Silicon carbide is an emerging platform for quantum technologies that provides wafer scale and low-cost industrial fabrication. The material also hosts high-quality defects with long coherence times that can be used for quantum computation and sensing applications. Using an ensemble of nitrogen-vacancy centers and an XY8-2 correlation spectroscopy approach, we demonstrate a room-temperature quantum sensing of an artificial AC field centered at ~900 kHz with a spectral resolution of 10 kHz. Implementing the synchronized readout technique, we further extend the frequency resolution of our sensor to 0.01 kHz. These results pave the first steps for silicon carbide quantum sensors toward low-cost nuclear magnetic resonance spectrometers with a wide range of practical applications in medical, chemical, and biological analysis.
Silicon carbide is an emerging platform for quantum technologies that provides wafer scale and low-cost industrial fabrication. The material also hosts high-quality defects with long coherence times that can be used for quantum computation and sensing applications. Using an ensemble of nitrogen-vacancy centers and an XY8-2 correlation spectroscopy approach, we demonstrate a room-temperature quantum sensing of an artificial AC field centered at ~900 kHz with a spectral resolution of 10 kHz. Implementing the synchronized readout technique, we further extend the frequency resolution of our sensor to 0.01 kHz. These results pave the first steps for silicon carbide quantum sensors toward low-cost nuclear magnetic resonance spectrometers with a wide range of practical applications in medical, chemical, and biological analysis.
Nuclear magnetic resonance (NMR) spectroscopy is widely used in fields ranging from chemistry and materials science to neuroscience. Nanoscale NMR spectroscopy using nitrogen-vacancy (NV) centers in diamond has emerged as a promising platform due to an unprecedented sensitivity down to the single spin level. At the nanoscale, high nuclear spin polarization through spin fluctuations (statistical polarization) far outweighs thermal polarization. However, until now efficient NMR detection using coherent averaging techniques could not be applied to the detection of statistical polarization, leading to long measurement times. Here we present two protocols to enable coherent averaging of stochastic oscillatory signals through rectification. We demonstrate these protocols on an artificial radio frequency signal detected with a single NV center at 2.7 T. The signal-to-noise scaling with number of measurements N increases from N^{0.5} to N^{1}, improving the measurement time significantly. The relevance of rectification for the detection of statistically polarized nuclear spins using ensembles of NV centers is outlined, paving the way for efficient nanoscale NMR spectroscopy.
The nanoscale charge environment critically influences the performance of semiconductor devices, yet traditional characterization techniques usually lack the spatial resolution to resolve nanoscale charge heterogeneity and identify microscopic noise sources. Here, we address this critical gap by utilizing individual PL5 color centers in commercial silicon carbide as room-temperature, broadband (near-DC to GHz) quantum spectrometers. We report the first real-time, nanoscale observation of single-charge tunneling dynamics at room temperature in 4H-SiC by monitoring the random telegraph noise using optically detected magnetic resonance (ODMR). This capability enables an electrical noise imaging technique that shows distinct noise variations on different wafers. Employing dynamical decoupling and T1 relaxation spectroscopy, we observe correlations of noise spectral density across frequency bands and obtain the nanoscale electron paramagnetic resonance (EPR) fingerprint of spin defects in SiC. Ultimately, through surface chemical engineering, we identify the native oxide layer as the main source of resolved electromagnetic fluctuations. This work establishes a versatile atomic-scale metrology platform bridging quantum sensing and semiconductor engineering, offering critical insights for optimizing third-generation semiconductor interfaces and advancing solid-state quantum technologies.
