Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review Applied

High-Sensitivity Rydberg-Atom-Based Phase-Modulation Receiver for Frequency-Division-Multiplexing Communication

Yafen Cai, Shuai Shi, Yijia Zhou, Yitong Li, Jianhao Yu, Weibin Li, Lin Li

Published Apr 25, 2023• 39 citations
Publisher

Abstract

Due to the exaggerated properties of highly excited atomic states, a Rydberg-atom-based microwave receiver holds the promise to achieve superior performances in microwave metrology and communication when compared to conventional antennas. However, developing long-distance communication applications based on Rydberg atomic receiver remains challenging, because it requires the simultaneous achievement of low bit error rate (BER), high symbol rate, and weak carrier amplitude. The key to tackle this problem is to encode the information with a proper scheme that maintains high sensitivity and robustness of the Rydberg atomic receiver. Here, we use Rydberg atom-based heterodyne detection for the reception of phase-modulated microwave field, and demonstrate more than one order of magnitude improvement in reception sensitivity compared to the previously investigated amplitude-modulation scheme. Therefore, we achieve low BER communication with high symbol rate of 12 k bit/s and weak carrier amplitude of $13\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{V}\phantom{\rule{0.2em}{0ex}}{\mathrm{cm}}^{\ensuremath{-}1}$ simultaneously. Furthermore, we also demonstrate that our scheme is compatible with frequency-division-multiplexing communication.

DOI
10.1103/physrevapplied.19.044079

Related papers

Atomic Receiver by Utilizing Multiple Radio-Frequency Coupling at Rydberg States of Rubidium

Haiyang Zou, Zhenfei Song, Huihui Mu +3 more

Rydberg atoms have been extensively utilized in microwave measurement with high sensitivity, which has great potential in the field of communication. In this study, we discuss the digital communication based on a Rydberg atomic receiver under simultaneously coupling by resonant and near detuning microwaves. In addition, we verify the feasibility of the Rydberg atom-based frequency division multiplexing (FDM) in microwave communication. We demonstrate the principle and performance of the atom-based FDM receiver by applying amplitude modulation (AM) and frequency modulation (FM), respectively. To demonstrate the actual communication performance at different data transfer rates, we consider monochromatic images as an example. The experimental results show that the maximum acceptable data transfer rate of both AM and FM is about 200 kbps, whereas their maximum bit error rates (BER) is less than 5%. When compared with the traditional electronic receiver, this atomic receiver, which is compatible with FDM, has numerous advantages, such as small size, low power consumption, and high sensitivity. Furthermore, this receiver has a strong ability of anti-electromagnetic interference, and the signals transmitted do not interfere with each other in different channels.

Applied Sciences•Feb 16, 2020•44 citations

Quantum-Based Amplitude Modulation Radio Receiver Using Rydberg Atoms

Zhenfei Song, Wanfeng Zhang, Xiaochi Liu +4 more

The highly-excited Rydberg states are with a unique property of radio-frequency (RF) resonance, and Rydberg atoms at room temperature are promising for developing a broadband RF electric field sensor and relevant metrology standards. In this paper, the working mechanism of an atomic amplitude-modulation(AM) radio receiver is investigated in detail, and various factors affecting the communication quality are discussed. The modulation RF signal can be directly retrieved by measuring the transmission of a probe laser at resonance of rubidium D2 transition using a fast photo-diode detector, without any conventional demodulation process. Various communication experiments are tested at a 10.22 GHz carrier, and a modulation bandwidth of 1 MHz and an acceptable data transfer rate of about 1 Mbps have been achieved using current detection techniques. Owing to a potential high sensitivity and ultra-broadband capability of free-space RF field sensing, the quantum receiver has great significance compared with conventional electronics-based receivers, including but not limited to a weak signal, long-distance, and broadband communication in free space or via a fiber link.

