There are two conventional methods to establish an entanglement connection in a Quantum Data Networks (QDN). One is to create single-hop entanglement links first and then connect them with quantum swapping, and the other is forwarding one of the entangled photons from one end to the other via all-optical switching at intermediate nodes to directly establish an entanglement connection. The two methods both have pros and cons. Respectively, the former method has a higher success probability of constructing entanglement link, but it would consume more quantum resources. The latter method, however, has a lower success probability to deliver a photon across multiple quantum links with fewer quantum resources. Accordingly, we are expecting to establish significantly more entanglement connections with limited quantum resources by first creating entanglement segments, each spanning multiple quantum link, using all-optical switching, and then connecting them with quantum swapping. In this paper, we design SEE, a Segmented Entanglement Establishment approach that seamlessly integrates quantum swapping and all-optical switching to maximize quantum network throughput. SEE first creates entanglement segments over one or multiple quantum links with all-optical switching, and then connect them with quantum swapping. Accordingly, SEE can theoretically outperform conventional entanglement link-based approaches. Large scale simulations show that SEE can achieve up to 100.00% larger throughput compared with the state-of-the-art entanglement link-based approaches, e.g., Redundant Entanglement Provisioning and Selection (REPS).
There are two conventional methods to establish an entanglement connection in a Quantum Data Networks (QDN). One is to create single-hop entanglement links first and then connect them with quantum swapping, and the other is forwarding one of the entangled photons from one end to the other via all-optical switching at intermediate nodes to directly establish an entanglement connection. The two methods both have pros and cons. Respectively, the former method has a higher success probability of constructing entanglement link, but it would consume more quantum resources. The latter method, however, has a lower success probability to deliver a photon across multiple quantum links with fewer quantum resources. Accordingly, we are expecting to establish significantly more entanglement connections with limited quantum resources by first creating entanglement segments, each spanning multiple quantum link, using all-optical switching, and then connecting them with quantum swapping. In this paper, we design SEE, a Segmented Entanglement Establishment approach that seamlessly integrates quantum swapping and all-optical switching to maximize quantum network throughput. SEE first creates entanglement segments over one or multiple quantum links with all-optical switching, and then connect them with quantum swapping. Accordingly, SEE can theoretically outperform conventional entanglement link-based approaches. Large scale simulations show that SEE can achieve up to 100.00% larger throughput compared with the state-of-the-art entanglement link-based approaches, e.g., Redundant Entanglement Provisioning and Selection (REPS).
There are two conventional methods to establish an entanglement connection in a Quantum Data Network (QDN). One is to create single-hop entanglement links first and then connect them with quantum swapping, and the other is for-warding one of the entangled photons from one end to the other via all-optical switching at intermediate nodes to directly establish an entanglement connection. Since a photon is easy to be lost during a long distance transmission, all existing works are adopting the former method. However, in a room size network, the success probability of delivering a photon across multiple links via all-optical switching is not that low. In addition, with an all-optical switching technique, we can save quantum memory at the intermediate nodes. Accordingly, we are expecting to establish significantly more entanglement connections with limited quantum resources by first creating entanglement segments, each spanning multiple quantum links, using all-optical switching, and then connecting them with quantum swapping.In this paper, we design SEE, a Segmented Entanglement Establishment approach that seamlessly integrates quantum swapping and all-optical switching to maximize quantum network throughput. SEE first creates entanglement segments over one or multiple quantum links with all-optical switching, and then connect them with quantum swapping. It is clear that an entanglement link is only a special entanglement segment. Accordingly, SEE can theoretically outperform conventional entanglement link based approaches. Large scale simulations show that SEE can achieve up to 100.00% larger throughput compared with the state-of-the-art entanglement link based approach, i.e., REPS.
Quantum communication using qubits based on the principle of entangled photons is a promising solution to improve network security. However, it is difficult to successfully create an entanglement link or connection between two nodes, especially when they are far apart from each other. In addition, only one qubit can be exchanged over an established entanglement connection, resulting in a low throughput.In this paper, we propose Redundant Entanglement Pro-visioning and Selection (REPS) to maximize the throughput for multiple source-destination (SD) pairs in a circuit-switched, multi-hop quantum network. REPS has two distinct features: (i). It provisions backup resources for extra entanglement links between adjacent nodes for failure-tolerance; and (ii). It provides flexibility in selecting successfully created entanglement links to establish entanglement connections for the SD pairs to achieve network-wide optimization. Extensive analysis and simulations show that REPS can achieve optimal routing with a high probability, and improves the throughput by up to 68.35% over the highest-performing algorithms in existence. In addition, it also improves the fairness among the SD pairs in the networks.
