Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

ACS Photonics

Noise Cancellation Effects in Integrated Photonics with Wilkinson Power Dividers

Angel Ortega‐Gomez, Osmery Hernández, Douglas Oña, Carlos Biurrun-Quel, Carlos del Río Bocio, Iñigo Liberal

Published Apr 12, 2023• 2 citations
Publisher

Abstract

High Resolution Image Download MS PowerPoint Slide Wilkinson power dividers (WPDs) are a popular element in RF and microwave technologies known for providing isolation capabilities. However, the benefits that WPDs could offer to integrated photonic systems are far less studied. Here, we investigate the thermal emission from and the noise performance of silicon-on-insulator (SOI) WPDs. We find that WPDs exhibit a noiseless port, with important implications for receiving systems and absorption-based quantum state transformations. At the same time, the thermal signals exiting noisy ports exhibit nontrivial correlations, opening the possibility for noise cancellation. We analyze passive and active networks containing WPDs showing how such nontrivial correlations can prevent the amplification of the thermal noise introduced by WPDs while benefiting from their isolation capabilities. Using this insight, we propose a modified ring-resonator amplifier that improves by N times the SNR in comparison with conventional traveling wave and ring-resonator amplifiers, with N being the number of inputs/outputs of the WPD. We believe that our results represent an important step forward in the implementation of SOI-WPDs and their integration in complex photonic networks, particularly for mid-IR and quantum photonics applications.

DOI
10.1021/acsphotonics.2c01675

Related papers

An integrated photonic millimeter-wave receiver with sub-ambient noise temperature

Junyin Zhang, Shuhang Zheng, Jiachen Cai +7 more

Growing demands for timing precision in positioning systems, and resolution in atmospheric sensing and automotive radar, have extended receiver frontends into the millimetre-wave and THz regimes. At these frequencies, the noise performance of field-effect transistors used in low-noise amplifiers degrades rapidly due to parasitic effects, limited carrier mobility, hot electrons, and shot noise. Parametric transducers that couple electromagnetic signals to optical fields can offer quantum-limited sensitivity at room temperature. Electro-optic materials can enable receivers that transduce radiofrequency signals into optical phase shifts. Yet to date, room-temperature receivers using electro-optical detection have not attained a noise figure comparable to the electronic amplifiers. Here we demonstrate a room-temperature cavity electro-optic-based millimetre-wave receiver on a lithium tantalate photonic integrated circuit, achieving an on-chip photon-number transduction efficiency of 10%. The equivalent input-referred receiver-added noise temperatures reach $110\,\mathrm{K}$ on-chip and $202^{+35}_{-33}\,\mathrm{K}$ for the full system at 60.5 GHz, with noise figure matching state-of-the-art V-band electronic low-noise amplifiers. We resolve the thermal noise in cavity electro-optic transducers, showing that the system is limited by thermal photon occupation ($\sim$100) in the millimetre-wave cavity and optical vacuum noise, with no measurable excess noise. Our work demonstrates that integrated photonics can reach state-of-the-art electronic receiver noise performance while offering high-radiofrequency-power survivability and compatibility with remote optical readout. This establishes cavity electro-optics as a low-noise, electromagnetic interference-resilient, chip-scale receiver frontend for millimetre-wave applications, enabling scalable analogue processing in the optical domain.

physics.opticsCross-listedarXiv:2510.06176•Oct 8, 2025

Path to increasing the coincidence efficiency of integrated resonant photon sources

C. C. Tison, J. A. Steidle, M. L. Fanto +5 more

Silicon ring resonators are used as photon pair sources by taking advantage of silicon's large third order nonlinearity with a process known as spontaneous four wave mixing. These sources are capable of producing pairs of indistinguishable photons but typically suffer from an effective $50\%$ loss. By slightly decoupling the input waveguide from the ring, the drop port coincidence ratio can be significantly increased with the trade-off being that the pump is less efficiently coupled into the ring. Ring resonators with this design have been demonstrated having coincidence ratios of $\sim 96\%$ but requiring a factor of $\sim 10$ increase in the pump power. Through the modification of the coupling design that relies on additional spectral dependence, it is possible to achieve similar coincidence ratios without the increased pumping requirement. This can be achieved by coupling the input waveguide to the ring multiple times, thus creating a Mach-Zehnder interferometer. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Recently, this device has been realized with preliminary results exhibiting the desired spectral dependence and with a coincidence ratio as high as $\sim 97\%$ while allowing the pump to be nearly critically coupled to the ring. The demonstrated near unity coincidence ratio infers a near maximal heralding efficiency from the fabricated device. This device has the potential to greatly improve the scalability and performance of quantum computing and communication systems.