IEEE Globecom Workshops (GC Wkshps)•Dec 1, 2018•8 citations

Rydberg atom-based AM receiver with a weak continuous frequency carrier

Huaqiang Li, Jinlian Hu, Jingxu Bai +4 more

We demonstrate an atom-based amplitude-modulation (AM) receiver for digital communication with a weak continuous frequency carrier using a Rydberg AC Stark effect in a vapor cell and achieve the operating carrier frequency continuously from 0.1 GHz to 5 GHz at a single Rydberg state. A strong local oscillator (LO) field E LO acts as a gain to shift the Rydberg level to a high sensitivity region, and a weak carrier field E Carr keeps the same frequency with the LO field. The digital baseband signals are encoded onto the E Carr using the amplitude modulation technique with the different modulation frequency. The response of Rydberg atom to the baseband signal is probed via a Rydberg electromagnetically induced transparency (EIT). The measured instantaneous bandwidth of the system is about 230 kHz. To demonstrate the performance of our system for an actual communication, we consider a color image as an example, the received image displays that the bit error rate (BER) is less than 5% when the maximum data transfer rate is about 238 kbps. Meanwhile, our system shows the weak carrier field of E Carr ≥ 13.52 μ V/cm can be used for the practical communication with BER less than 5%. Our works break the limitation that EIT-AT based atomic receivers only operate at the near resonant frequencies of the Rydberg transitions, making this emerging of quantum technology close to the practical application with high sensitivity and broad bandwidth.

Optics Express•Mar 31, 2022•47 citations

Continuous-Frequency Microwave Heterodyne Detection in an Atomic Vapor Cell

Xiao-Hong Liu, Kai-Yu Liao, Zuan-Xian Zhang +8 more

Atomic heterodyne dressed by a local oscillator resonant with Rydberg transitions allows high sensitivity and robust phase measurement of a microwave electric field, but it is typically limited to detection of discrete frequencies within the narrow bandwidth of Rydberg transitions. Here we demonstrate an atomic heterodyne scheme for continuous-frequency electric field measurement based on multilevel Rydberg atoms in a room-temperature vapor cell. Driven by two off-resonant microwaves acting as a tunable local oscillator field, the heterodyne receiver can retrieve the amplitude, phase, and frequency information of signal microwave in a continuous frequency band. In our experiment, the receiver achieves an electric field sensitivity of up to $1.5\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{V}\phantom{\rule{0.2em}{0ex}}{\mathrm{cm}}^{\ensuremath{-}1}\phantom{\rule{0.2em}{0ex}}{\mathrm{Hz}}^{\ensuremath{-}1/2}$, 80-dB linear dynamic range, and over 1 GHz of continuous frequency range. We also demonstrate the reliable reception of continuously tunable phase-modulated carriers in the digital communication. This work will facilitate the application of atomic heterodyne in the areas such as radar technique, radio monitoring, and radio astronomy.

Physical Review Applied•Nov 2, 2022•67 citations

Warm Rydberg atom-based quadrature amplitude-modulated receiver

Jan Nowosielski, Marcin Jastrzębski, Pavel Halavach +5 more

Rydberg atoms exhibit both remarkable sensitivity to electromagnetic fields making them promising candidates for revolutionizing field sensors and, unlike conventional antennas, they neither disturb the measured field nor necessitate extensive calibration procedures. In this study, we propose a receiver design for data-modulated signal reception near the 2.4 GHz Wi-Fi frequency band, harnessing the capabilities of warm Rydberg atoms. Our focus lies on exploring various quadrature amplitude modulations and transmission frequencies through heterodyne detection. We offer a comprehensive characterization of our setup, encompassing the atomic response frequency range, attainable electric field amplitudes, and sensitivity, which we estimate to be equal to 0.50 µV cm −1 Hz −0.5 . Additionally, we delve into analyzing communication errors using Voronoi diagrams and evaluating the communication channel capacity across different modulation schemes. We find that the maximum achievable capacity for a single communication channel equals 19.3 Mbps and can be achieved using the Q A M 4 scheme.

