Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optical Fiber Communication Conference

Photon-pair generation from two silicon micro-rings using the recycled optical power from a contra-directional pump-reject filter

Abdelrahman E. Afifi, Andreas Theo Pfenning, Sudip Shekhar, Lukas Chrostowski, Jeff F. Young

Published Jan 1, 2023• 1 citation
Publisher

Abstract

Two micro-ring resonators are integrated with two contra-directional pump-reject filters in a pump-reuse configuration showing a 55% increase in the coincidence counts from both sources compared to a single source at 1mW input pump power.
DOI
10.1364/ofc.2023.th2a.36

Related papers

Photon-pair generation from two silicon micro-rings using the recycled optical power from a contra-directional pump-reject filter

Abdelrahman E. Afifi, Andreas Theo Pfenning, Sudip Shekhar +2 more

Two micro-ring resonators are integrated with two contra-directional pump- reject filters in a pump-reuse configuration showing a 55% increase in the coincidence counts from both sources compared to a single source at 1mW input pump power.

Optical Fiber Communication Conference•Mar 1, 2023•0 citations

Integrated Contra-directional Pump-reject Filters for Photon-pair Sources in Silicon

Abdelrahman E. Afifi, Sudip Shekhar, Jeff F. Young +1 more

We demonstrate a micro-ring resonator photon-pair source integrated with a pump-reject filter using cascaded contra-directional couplers from their through-port, achieving coincidence-to-accidental ratio (CAR) of 125 at an on-chip pair generation rate of 0.4MHz.

Conference on Lasers and Electro-Optics•Jan 1, 2021•1 citation

Contra-Directional Couplers as Pump Rejection and Recycling Filters for On-Chip Photon-Pair Sources

Abdelrahman E. Afifi, Lukas Chrostowski, Mustafa Hammood +3 more

Contra-directional couplers are proposed as optical pump reject filters with the potential to achieve over 100 dB extinction ratios for on chip photon-pair sources. A scheme for these filters to enable reusing the pump laser for multiple microring resonator, photon-pair sources is presented.

IEEE International Conference on Group IV Photonics (GFP)•Aug 1, 2019•6 citations

Development of a High Performance Resonant Photon-Pair Source in Silicon

Jeffrey A. Steidle

One of the key building blocks of quantum photonic systems is a source of indistinguishable photons. Silicon ring resonators can be used as photon pair sources by taking advantage of silicon's large third order nonlinearity with a process known as spontaneous four wave mixing. These sources are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50% loss. By slightly decoupling the input waveguide from the ring, the desired photons generated in the ring can be directed to the drop port. Thus, the ratio between the coincidences from the drop port and the total number of coincidences from all ports (coincidence efficiency) can be significantly increased, with the trade-off being that the pump is less efficiently coupled into the ring. This asymmetric coupling scheme was used to demonstrate a dual-bus microring source with a coincidence efficiency of ~96%. Unfortunately, the penalty to pump power was quite large, with a required ~10x increase in the pump power to maintain the same pair generation rate.\nTo further improve upon this result, a microring source was designed with multipoint evanescent couplers to induce a strong spectral dependence in the coupling coefficients. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a ring-based photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Asymmetric coupling was also used in this configuration but in a different way than in the previous source. In this case, the input side of the ring was configured to be critically coupled for maximal resonance enhancement while the output side was configured to be over coupled to minimize photon-pair loss within the ring. This device design was used to demonstrate a photon-pair source with coincidence efficiencies of 0.9981+-6.425x10^-4 and 0.9979+-1.665x10^-3 for degenerate and non-degenerate pump configuration respectively.\nIn addition to the source development, work was done to move some of the pump rejection filtering onto the photonic chip. While the fabricated device only exhibited an extinction of 50 dB, the root cause of the limited extinction was explored and a new filter design was proposed to overcome these limitations. With the combination of the microring source with its greatly improved efficiency and the movement toward reducing the required off-chip filtering, this work represents a significant advancement in the scalability of integrated quantum photonic systems which can enable high performance quantum computing and communication systems.

•Jan 1, 2019•0 citations

Path to increasing the coincidence efficiency of integrated resonant photon sources

C. C. Tison, J. A. Steidle, M. L. Fanto +5 more

Silicon ring resonators are used as photon pair sources by taking advantage of silicon's large third order nonlinearity with a process known as spontaneous four wave mixing. These sources are capable of producing pairs of indistinguishable photons but typically suffer from an effective $50\%$ loss. By slightly decoupling the input waveguide from the ring, the drop port coincidence ratio can be significantly increased with the trade-off being that the pump is less efficiently coupled into the ring. Ring resonators with this design have been demonstrated having coincidence ratios of $\sim 96\%$ but requiring a factor of $\sim 10$ increase in the pump power. Through the modification of the coupling design that relies on additional spectral dependence, it is possible to achieve similar coincidence ratios without the increased pumping requirement. This can be achieved by coupling the input waveguide to the ring multiple times, thus creating a Mach-Zehnder interferometer. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Recently, this device has been realized with preliminary results exhibiting the desired spectral dependence and with a coincidence ratio as high as $\sim 97\%$ while allowing the pump to be nearly critically coupled to the ring. The demonstrated near unity coincidence ratio infers a near maximal heralding efficiency from the fabricated device. This device has the potential to greatly improve the scalability and performance of quantum computing and communication systems.