Nuclear magnetic resonance (NMR) spectroscopy is widely used in fields ranging from chemistry, materials science to neuroscience. Nanoscale NMR spectroscopy using Nitrogen-vacancy (NV) centers in diamond has emerged as a promising platform due to an unprecedented sensitivity down to the single spin level. At the nanoscale, high nuclear spin polarization through spin fluctuations (statistical polarization) far outweighs thermal polarization. However, until now efficient NMR detection using coherent averaging techniques could not be applied to the detection of statistical polarization, leading to long measurement times. Here we present two protocols to enable coherent averaging of statistically oscillating signals through rectification. We demonstrate these protocols on an artificial radiofrequency signal detected with a single NV center at 2.7 T. The signal-to-noise scaling with number of measurements 𝑁 increases from 𝑁0.5 to 𝑁1, improving the measurement time significantly. The relevance of rectification for the detection of statistically polarized nuclear spins using ensembles of NV centers is outlined, paving the way for efficient nanoscale NMR spectroscopy.
This work presents an industrially scalable, power-efficient and high-performance quantum magnetometer chip based on proprietary 4H-silicon carbide (SiC) technology, leveraging wafer-scale fabrication techniques to optimize V2 silicon vacancy color centers for highly reproducible, industry-grade fabrication with precise control of depth and density. The integration of these color center ensembles into a planar silicon carbide waveguide enables efficient excitation of a large ensemble and simplifies fluorescence extraction compared to standard confocal methods. We report continuous-wave (CW) optically detected magnetic resonance measurements, complemented by Rabi, Ramsey, and Hahn-echo sequences, which demonstrate coherent capabilities of the large embedded ensemble of V2 centers. Based on the data, our device exhibits sensor shot-noise limited sensitivities 2-3 orders of magnitude lower compared to more complex confocal techniques. Collectively, these advancements simplify the quantum sensor architecture, enhance sensitivity, and streamline optical excitation and collection, thereby paving the way for the development of next-generation SiC-quantum sensing technologies.
In modern-day quantum metrology, quantum sensors are widely employed to detect weak magnetic fields or nanoscale signals. Quantum devices, exploiting quantum coherence, are inevitably connected to physical constants and can achieve accuracy, repeatability, and precision approaching fundamental limits. As a result, these sensors have shown utility in a wide range of research domains spanning both science and technology. A rapidly emerging quantum sensing platform employs atomic-scale defects in crystals. In particular, magnetometry using nitrogen-vacancy (NV) color centers in diamond has garnered increasing interest. NV systems possess a combination of remarkable properties, optical addressability, long coherence times, and biocompatibility. Sensors based on NV centers excel in spatial resolution and magnetic sensitivity. These diamond-based sensors promise comparable combination of high spatial resolution and magnetic sensitivity without cryogenic operation. The above properties of NV magnetometers promise increasingly integrated quantum measurement technology, as a result, they have been extensively developed with various protocols and find use in numerous applications spanning materials characterization, nuclear magnetic resonance (NMR), condensed matter physics, paleomagnetism, neuroscience and living systems biology, and industrial vector magnetometry. In this chapter, NV centers are explored for magnetic sensing in a number of contexts. In general, we introduce novel regimes for magnetic-field probes with NV ensembles. Specifically, NV centers are developed for sensitive magnetometers for applications where microwaves (MWs) are prohibitively invasive and operations need to be carried out under zero ambient magnetic field. The primary goal of our discussion is to improve the utility of these NV center-based magnetometers.
Silicon carbide (SiC) is a promising platform for scalable quantum technologies owing to its well-established, wafer-scale industrial processing. SiC also hosts a variety of optically active color centres including the nitrogen vacancy defect that has a spin-triplet ground state. However, strong phonon coupling in the infrared range limits photon extraction from these defects. Here, we use nanophotonic structures, specifically micro-pillar and micro-disk resonators, to enhance optical collection and spin-readout. The micro-pillar geometry yields a 4-fold increase in photon collection, accompanied by a 2.4-fold reduction in spectral noise in optically detected magnetic resonance measurements. Consequently, the magnetic field sensitivity is improved by 24%. The large mode volume of the micro-disk supports resonances spanning 1150-1250 nm, enabling broadband coupling to nitrogen vacancy emission lines. Our results demonstrate that fabrication of scalable photonic structures efficiently improves performance of silicon carbide color centers for integrated quantum light generation and sensing.