arXiv:2405.02901•Optics Express•Jul 25, 2024•17 citations

Low-Frequency Communication Based on Rydberg-Atom Receiver

Yipeng Xie, Mingwei Lei, Jianquan Zhang +2 more

Rydberg-atom receivers have developed rapidly with increasing sensitivity. However, studies on their application in low-frequency electric fields remain limited. In this work, we demonstrate low-frequency communication using an electrode-embedded atom cell and a whip antenna without the need for a low-noise amplifier (LNA). Three modulations—binary phase-shift keying (BPSK), on–off keying (OOK), and two-frequency shift keying (2FSK)—were employed for communication using a Rydberg-atom receiver operating near 100 kHz. The signal-to-noise ratio (SNR) of the modulated low-frequency signal received by Rydberg atoms was measured at various emission voltages. Additionally, we demonstrated the in-phase and quadrature (IQ) constellation diagram, error vector magnitude (EVM), and eye diagram of the demodulated signal at different symbol rates. The EVM values were measured to be 8.8% at a symbol rate of 2 kbps, 9.4% at 4 kbps, and 13.7% at 8 kbps. The high-fidelity digital color image transmission achieved a peak signal-to-noise ratio (PSNR) of 70 dB. Our results demonstrate the feasibility of a Rydberg-atom receiver for low-frequency communication applications.