arXiv:1703.08368•Optics Express•Dec 20, 2017•49 citations

Development of a High Performance Resonant Photon-Pair Source in Silicon

Jeffrey A. Steidle

One of the key building blocks of quantum photonic systems is a source of indistinguishable photons. Silicon ring resonators can be used as photon pair sources by taking advantage of silicon's large third order nonlinearity with a process known as spontaneous four wave mixing. These sources are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50% loss. By slightly decoupling the input waveguide from the ring, the desired photons generated in the ring can be directed to the drop port. Thus, the ratio between the coincidences from the drop port and the total number of coincidences from all ports (coincidence efficiency) can be significantly increased, with the trade-off being that the pump is less efficiently coupled into the ring. This asymmetric coupling scheme was used to demonstrate a dual-bus microring source with a coincidence efficiency of ~96%. Unfortunately, the penalty to pump power was quite large, with a required ~10x increase in the pump power to maintain the same pair generation rate.\nTo further improve upon this result, a microring source was designed with multipoint evanescent couplers to induce a strong spectral dependence in the coupling coefficients. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a ring-based photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Asymmetric coupling was also used in this configuration but in a different way than in the previous source. In this case, the input side of the ring was configured to be critically coupled for maximal resonance enhancement while the output side was configured to be over coupled to minimize photon-pair loss within the ring. This device design was used to demonstrate a photon-pair source with coincidence efficiencies of 0.9981+-6.425x10^-4 and 0.9979+-1.665x10^-3 for degenerate and non-degenerate pump configuration respectively.\nIn addition to the source development, work was done to move some of the pump rejection filtering onto the photonic chip. While the fabricated device only exhibited an extinction of 50 dB, the root cause of the limited extinction was explored and a new filter design was proposed to overcome these limitations. With the combination of the microring source with its greatly improved efficiency and the movement toward reducing the required off-chip filtering, this work represents a significant advancement in the scalability of integrated quantum photonic systems which can enable high performance quantum computing and communication systems.

•Jan 1, 2019•0 citations

Traveling-Wave Parametric Amplifier with Passive Reverse Isolation

C. Kow, M. T. Bell

Traveling-wave parametric amplifiers (TWPAs) have attracted much attention for their broadband amplification and near-quantum-limited noise performance. TWPAs are nonreciprocal by nature providing gain for forward-propagating signals and transmission line losses for backward traveling waves. This intrinsic nonreciprocity is insufficient to protect sensitive quantum devices from backaction due to noise from warmer amplification stages in practical systems, and requires the use of bulky cryogenic isolators. We present a multistage TWPA (mTWPA) that addresses this limitation by achieving passive in-band reverse isolation alongside near-quantum-limited noise performance. The multistage architecture consists of two mode conversion stages and a reflectionless high-pass filter that provides the passive isolation. Experimental measurements of a prototype mTWPA demonstrated 20 dB of forward gain across a 1.6 GHz bandwidth and greater than 35 dB of reverse isolation. Noise measurements indicate performance at 1.7 times the quantum limit. This demonstrates that the increased complexity of a multistage TWPA design does not lead to significant added noise. The designed distribution of gain across the stages is engineered to minimize internal amplifier noise at the input, and we propose further optimization strategies in redistribution of the gain between the stages. This level of isolation mitigates noise from warmer amplification stages, matching the performance of conventional isolators. The passive reverse isolation of the mTWPA, allows for the amplifier to operate in pulsed mode where the amplifier is off during qubit gate operations and is turned on during readout allowing for an isolator free scalable readout architecture.