With the advent of the construction and deployment of entanglement-based quantum networks, the efficient use of network resources will become a critical challenge for the scalable operation of such a system. Recently, architectures that incorporate memoryless optical switches have gained attention for forwarding entangled photons. By leveraging these architectures, costly resources such as high efficiency Bell State Analyzers (BSAs) can be shared across the network. Nevertheless, the introduction of switching substantially complicates the process of multiplexing and resource allocation compared to an individual link. In this work, we propose a switching protocol for unbuffered, multidrop quantum networks in a photonic synchronization domain that establishes a link between two end nodes using a shared BSA in the switched network. To achieve this, two end nodes cooperatively select the target BSA node with the lowest path cost and independently reserve each path within the network. Bi-path reservations are performed to allocate resources in a distributed manner. The proposed protocol is evaluated through simulation on Q-Fly network topologies under varying traffic conditions. The results demonstrate high link establishment success with stable performance even under increased network load. These capabilities which are driven by our proposed protocol are an essential way to realize large-scale, managed, and automated quantum networks.
Entanglement distribution between distant quantum nodes plays an essential role in realizing quantum networks’ capabilities. In addition to path selection, remote entanglement distribution involves two pivotal quantum operations, i.e., entanglement generation and entanglement swapping. The existing studies mainly adopt two methods, i.e., Tell-and-Generation (TAG) and Tell-and-Swapping (TAS), to manage these two quantum operations on a selected path. However, both methods fatally introduce redundant stop-and-wait processes, which are detrimental to the performance of remote entanglement distribution in terms of latency and fidelity. To achieve low-latency and high-fidelity entanglement distribution between far-off quantum nodes, we propose a segment-based method consisting of an entanglement generation algorithm and a segment design to diminish the unnecessary stop-and-wait processes. The entanglement generation algorithm adopts a concurrent design to establish entanglement links using the one-demand generation model, thus effectively reducing waiting time compared to hop-by-hop and parallel designs. The segment design is proposed to split a long-distance path into multiple short-haul segments with the similar ability to swap entanglement, and these segments build multi-hop entanglement connections in parallel. Extensive simulations show that the segment-based method significantly outperforms the existing methods, including TAG and TAS, in entanglement distribution latency and effectively mitigates fidelity attenuation.
Efficient entanglement routing in Quantum Data Networks (QDNs) is essential in order to concurrently establish as many Entanglement Connections (ECs) as possible, which in turn maximizes the network throughput. In this work, we consider a new class of QDNs with wavelength division multiplexed (WDM) quantum links where each quantum repeater will perform entanglement swapping by measuring two photonic qubits coming from some entangled photon sources directly on the same wavelength. To address unique challenges in achieving a high network throughput in such QDNs, we propose QuRWA to jointly optimize the entanglement routing and wavelength assignment. To this end, we introduce a key concept named Co-Path to improve fault-tolerance: all ELs in a Co-Path set will be assigned the same wavelength and this may serve as backup for some other ELs in the same Co-Path when establishing ECs. We design efficient algorithms to optimize the Co-Path selection and wavelength assignment to maximize resource utilization and fault tolerance. Extensive simulations demonstrate that compared with the methods without introducing Co-Path, QuRWA improves the network throughput by up to 122%.
Quantum Data Networks (QDNs) typically leverage teleportation to reliably send data quantum bits (called qubits) to their destinations. To teleport a data qubit from Alice to Bob, one entanglement connection between Alice and Bob needs to be established. Accordingly, we have to establish as many entanglement connections as possible with limited quantum resources in order to maximize the network throughput. Conventional methods assume a known traffic matrix and calculate the paths to establish entanglement connections in one batch using a centralized algorithm. However, these methods are not scalable in large scale QDNs since it is time consuming to optimize the entanglement paths for a batch of requests, which may result in a long time slot duration and significantly reduce the network throughput. To address this issue, we propose an Online Entanglement Routing (OER) scheme which determines the entanglement paths for each request when it arrives. In addition, OER pursues work conservation and fairness among all requests in the QDNs. Through extensive simulations, we demonstrate that OER not only outperforms two representative heuristics by up to 61.27% and 52.79%, respectively, in terms of average request completion time, but also achieves a better fairness performance than these two counterparts.