The single-beam magneto-optical trap (MOT) based on the diffractive optical element offers a new route to develop compact cold atom sources. However, the optical efficiency in the previous single-beam MOT systems is usually low and unbalanced, which will affect the quality of the trapped atoms. To solve this issue, we developed a centimeter-scale dielectric metasurface optical chip with dynamic phase distributions, which was used to split a single incident laser beam into five separate ones with well-defined polarization states and uniform energy distributions. The measured diffraction efficiency of the metasurface is up to 47%. A single-beam MOT integrated with the metasurface optical chip was then used to trap the 87 Rb atoms with numbers ∼1.4 × 10 8 and temperatures ∼7.0 μK. The proposed concept in this work may provide a promising solution for developing ultracompact cold atom sources.
The single-beam magneto-optical trap (MOT) based on the diffractive optical element offers a new route to develop compact cold atom sources. However, the optical efficiency in the previous single-beam MOT systems is usually low and unbalanced, which will affect the quality of the trapped atoms. To solve this issue, we developed a centimeter-scale dielectric metasurface optical chip with dynamic phase distributions, which was used to split a single incident laser beam into five separate ones with well-defined polarization states and uniform energy distributions. The measured diffraction efficiency of the metasurface is up to 47%. A single-beam MOT integrated with the metasurface optical chip was then used to trap the 87 Rb atoms with numbers ∼1.4 × 10 8 and temperatures ∼7.0 μK. The proposed concept in this work may provide a promising solution for developing ultracompact cold atom sources.
Cold atoms produced in magneto-optical traps (MOTs) have underpinned advances in emerging quantum technologies, including quantum computing, precision metrology, and fundamental physics. Grating-based MOT (gMOT), which employs a reflective diffraction grating to enable laser cooling from a single incident beam, offers a compact alternative to conventional six-beam MOTs. However, the inherent asymmetry of gMOT beam geometry can compromise the trapping stability and efficiency, particularly for atomic species with complex internal level structures. Here, we present a geometric-phase dielectric metasurface that simultaneously engineers the transmitted and diffracted wavefronts with desired polarization states, enabling full MOT operation under axial illumination using a single planar optical element. This metasurface-based architecture restores the symmetry in the trapping forces while preserving the compactness and simplicity of gMOTs. Using this approach, we demonstrate the trapping and cooling of cesium─an atomic species widely regarded as challenging for standard gMOT implementations─and analyze the trapping mechanism through numerical calculations. By providing independent control over key trapping parameters within a planar and alignment-simplified platform, this work establishes a route toward compact, robust, and species-flexible cold-atom systems, thereby expanding the applicability of miniaturized MOTs for integrated quantum technologies.
Magneto-optical traps (MOTs), indispensable to cold-atom-based quantum computing and quantum precision measurement, are increasingly desired in compact and stable form. Particularly, the six-beam 3D-MOT, distinguished by symmetric geometry and superior trapping performance, finds particularly broad applications. Conventional implementations, however, rely on complex and bulky free-space optics, hindering miniaturization, practical assembly, and long-term stability. Here, we demonstrate a compact six-beam 3D-MOT system that employs two multifunctional optical metasurface chips to implement the optical-field functionalities required for cooling and trapping atoms. By combining two metasurface chips and a vacuum cell, a photonic-integrated cell module (PICM) is implemented as the core assembly and the volume is only" 73*73*107 mm^3" . In success, 1.3 * 10^3 Rb atoms are trapped and cooled to the temperature of ~183 μK. It should be noticed that the laser beam is guided to the metasurface through optical fiber, thus such fully fiber-coupled architecture enables straightforward and stable operations. We believe that this work would pave a practical route toward compact and portable 3D-MOT.
Abstract Diffraction gratings have simplified the optical implementation of magneto-optical traps (MOTs) to require only a single input beam, however reaching high atom number and fast loading has proven to be a challenge. We equipped an atom chip with a grating surface and paired it with a velocity-tunable 2D+-MOT as an atomic source to facilitate efficient loading together with magnetic trapping. Using uniform grating illumination, we magneto-optically trap 1.0 ( 1 ) × 10 9 atoms within one second, cool them to 14.1 ( 3 ) μ K , and transfer a quarter of them into the magnetic chip trap. This is a key step towards simple portable quantum sensors employing (ultra-)cold atoms.
Abstract Laser-cooled atoms are a key technology for many calibration-free measurement platforms—including clocks, gyroscopes, and gravimeters—and are a promising system for quantum networking and quantum computing. The optics and vacuum hardware required to prepare these gases are often bulky and not amenable to large-volume manufacturing, limiting the practical realization of devices benefiting from the properties of cold atoms. Planar, lithographically produced optics including photonic integrated circuits, optical metasurfaces (MSs), and gratings offer a pathway to develop chip-scale, manufacturable devices utilizing cold atoms. As a demonstration of this technology, we have realized laser cooling of atomic Rb in a grating-type magneto-optical trap (MOT) using planar optics for beam launching, beam shaping, and polarization control. Efficient use of available light is accomplished using MS-enabled beam shaping, and the performance of the planar optics MOT is competitive with Gaussian-beam illuminated grating MOTs.
Compact, lightweight, and energy-efficient cold atom systems are crucial for advancing quantum technologies, yet their realization remains constrained by the bulky optical and magnetic components required in current atom trapping architectures. Here, we demonstrate a low-SWaP magneto-optical trap that seamlessly integrates planar optical and magnetic components into a unified platform. A monolithic dual-functional metasurface simultaneously polarized and shapes the cooling beam, replacing traditional lens-waveplate assemblies and converting a linearly polarized Gaussian beam into a circularly polarized flat-top beam. In parallel, a planar coil chip substitutes bulky anti-Helmholtz cols and generated the required quadrupole magnetic field with drastically reduced power consumption. Under D2 line cooling of 87Rb atoms, the fully planar system delivers nearly an order-of-magnitude improvement in trapping performance while operating at a fraction of the size, weight, and power of traditional systems. This compact, bulky-component-free approach offers a scalable, energy-efficient pathway toward chip-scale cold atom platforms.