arXiv:2505.04059•Physical Review X•Feb 13, 2026•8 citations

Integrated photon sources for quantum information science applications

Paul M. Alsing, Dirk Robert Englund, Neville A. Mogent +8 more

Ring resonators are used as photon pair sources by taking advantage of the materials second or third order non- linearities through the processes of spontaneous parametric downconversion and spontaneous four wave mixing respectively. Two materials of interest for these applications are silicon for the infrared and aluminum nitride for the ultraviolet through the infrared. When fabricated into ring type sources they are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50% loss. By slightly decoupling the input waveguide from the ring, the drop port coincidence ratio can be significantly increased with the trade-off being that the pump is less efficiently coupled into the ring. Ring resonators with this design have been demonstrated having coincidence ratios of 96% but requiring a factor of ~10 increase in the pump power. Through the modification of the coupling design that relies on additional spectral dependence, it is possible to achieve similar coincidence ratios without the increased pumping requirement. This can be achieved by coupling the input waveguide to the ring multiple times, thus creating a Mach-Zehnder interferometer. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Recently, this device has been realized with preliminary results exhibiting the desired spectral dependence and with a coincidence ratio as high as ~ 97% while allowing the pump to be nearly critically coupled to the ring. The demonstrated near unity coincidence ratio infers a near maximal heralding efficiency from the fabricated device. This device has the potential to greatly improve the scalability and performance of quantum computing and communication systems.

•Oct 5, 2017•1 citation

Design of AlGaN microring resonators for broadband biphoton excitation

Vittorio M. N. Passaro, Francesco De Leonardis, Richard A. Soref

Nowadays, Quantum Photonics finds a number of significant applications, such as Quantum Computing and Quantum Communication. Silicon on Insulator (SOI) technology has proven its potential for the generation of correlated photon pairs through the spontaneous four wave mixing (SFWM) effect, but not in the visible wavelength range. In this invited paper we present the physical investigation and design guidelines of AlGaN microring resonators for generating photon entanglement, as induced by SFWM in the visible. The work theoretically demonstrates the possibility of realizing the on-chip generation of correlated pairs of photons within integrated microring resonators based on the AlGaN/AlN technological platform, due to its wide bandgap, crystalline structure and low losses. Furthermore, general physical features are presented by means of a parametric analysis of the biphoton flux and cross correlation as a function of the device parameters, i.e. ring radius, resonator cross section and sizes, pulley coupling. Moreover, the spectral features of the generated signal and idler photons have been analyzed as a function of the pump resonance mismatch for several Kerr coefficients and input visible “blue” pump powers. Cross correlation values around 2.3 ×104at a biphoton flux of about 9×104pairs/s and 2×103at about 2.9×106pairs/s for ring radius of 200 μm and 30 μm have been achieved, respectively, assuming a input pump power of 25 mW, while the signal is generated at wavelength of 369.5 nm and idler at 535.72 nm, for ring radius of 200 μm, and 369.5 and 457.45 nm for ring radius of 30 μm, respectively. These devices can be important for many applications, going from UV-visible spectroscopy to quantum sensing to image processing to nonlinear optics.

