than half a century and constitute one of the first macroscopic quantum devices. SQUIDs operating at millikelvin temperatures can act as qubits for quantum computers and the recent reports of more than 50 qubit circuits indicate how far the technology has developed. In this talk, the author will describe two other applications of SQUIDs as quantum detectors, focusing on single spin and single photon energy resolving detection. Most superconducting devices rely on tri-layer Josephson tunnel junctions which are not easily scalable to the nanoscale. We have developed a Josephson junction fabrication method, based on electron beam lithography or focused ion beam milling of a single thin film of superconductor (Nb generally) which can provide sizes down to 50 nm. These devices are particularly relevant for two main applications in quantum technology and metrology. First, by shrinking the size of the SQUID loop and the junctions to around 200 nm, the sensitivity of the SQUID for magnetization measurements is improved to the level where a single electron spin flip may be detected. This is possible at the relatively elevated temperature of 4K.
We are working with Surrey University to implant single magnetic ions within the SQUID loop to provide a platform to test this combination as the basis for a new form of qubit operating at higher temperatures than the conventional Transmon superconducting devices. A second SQUID based detector which we are developing is an inductive transition edge sensor device (ISTED) for energy resolving measurements of single photons. This is based on the development of conventional transition edge sensors where we detect the change of the penetration depth of a small thin film of superconductor when it absorbs a photon. In this way, a major source of noise in conventional TES may be avoided since the absorber remains in the superconducting state at all times. In this way we have demonstrated single photon detection at 633 nm with 0.1eV resolution at operating temperature of 7.5K.
Quantum information is vulnerable to environmental noise and experimental imperfections, hindering the reliability of practical quantum information processors. Therefore, quantum error correction (QEC) that can protect quantum information against noise is vital for universal and scalable quantum computation. Among many different experimental platforms, superconducting quantum circuits and bosonic encodings in superconducting microwave modes are appealing for their unprecedented potential in QEC. During the last few years, bosonic QEC is demonstrated to reach the break-even point, i.e. the lifetime of a logical qubit is enhanced to exceed that of any individual components composing the experimental system. Beyond that, universal gate sets and fault-tolerant operations on the bosonic codes are also realized, pushing quantum information processing towards the QEC era. In this article, we review the recent progress of the bosonic codes, including the Gottesman-Kitaev-Preskill codes, cat codes, and binomial codes, and discuss the opportunities of bosonic codes in various quantum applications, ranging from fault-tolerant quantum computation to quantum metrology. We also summarize the challenges associated with the bosonic codes and provide an outlook for the potential research directions in the long terms.
Quantum computing is a novel paradigm for information processing that promises computational speedup for certain computational tasks while not being driven by Moore's law. Superconducting circuits based on Josephson junctions are one of the leading approaches for implementing the quantum bits, or qubits, in a quantum processor. Most superconducting qubit architectures involve circuit quantum electrodynamics, where the qubits are analogous to artificial atoms that are coupled to superconducting linear resonant cavities. This scheme allows for the readout of individual qubits, the manipulation of single-qubit states, and the generation of entanglement between qubits. The performance of current state-of-the-art systems is limited by decoherence of the qubits and associated gate errors. Nonetheless, experiments have been performed that already demonstrate a significant computational speedup compared to classical processing. Future implementations of fault-tolerant quantum computers will require the development of quantum error correction. Initial tests of elements of error correction in superconducting qubit arrays are underway.