arXiv:2408.09681•Electronics•Mar 6, 2025•8 citations
Due to the exaggerated properties of highly excited atomic states, a Rydberg-atom-based microwave receiver holds the promise to achieve superior performances in microwave metrology and communication when compared to conventional antennas. However, developing long-distance communication applications based on Rydberg atomic receiver remains challenging, because it requires the simultaneous achievement of low bit error rate (BER), high symbol rate, and weak carrier amplitude. The key to tackle this problem is to encode the information with a proper scheme that maintains high sensitivity and robustness of the Rydberg atomic receiver. Here, we use Rydberg atom-based heterodyne detection for the reception of phase-modulated microwave field, and demonstrate more than one order of magnitude improvement in reception sensitivity compared to the previously investigated amplitude-modulation scheme. Therefore, we achieve low BER communication with high symbol rate of 12 k bit/s and weak carrier amplitude of 13\ensuremath\muVcm\ensuremath−113\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{V}\phantom{\rule{0.2em}{0ex}}{\mathrm{cm}}^{\ensuremath{-}1}13\ensuremath\muVcm\ensuremath−1 simultaneously. Furthermore, we also demonstrate that our scheme is compatible with frequency-division-multiplexing communication.
Rydberg atoms have been extensively utilized in microwave measurement with high sensitivity, which has great potential in the field of communication. In this study, we discuss the digital communication based on a Rydberg atomic receiver under simultaneously coupling by resonant and near detuning microwaves. In addition, we verify the feasibility of the Rydberg atom-based frequency division multiplexing (FDM) in microwave communication. We demonstrate the principle and performance of the atom-based FDM receiver by applying amplitude modulation (AM) and frequency modulation (FM), respectively. To demonstrate the actual communication performance at different data transfer rates, we consider monochromatic images as an example. The experimental results show that the maximum acceptable data transfer rate of both AM and FM is about 200 kbps, whereas their maximum bit error rates (BER) is less than 5%. When compared with the traditional electronic receiver, this atomic receiver, which is compatible with FDM, has numerous advantages, such as small size, low power consumption, and high sensitivity. Furthermore, this receiver has a strong ability of anti-electromagnetic interference, and the signals transmitted do not interfere with each other in different channels.
The highly-excited Rydberg states are with a unique property of radio-frequency (RF) resonance, and Rydberg atoms at room temperature are promising for developing a broadband RF electric field sensor and relevant metrology standards. In this paper, the working mechanism of an atomic amplitude-modulation(AM) radio receiver is investigated in detail, and various factors affecting the communication quality are discussed. The modulation RF signal can be directly retrieved by measuring the transmission of a probe laser at resonance of rubidium D2 transition using a fast photo-diode detector, without any conventional demodulation process. Various communication experiments are tested at a 10.22 GHz carrier, and a modulation bandwidth of 1 MHz and an acceptable data transfer rate of about 1 Mbps have been achieved using current detection techniques. Owing to a potential high sensitivity and ultra-broadband capability of free-space RF field sensing, the quantum receiver has great significance compared with conventional electronics-based receivers, including but not limited to a weak signal, long-distance, and broadband communication in free space or via a fiber link.
We demonstrate an atom-based amplitude-modulation (AM) receiver for digital communication with a weak continuous frequency carrier using a Rydberg AC Stark effect in a vapor cell and achieve the operating carrier frequency continuously from 0.1 GHz to 5 GHz at a single Rydberg state. A strong local oscillator (LO) field E LO acts as a gain to shift the Rydberg level to a high sensitivity region, and a weak carrier field E Carr keeps the same frequency with the LO field. The digital baseband signals are encoded onto the E Carr using the amplitude modulation technique with the different modulation frequency. The response of Rydberg atom to the baseband signal is probed via a Rydberg electromagnetically induced transparency (EIT). The measured instantaneous bandwidth of the system is about 230 kHz. To demonstrate the performance of our system for an actual communication, we consider a color image as an example, the received image displays that the bit error rate (BER) is less than 5% when the maximum data transfer rate is about 238 kbps. Meanwhile, our system shows the weak carrier field of E Carr ≥ 13.52 μ V/cm can be used for the practical communication with BER less than 5%. Our works break the limitation that EIT-AT based atomic receivers only operate at the near resonant frequencies of the Rydberg transitions, making this emerging of quantum technology close to the practical application with high sensitivity and broad bandwidth.
Atomic heterodyne dressed by a local oscillator resonant with Rydberg transitions allows high sensitivity and robust phase measurement of a microwave electric field, but it is typically limited to detection of discrete frequencies within the narrow bandwidth of Rydberg transitions. Here we demonstrate an atomic heterodyne scheme for continuous-frequency electric field measurement based on multilevel Rydberg atoms in a room-temperature vapor cell. Driven by two off-resonant microwaves acting as a tunable local oscillator field, the heterodyne receiver can retrieve the amplitude, phase, and frequency information of signal microwave in a continuous frequency band. In our experiment, the receiver achieves an electric field sensitivity of up to $1.5\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{V}\phantom{\rule{0.2em}{0ex}}{\mathrm{cm}}^{\ensuremath{-}1}\phantom{\rule{0.2em}{0ex}}{\mathrm{Hz}}^{\ensuremath{-}1/2}$, 80-dB linear dynamic range, and over 1 GHz of continuous frequency range. We also demonstrate the reliable reception of continuously tunable phase-modulated carriers in the digital communication. This work will facilitate the application of atomic heterodyne in the areas such as radar technique, radio monitoring, and radio astronomy.
Rydberg atoms exhibit both remarkable sensitivity to electromagnetic fields making them promising candidates for revolutionizing field sensors and, unlike conventional antennas, they neither disturb the measured field nor necessitate extensive calibration procedures. In this study, we propose a receiver design for data-modulated signal reception near the 2.4 GHz Wi-Fi frequency band, harnessing the capabilities of warm Rydberg atoms. Our focus lies on exploring various quadrature amplitude modulations and transmission frequencies through heterodyne detection. We offer a comprehensive characterization of our setup, encompassing the atomic response frequency range, attainable electric field amplitudes, and sensitivity, which we estimate to be equal to 0.50 µV cm −1 Hz −0.5 . Additionally, we delve into analyzing communication errors using Voronoi diagrams and evaluating the communication channel capacity across different modulation schemes. We find that the maximum achievable capacity for a single communication channel equals 19.3 Mbps and can be achieved using the Q A M 4 scheme.
Rydberg-atom receivers have developed rapidly with increasing sensitivity. However, studies on their application in low-frequency electric fields remain limited. In this work, we demonstrate low-frequency communication using an electrode-embedded atom cell and a whip antenna without the need for a low-noise amplifier (LNA). Three modulations—binary phase-shift keying (BPSK), on–off keying (OOK), and two-frequency shift keying (2FSK)—were employed for communication using a Rydberg-atom receiver operating near 100 kHz. The signal-to-noise ratio (SNR) of the modulated low-frequency signal received by Rydberg atoms was measured at various emission voltages. Additionally, we demonstrated the in-phase and quadrature (IQ) constellation diagram, error vector magnitude (EVM), and eye diagram of the demodulated signal at different symbol rates. The EVM values were measured to be 8.8% at a symbol rate of 2 kbps, 9.4% at 4 kbps, and 13.7% at 8 kbps. The high-fidelity digital color image transmission achieved a peak signal-to-noise ratio (PSNR) of 70 dB. Our results demonstrate the feasibility of a Rydberg-atom receiver for low-frequency communication applications.