IEEE International Conference on IC Design and Technology (ICICDT)•Jun 1, 2018•0 citations
High Resolution Image Download MS PowerPoint Slide Wilkinson power dividers (WPDs) are a popular element in RF and microwave technologies known for providing isolation capabilities. However, the benefits that WPDs could offer to integrated photonic systems are far less studied. Here, we investigate the thermal emission from and the noise performance of silicon-on-insulator (SOI) WPDs. We find that WPDs exhibit a noiseless port, with important implications for receiving systems and absorption-based quantum state transformations. At the same time, the thermal signals exiting noisy ports exhibit nontrivial correlations, opening the possibility for noise cancellation. We analyze passive and active networks containing WPDs showing how such nontrivial correlations can prevent the amplification of the thermal noise introduced by WPDs while benefiting from their isolation capabilities. Using this insight, we propose a modified ring-resonator amplifier that improves by N times the SNR in comparison with conventional traveling wave and ring-resonator amplifiers, with N being the number of inputs/outputs of the WPD. We believe that our results represent an important step forward in the implementation of SOI-WPDs and their integration in complex photonic networks, particularly for mid-IR and quantum photonics applications.
Growing demands for timing precision in positioning systems, and resolution in atmospheric sensing and automotive radar, have extended receiver frontends into the millimetre-wave and THz regimes. At these frequencies, the noise performance of field-effect transistors used in low-noise amplifiers degrades rapidly due to parasitic effects, limited carrier mobility, hot electrons, and shot noise. Parametric transducers that couple electromagnetic signals to optical fields can offer quantum-limited sensitivity at room temperature. Electro-optic materials can enable receivers that transduce radiofrequency signals into optical phase shifts. Yet to date, room-temperature receivers using electro-optical detection have not attained a noise figure comparable to the electronic amplifiers. Here we demonstrate a room-temperature cavity electro-optic-based millimetre-wave receiver on a lithium tantalate photonic integrated circuit, achieving an on-chip photon-number transduction efficiency of 10%. The equivalent input-referred receiver-added noise temperatures reach 110 K110\,\mathrm{K}110K on-chip and 202−33+35 K202^{+35}_{-33}\,\mathrm{K}202−33+35​K for the full system at 60.5 GHz, with noise figure matching state-of-the-art V-band electronic low-noise amplifiers. We resolve the thermal noise in cavity electro-optic transducers, showing that the system is limited by thermal photon occupation ($\sim$100) in the millimetre-wave cavity and optical vacuum noise, with no measurable excess noise. Our work demonstrates that integrated photonics can reach state-of-the-art electronic receiver noise performance while offering high-radiofrequency-power survivability and compatibility with remote optical readout. This establishes cavity electro-optics as a low-noise, electromagnetic interference-resilient, chip-scale receiver frontend for millimetre-wave applications, enabling scalable analogue processing in the optical domain.
Silicon ring resonators are used as photon pair sources by taking advantage of silicon's large third order nonlinearity with a process known as spontaneous four wave mixing. These sources are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50%50\%50% loss. By slightly decoupling the input waveguide from the ring, the drop port coincidence ratio can be significantly increased with the trade-off being that the pump is less efficiently coupled into the ring. Ring resonators with this design have been demonstrated having coincidence ratios of ∼96%\sim 96\%∼96% but requiring a factor of ∼10\sim 10∼10 increase in the pump power. Through the modification of the coupling design that relies on additional spectral dependence, it is possible to achieve similar coincidence ratios without the increased pumping requirement. This can be achieved by coupling the input waveguide to the ring multiple times, thus creating a Mach-Zehnder interferometer. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Recently, this device has been realized with preliminary results exhibiting the desired spectral dependence and with a coincidence ratio as high as ∼97%\sim 97\%∼97% while allowing the pump to be nearly critically coupled to the ring. The demonstrated near unity coincidence ratio infers a near maximal heralding efficiency from the fabricated device. This device has the potential to greatly improve the scalability and performance of quantum computing and communication systems.
One of the key building blocks of quantum photonic systems is a source of indistinguishable photons. Silicon ring resonators can be used as photon pair sources by taking advantage of silicon's large third order nonlinearity with a process known as spontaneous four wave mixing. These sources are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50% loss. By slightly decoupling the input waveguide from the ring, the desired photons generated in the ring can be directed to the drop port. Thus, the ratio between the coincidences from the drop port and the total number of coincidences from all ports (coincidence efficiency) can be significantly increased, with the trade-off being that the pump is less efficiently coupled into the ring. This asymmetric coupling scheme was used to demonstrate a dual-bus microring source with a coincidence efficiency of ~96%. Unfortunately, the penalty to pump power was quite large, with a required ~10x increase in the pump power to maintain the same pair generation rate.\nTo further improve upon this result, a microring source was designed with multipoint evanescent couplers to induce a strong spectral dependence in the coupling coefficients. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a ring-based photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Asymmetric coupling was also used in this configuration but in a different way than in the previous source. In this case, the input side of the ring was configured to be critically coupled for maximal resonance enhancement while the output side was configured to be over coupled to minimize photon-pair loss within the ring. This device design was used to demonstrate a photon-pair source with coincidence efficiencies of 0.9981+-6.425x10^-4 and 0.9979+-1.665x10^-3 for degenerate and non-degenerate pump configuration respectively.\nIn addition to the source development, work was done to move some of the pump rejection filtering onto the photonic chip. While the fabricated device only exhibited an extinction of 50 dB, the root cause of the limited extinction was explored and a new filter design was proposed to overcome these limitations. With the combination of the microring source with its greatly improved efficiency and the movement toward reducing the required off-chip filtering, this work represents a significant advancement in the scalability of integrated quantum photonic systems which can enable high performance quantum computing and communication systems.