arXiv:1703.08368•Optics Express•Dec 20, 2017•45 citations

Contra-directional pump reject filters integrated with a micro-ring resonator photon-pair source in silicon

Abdelrahman E. Afifi, Mustafa Hammood, Nicolas A. F. Jaeger +3 more

High coincidence-to-accidental ratio (CAR) is crucial for photon-pair sources (PPSs) integrated with pump reject filters (PRFs) in silicon, but CAR values currently reported for integrated PPS/PRF chips still fall short of those achieved using stand-alone sources with external PRFs. Here we report measured and modelled CAR values for a micro-ring resonator PPS integrated with a PRF consisting of a three-stage, cascaded (via their through ports), contra-directional coupler (CDC) that compare favorably even with some stand-alone sources. CDC-based PRFs provide the benefits of compact area and wide reject bands without a need for tuning, in comparison to prior-art implementations.

Optics Express•Jul 12, 2021•23 citations
One of the key building blocks of quantum photonic systems is a source of indistinguishable photons. Silicon ring resonators can be used as photon pair sources by taking advantage of silicon's large third order nonlinearity with a process known as spontaneous four wave mixing. These sources are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50% loss. By slightly decoupling the input waveguide from the ring, the desired photons generated in the ring can be directed to the drop port. Thus, the ratio between the coincidences from the drop port and the total number of coincidences from all ports (coincidence efficiency) can be significantly increased, with the trade-off being that the pump is less efficiently coupled into the ring. This asymmetric coupling scheme was used to demonstrate a dual-bus microring source with a coincidence efficiency of ~96%. Unfortunately, the penalty to pump power was quite large, with a required ~10x increase in the pump power to maintain the same pair generation rate.\nTo further improve upon this result, a microring source was designed with multipoint evanescent couplers to induce a strong spectral dependence in the coupling coefficients. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a ring-based photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Asymmetric coupling was also used in this configuration but in a different way than in the previous source. In this case, the input side of the ring was configured to be critically coupled for maximal resonance enhancement while the output side was configured to be over coupled to minimize photon-pair loss within the ring. This device design was used to demonstrate a photon-pair source with coincidence efficiencies of 0.9981+-6.425x10^-4 and 0.9979+-1.665x10^-3 for degenerate and non-degenerate pump configuration respectively.\nIn addition to the source development, work was done to move some of the pump rejection filtering onto the photonic chip. While the fabricated device only exhibited an extinction of 50 dB, the root cause of the limited extinction was explored and a new filter design was proposed to overcome these limitations. With the combination of the microring source with its greatly improved efficiency and the movement toward reducing the required off-chip filtering, this work represents a significant advancement in the scalability of integrated quantum photonic systems which can enable high performance quantum computing and communication systems.
Silicon ring resonators are used as photon pair sources by taking advantage of silicon's large third order nonlinearity with a process known as spontaneous four wave mixing. These sources are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50%50\%50% loss. By slightly decoupling the input waveguide from the ring, the drop port coincidence ratio can be significantly increased with the trade-off being that the pump is less efficiently coupled into the ring. Ring resonators with this design have been demonstrated having coincidence ratios of ∼96%\sim 96\%∼96% but requiring a factor of ∼10\sim 10∼10 increase in the pump power. Through the modification of the coupling design that relies on additional spectral dependence, it is possible to achieve similar coincidence ratios without the increased pumping requirement. This can be achieved by coupling the input waveguide to the ring multiple times, thus creating a Mach-Zehnder interferometer. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Recently, this device has been realized with preliminary results exhibiting the desired spectral dependence and with a coincidence ratio as high as ∼97%\sim 97\%∼97% while allowing the pump to be nearly critically coupled to the ring. The demonstrated near unity coincidence ratio infers a near maximal heralding efficiency from the fabricated device. This device has the potential to greatly improve the scalability and performance of quantum computing and communication systems.
High coincidence-to-accidental ratio (CAR) is crucial for photon-pair sources (PPSs) integrated with pump reject filters (PRFs) in silicon, but CAR values currently reported for integrated PPS/PRF chips still fall short of those achieved using stand-alone sources with external PRFs. Here we report measured and modelled CAR values for a micro-ring resonator PPS integrated with a PRF consisting of a three-stage, cascaded (via their through ports), contra-directional coupler (CDC) that compare favorably even with some stand-alone sources. CDC-based PRFs provide the benefits of compact area and wide reject bands without a need for tuning, in comparison to prior-art implementations.