Traveling-wave parametric amplifiers (TWPAs) have attracted much attention for their broadband amplification and near-quantum-limited noise performance. TWPAs are nonreciprocal by nature providing gain for forward-propagating signals and transmission line losses for backward traveling waves. This intrinsic nonreciprocity is insufficient to protect sensitive quantum devices from backaction due to noise from warmer amplification stages in practical systems, and requires the use of bulky cryogenic isolators. We present a multistage TWPA (mTWPA) that addresses this limitation by achieving passive in-band reverse isolation alongside near-quantum-limited noise performance. The multistage architecture consists of two mode conversion stages and a reflectionless high-pass filter that provides the passive isolation. Experimental measurements of a prototype mTWPA demonstrated 20 dB of forward gain across a 1.6 GHz bandwidth and greater than 35 dB of reverse isolation. Noise measurements indicate performance at 1.7 times the quantum limit. This demonstrates that the increased complexity of a multistage TWPA design does not lead to significant added noise. The designed distribution of gain across the stages is engineered to minimize internal amplifier noise at the input, and we propose further optimization strategies in redistribution of the gain between the stages. This level of isolation mitigates noise from warmer amplification stages, matching the performance of conventional isolators. The passive reverse isolation of the mTWPA, allows for the amplifier to operate in pulsed mode where the amplifier is off during qubit gate operations and is turned on during readout allowing for an isolator free scalable readout architecture.
Ring resonators are used as photon pair sources by taking advantage of the materials second or third order non- linearities through the processes of spontaneous parametric downconversion and spontaneous four wave mixing respectively. Two materials of interest for these applications are silicon for the infrared and aluminum nitride for the ultraviolet through the infrared. When fabricated into ring type sources they are capable of producing pairs of indistinguishable photons but typically suffer from an effective 50% loss. By slightly decoupling the input waveguide from the ring, the drop port coincidence ratio can be significantly increased with the trade-off being that the pump is less efficiently coupled into the ring. Ring resonators with this design have been demonstrated having coincidence ratios of 96% but requiring a factor of ~10 increase in the pump power. Through the modification of the coupling design that relies on additional spectral dependence, it is possible to achieve similar coincidence ratios without the increased pumping requirement. This can be achieved by coupling the input waveguide to the ring multiple times, thus creating a Mach-Zehnder interferometer. This coupler design can be used on both sides of the ring resonator so that resonances supported by one of the couplers are suppressed by the other. This is the ideal configuration for a photon-pair source as it can only support the pump photons at the input side while only allowing the generated photons to leave through the output side. Recently, this device has been realized with preliminary results exhibiting the desired spectral dependence and with a coincidence ratio as high as ~ 97% while allowing the pump to be nearly critically coupled to the ring. The demonstrated near unity coincidence ratio infers a near maximal heralding efficiency from the fabricated device. This device has the potential to greatly improve the scalability and performance of quantum computing and communication systems.
Nowadays, Quantum Photonics finds a number of significant applications, such as Quantum Computing and Quantum Communication. Silicon on Insulator (SOI) technology has proven its potential for the generation of correlated photon pairs through the spontaneous four wave mixing (SFWM) effect, but not in the visible wavelength range. In this invited paper we present the physical investigation and design guidelines of AlGaN microring resonators for generating photon entanglement, as induced by SFWM in the visible. The work theoretically demonstrates the possibility of realizing the on-chip generation of correlated pairs of photons within integrated microring resonators based on the AlGaN/AlN technological platform, due to its wide bandgap, crystalline structure and low losses. Furthermore, general physical features are presented by means of a parametric analysis of the biphoton flux and cross correlation as a function of the device parameters, i.e. ring radius, resonator cross section and sizes, pulley coupling. Moreover, the spectral features of the generated signal and idler photons have been analyzed as a function of the pump resonance mismatch for several Kerr coefficients and input visible “blue” pump powers. Cross correlation values around 2.3 ×104at a biphoton flux of about 9×104pairs/s and 2×103at about 2.9×106pairs/s for ring radius of 200 μm and 30 μm have been achieved, respectively, assuming a input pump power of 25 mW, while the signal is generated at wavelength of 369.5 nm and idler at 535.72 nm, for ring radius of 200 μm, and 369.5 and 457.45 nm for ring radius of 30 μm, respectively. These devices can be important for many applications, going from UV-visible spectroscopy to quantum sensing to image processing to nonlinear optics.